mxj23 Posted January 4, 2021 Share Posted January 4, 2021 57 minutes ago, Bdh821 said: RB5020SS buffer system A5 buffer tube Next parts on the wishlist Link to comment
mxj23 Posted January 4, 2021 Share Posted January 4, 2021 1 hour ago, Bdh821 said: RB5020SS buffer system A5 buffer tube Next parts on the wish list Link to comment
jnr88 Posted January 4, 2021 Share Posted January 4, 2021 Luckily my Gen 2 has been perfect. I use a Hiperfire Eclipse and Isler handguard. Odin safeties and Raptor charging Hanley. These upgraded parts do not affect reliability. The JP owners I know have also upgraded their guns substantially. The competition is between you and the clock. I think MPX gives me my best chance to succeed. Link to comment
ARBilly Posted January 10, 2021 Share Posted January 10, 2021 Spikes Glock upper and lower. Faxon 14.5" barrel and BCG. CMMG firing pin. CMC trigger with KNS non rotating pins. Blitzkrieg hydraulic buffer system. BCM handguard. 6.25 lbs. with sight installed. Link to comment
bigdawgbeav Posted January 13, 2021 Share Posted January 13, 2021 #tandemized PC Carbine Link to comment
RexKramer Posted January 21, 2021 Share Posted January 21, 2021 On 1/17/2021 at 2:57 PM, rovpilot337 said: Sweet baby jesus that's a slick setup. Link to comment
mellino19 Posted February 12, 2021 Share Posted February 12, 2021 Both of my PCCs are franken-builds my original primary has become my back up - luckily I've tuned them so both run damn near identical given the different barrel lengths. Ideally a backup will match the primary but oh well. Current Primary PCC: Gibbz ambi lower (thanks to @Bdh821 bailing on his brekke build ) Brekke 10.5" Max Leograndis barrel with compXtension and smoke composites handguard combo setup ICRW Mohawk 3.0 Copperhead bolt Blitzkrieg 5020SS buffer with a 308 orange sprinco buffer spring in an A5 tube CMC 3.5lb PCC trigger Holosun 510c Backup/original PCC prior to Brekke build: New Frontier C9 Lower with a Titan Rocket Industries magwell 16" JP stainless barrel and JP stainless bolt with Venom Defense 9MM comp and a taccom feed ramp Iron City Rifle Works Berserker 13" handguard Holosun 510c (and a now removed Burris FastFire III offset) Blitzkrieg 5015HD buffer with weight spacer and JP rifle length 308 spring CMC 3.5lb PCC trigger Link to comment
ARBilly Posted February 12, 2021 Share Posted February 12, 2021 4 hours ago, mellino19 said: Both of my PCCs are franken-builds my original primary has become my back up - luckily I've tuned them so both run damn near identical given the different barrel lengths. Ideally a backup will match the primary but oh well. Current Primary PCC: Gibbz ambi lower (thanks to @Bdh821 bailing on his brekke build ) Brekke 10.5" Max Leograndis barrel with compXtension and smoke composites handguard combo setup ICRW Mohawk 3.0 Copperhead bolt Blitzkrieg 5020SS buffer with a 308 orange sprinco buffer spring in an A5 tube CMC 3.5lb PCC trigger Holosun 510c Backup/original PCC prior to Brekke build: New Frontier C9 Lower with a Titan Rocket Industries magwell 16" JP stainless barrel and JP stainless bolt with Venom Defense 9MM comp and a taccom feed ramp Iron City Rifle Works Berserker 13" handguard Holosun 510c (and a now removed Burris FastFire III offset) Blitzkrieg 5015HD buffer with weight spacer and JP rifle length 308 spring CMC 3.5lb PCC trigger Nice! How do you like your Mohawk red Bolts? They seem to be some of the best. Link to comment
Bdh821 Posted February 12, 2021 Share Posted February 12, 2021 1 hour ago, ARBilly said: Nice! How do you like your Mohawk red Bolts? They seem to be some of the best. I’ll sell you one that was supposed to be on my build... but I’ve shot his primary gun obviously. It’s a great setup. I’d def consider switching from a MPX if I wasn’t so deep into MPX world. Less s#!t to clean... less moving parts. Link to comment
ARBilly Posted February 13, 2021 Share Posted February 13, 2021 18 hours ago, Bdh821 said: I’ll sell you one that was supposed to be on my build... but I’ve shot his primary gun obviously. It’s a great setup. I’d def consider switching from a MPX if I wasn’t so deep into MPX world. Less s#!t to clean... less moving parts. Shoot me a PM. Link to comment
mellino19 Posted February 14, 2021 Share Posted February 14, 2021 On 2/12/2021 at 1:20 PM, ARBilly said: Nice! How do you like your Mohawk red Bolts? They seem to be some of the best. I’ve had zero problems with it and coating IRCW uses makes it a breeze to clean. I give a few sprays with breakthrough clean, wipe with a rag, good as new Link to comment
Nijman Posted March 14, 2021 Share Posted March 14, 2021 Here's my new ADC. Haven't shot it yet unfortunately because all ranges are closed. Covid.... Link to comment
Fasthenk65 Posted March 16, 2021 Share Posted March 16, 2021 On 3/14/2021 at 9:31 PM, Nijman said: Here's my new ADC. Haven't shot it yet unfortunately because all ranges are closed. Covid.... mooi werk van Patrick Link to comment
cityofthesouth Posted April 26, 2021 Share Posted April 26, 2021 Foxtrot 16" lightweight barrel, KVP bolt, TACCOM buffer, POF trigger, wasteland rattle can paint job. Link to comment
texasdawg Posted April 30, 2021 Share Posted April 30, 2021 Gun has a 510 on it now, much preferred by me. Taccom 5.5" barrel, bolt, handguard, Circle 10 side charging upper, blitzkrieg buffer, and POF trigger. Link to comment
mellino19 Posted January 2, 2023 Share Posted January 2, 2023 1 hour ago, Kjrobbins24 said: Needs a JP barrel with vertical comp Link to comment
Kjrobbins24 Posted January 3, 2023 Share Posted January 3, 2023 2 hours ago, mellino19 said: Needs a JP barrel with vertical comp couldn’t agree more. Thank god I know a guy Link to comment
Seanzky Posted January 6, 2023 Share Posted January 6, 2023 My Plain Jane PCC for IDPA. It's a PSA I bought for dirt cheap during their Thanksgiving sale. Link to comment
EricJ Posted January 25, 2023 Share Posted January 25, 2023 I'll play - This is my newest build that is use in USPSA competition. It weights about 4.75 pounds and shoots dead flat with 125g BMB RN under 3 grains of A#2 at 1.10 OAL. Areo EPC9 (threaded) receiver set Taccom 9mm standard bolt MBX Adjustable Air Buffer system MBX 10.5 p&w barrel Smokes 10" CF rail Hiperfire Hipertouch Trigger Radian Raptor CH K2 XL Grip Sight was a Bushnell something or other model - it is now a Sig Romeo1 6 moa Techwell Magwell that fits wonderfully LRBHO removed because it's useless for competition Link to comment
works for ammo Posted May 7, 2023 Share Posted May 7, 2023 This my fm9 build. Billet lower and Guntec billet upper. JP 14.5" barrel and JP comp. Smoke composites furniture. Blitz buffer and JP 308 rifle spring, no space weight. Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now