jcc7x7 Posted April 17, 2021 Share Posted April 17, 2021 Thought someone made a comp for these 929? other than the factory one Google isn't coming up with an answer!!! Next ? does any one know the thread pitch on the muzzle? Thanks Link to comment Share on other sites More sharing options...
missed it by that much Posted April 17, 2021 Share Posted April 17, 2021 I had doug Jones in Rochester mi make one for my older 8 shot 38 super revolver which was essentially the 929 without the titanium cylinder. Gave him the cover and and gun he made me a 3 port one. I just drove there as he is within two hours of me but I'm sure any competent gunsmith or machinist could make on. Link to comment Share on other sites More sharing options...
ysrracer Posted April 17, 2021 Share Posted April 17, 2021 1 hour ago, missed it by that much said: I had doug Jones in Rochester mi make one for my older 8 shot 38 super revolver which was essentially the 929 without the titanium cylinder. Gave him the cover and and gun he made me a 3 port one. I just drove there as he is within two hours of me but I'm sure any competent gunsmith or machinist could make on. Did it have any effect on muzzle flip? Because the factory one is useless. Link to comment Share on other sites More sharing options...
NoSteel Posted April 17, 2021 Share Posted April 17, 2021 3 hours ago, jcc7x7 said: Thought someone made a comp for these 929? other than the factory one Google isn't coming up with an answer!!! Next ? does any one know the thread pitch on the muzzle? Thanks No threads on muzzle. The factory comp is held on by a cap screw into the barrel rib. Link to comment Share on other sites More sharing options...
pskys2 Posted April 18, 2021 Share Posted April 18, 2021 1 hour ago, NoSteel said: No threads on muzzle. The factory comp is held on by a cap screw into the barrel rib. But is there enough meat to thread it for one? Then use the cap screw into the barrel rib to lock it in, might not have to use anything else but 242 loc-tite. Link to comment Share on other sites More sharing options...
jcc7x7 Posted April 18, 2021 Author Share Posted April 18, 2021 Honestly couldn't remember if there were threads on it. When I pulled my barrel to do the forcing cone, I lathed the nub off and crowned the bbl. But that was several years ago. Getting another from the family of a dear friend and going to set it up for open ICORE. Thought a better comp would be the way to go etc etc. Link to comment Share on other sites More sharing options...
ysrracer Posted April 18, 2021 Share Posted April 18, 2021 Does a 9mm loaded to minor make enough pressure to work a comp? Maybe a 90gr bullet going 1400fps? Link to comment Share on other sites More sharing options...
mchapman Posted April 18, 2021 Share Posted April 18, 2021 7 hours ago, jcc7x7 said: Thought someone made a comp for these 929? other than the factory one Google isn't coming up with an answer!!! Next ? does any one know the thread pitch on the muzzle? Thanks Dave Parker makes one that works, but you have machined off the nub of the barrel that the factory one used. This one mounts the same way so I think that you will have to maybe look for a different one. I think that Revolver supply is carrying them for Dave. Link to comment Share on other sites More sharing options...
AzShooter Posted April 18, 2021 Share Posted April 18, 2021 1 hour ago, ysrracer said: Does a 9mm loaded to minor make enough pressure to work a comp? Maybe a 90gr bullet going 1400fps? Comps work on the mighty .22s being used for Steel Challenge. It it helps .01 second per shot that would add up a lot on today's courses. Link to comment Share on other sites More sharing options...
jcc7x7 Posted April 18, 2021 Author Share Posted April 18, 2021 8 hours ago, mchapman said: Dave Parker makes one that works, but you have machined off the nub of the barrel that the factory one used. This one mounts the same way so I think that you will have to maybe look for a different one. I think that Revolver supply is carrying them for Dave. I've got ANOTHER one coming. I was friends with the RO that got killed at the uspsa match last year. His family reached out and asked if I would like one of this revo's , I was honored that they thought of me . So I'm going to buy his 929 which has the nub on it The one from Revo Supply was the one I saw a picture of but couldn't find it on they're website Thanks for the info. Link to comment Share on other sites More sharing options...
missed it by that much Posted April 18, 2021 Share Posted April 18, 2021 16 hours ago, ysrracer said: Did it have any effect on muzzle flip? Because the factory one is useless. Not really Link to comment Share on other sites More sharing options...
alecmc Posted April 18, 2021 Share Posted April 18, 2021 Dave Parker ( revo gear ) in MA used to make one for the 38 super guns that was pretty cool , probably would work on the 9mm guns too. 10mmdave on the fourms, not sure if he is still making them. https://forums.brianenos.com/profile/3-10mmdave/ Link to comment Share on other sites More sharing options...
PatJones Posted April 18, 2021 Share Posted April 18, 2021 Don't popple holes offer a bit more muzzle flip reduction? Link to comment Share on other sites More sharing options...
10mmdave Posted April 18, 2021 Share Posted April 18, 2021 (edited) <<< Man, I don't what I'm doing wrong but lets try this reply thing again !! >> Yes I'm still making the 929 and 627 Vcomp, George of Revolver Supply is carrying them or you can buy direct from me, pm me for more info. The 929 version. Edited April 18, 2021 by 10mmdave Link to comment Share on other sites More sharing options...
pskys2 Posted April 18, 2021 Share Posted April 18, 2021 7 hours ago, jcc7x7 said: I've got ANOTHER one coming. I was friends with the RO that got killed at the uspsa match last year. His family reached out and asked if I would like one of this revo's , I was honored that they thought of me . So I'm going to buy his 929 which has the nub on it The one from Revo Supply was the one I saw a picture of but couldn't find it on they're website Thanks for the info. Such sad reason to pick up a gun. Hopefully it will make the family feel a bit better. As far as a Comp on a Revolver, Hey the Cool Factor is worth it if you have somewhere to play with it at! Link to comment Share on other sites More sharing options...
10mmdave Posted April 18, 2021 Share Posted April 18, 2021 (edited) Here's a link to some more pic's and info. https://www.facebook.com/groups/117860108562820 I thought there was a thread here on BE Revo showing more info about comps but I'll be danged if I can't find it Edited April 18, 2021 by 10mmdave Link to comment Share on other sites More sharing options...
jcc7x7 Posted April 19, 2021 Author Share Posted April 19, 2021 (edited) George from Revo supply reached out to me and I have the info. It's a three port comp that he's handling. For whatever reason the page wasn't opening the other day on my lap top. RSC-929-COMP Thanks for your condolences to the family! Edited April 19, 2021 by jcc7x7 Link to comment Share on other sites More sharing options...
ysrracer Posted April 19, 2021 Share Posted April 19, 2021 So a gun with a goofy looking long barrel will be even longer and more goofier? Is goofier even a word? Link to comment Share on other sites More sharing options...
jcc7x7 Posted April 19, 2021 Author Share Posted April 19, 2021 Shucks golly and I made master with a goofy long barreled gun. What should I do now; I know get a longer barreled goofier gun, maybe I can make GM with it!!! Link to comment Share on other sites More sharing options...
ysrracer Posted April 19, 2021 Share Posted April 19, 2021 2 minutes ago, jcc7x7 said: Shucks golly and I made master with a goofy long barreled gun. What should I do now; I know get a longer barreled goofier gun, maybe I can make GM with it!!! So you're saying goffier is a word? Sweet Link to comment Share on other sites More sharing options...
jcc7x7 Posted April 19, 2021 Author Share Posted April 19, 2021 On 4/18/2021 at 12:58 PM, alecmc said: Dave Parker ( revo gear ) in MA used to make one for the 38 super guns that was pretty cool , probably would work on the 9mm guns too. 10mmdave on the fourms, not sure if he is still making them. https://forums.brianenos.com/profile/3-10mmdave/ On 4/18/2021 at 2:31 PM, 10mmdave said: <<< Man, I don't what I'm doing wrong but lets try this reply thing again !! >> Yes I'm still making the 929 and 627 Vcomp, George of Revolver Supply is carrying them or you can buy direct from me, pm me for more info. The 929 version. thanks for the help in finding this guys, appreciate it! Link to comment Share on other sites More sharing options...
MWP Posted April 20, 2021 Share Posted April 20, 2021 On 4/17/2021 at 6:56 PM, ysrracer said: Does a 9mm loaded to minor make enough pressure to work a comp? Maybe a 90gr bullet going 1400fps? Yes, they do work. Depends on the Comp and the load. I shoot a traditional heavy bullet/ fast powder and it still makes a difference. Now will it affect where you finish in a match? If you think it does, then yes. If you don’t think it does, then no. Link to comment Share on other sites More sharing options...
pskys2 Posted April 20, 2021 Share Posted April 20, 2021 11 hours ago, MWP said: Yes, they do work. Depends on the Comp and the load. I shoot a traditional heavy bullet/ fast powder and it still makes a difference. Now will it affect where you finish in a match? If you think it does, then yes. If you don’t think it does, then no. And I love gadgets! Struggle with the Dots, always have, but can see where they can make a difference. The biggest one is the older my eyes get, the rest of the body is actually doing better than it was 10 years ago or at least I'm a thinking it is?, the more I can see where it would help. If I just work at it. Speaking of working at it, hope you're ready for the Nationals! Good Luck! If you see my bud Joe Sutton there tell him I don't think any oil got on those primers I traded him! I got a chance to shoot his 929 at a charity match last weekend and I really liked that 6.5" barrel and his loads, the FS tracked great! Now I'm having gear envy again! Planning on returning to the Revolver Nationals in '22, as a Super Senior no less! Really love that thrill of competing against the best. Can't seem to learn anything watching the big dogs but it's a rush! Link to comment Share on other sites More sharing options...
MWP Posted April 21, 2021 Share Posted April 21, 2021 10 hours ago, pskys2 said: And I love gadgets! Struggle with the Dots, always have, but can see where they can make a difference. The biggest one is the older my eyes get, the rest of the body is actually doing better than it was 10 years ago or at least I'm a thinking it is?, the more I can see where it would help. If I just work at it. Speaking of working at it, hope you're ready for the Nationals! Good Luck! If you see my bud Joe Sutton there tell him I don't think any oil got on those primers I traded him! I got a chance to shoot his 929 at a charity match last weekend and I really liked that 6.5" barrel and his loads, the FS tracked great! Now I'm having gear envy again! Planning on returning to the Revolver Nationals in '22, as a Super Senior no less! Really love that thrill of competing against the best. Can't seem to learn anything watching the big dogs but it's a rush! Come on down. It’s a small pool, but the waters fine. Link to comment Share on other sites More sharing options...
missed it by that much Posted May 10, 2021 Share Posted May 10, 2021 Thought I'd post pics of that comp I had doug make since I had the revolver out Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now