Kamkaze Posted February 11, 2018 Author Share Posted February 11, 2018 3 hours ago, SCTaylor said: Harrumph! Thanks Kamkaze. I was just wanting to handle one in person. Patriot is just down the road from me and I want to check out the Stock 1 and new Lim Pro. Sent from my iPhone using Tapatalk I might be able to arrange for the IFG Texas sales rep to take it with him on his next trip down there. Link to comment Share on other sites More sharing options...
SCTaylor Posted February 11, 2018 Share Posted February 11, 2018 I might be able to arrange for the IFG Texas sales rep to take it with him on his next trip down there.That would be nice. I’m either buying a 3rd Stock 2 or will need 2 new USPSA guns and an IPSC gun. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
PatriotDefense Posted February 14, 2018 Share Posted February 14, 2018 On 2/11/2018 at 12:05 PM, Kamkaze said: I might be able to arrange for the IFG Texas sales rep to take it with him on his next trip down there. YES PLEASE! Link to comment Share on other sites More sharing options...
Kamkaze Posted February 23, 2018 Author Share Posted February 23, 2018 (edited) I was able to get it on a scale finally and here is the result. I believe that the weight req for idpa is 43 oz correct? Well this one weighed 1216 gram which by my calculations is 42.89 oz. so it is very close to the limit but still under. Edited February 23, 2018 by Kamkaze Link to comment Share on other sites More sharing options...
IHAVEGAS Posted February 23, 2018 Share Posted February 23, 2018 Thank you, good info! "43 ounces with the heaviest magazine inserted" Looks good to go (with stock grips & stock basepad and not real dirty) but I would probably try to find a lightened guide rod or lighter grips something. Link to comment Share on other sites More sharing options...
ElMateo487 Posted February 23, 2018 Share Posted February 23, 2018 Considering how much tangos variate, that is super close. Also is the finish fragile? I see some scratches. Sent from my iPhone using Tapatalk Pro Link to comment Share on other sites More sharing options...
Kamkaze Posted February 23, 2018 Author Share Posted February 23, 2018 1 hour ago, ElMateo487 said: Considering how much tangos variate, that is super close. Also is the finish fragile? I see some scratches. Sent from my iPhone using Tapatalk Pro I know Mateo said something about adding a lightened guiderod possibly to bring the weight down some. As for the finish it’s fine, this is the only one in the country and has been to several shows to include SHOT, the number of people that have had their hands on it and set it on tables etc is very high. Link to comment Share on other sites More sharing options...
ElMateo487 Posted February 23, 2018 Share Posted February 23, 2018 I know Mateo said something about adding a lightened guiderod possibly to bring the weight down some. As for the finish it’s fine, this is the only one in the country and has been to several shows to include SHOT, the number of people that have had their hands on it and set it on tables etc is very high. Good to hear about the finish Link to comment Share on other sites More sharing options...
PatriotDefense Posted February 23, 2018 Share Posted February 23, 2018 51 minutes ago, Kamkaze said: I know Mateo said something about adding a lightened guiderod possibly to bring the weight down some. As for the finish it’s fine, this is the only one in the country and has been to several shows to include SHOT, the number of people that have had their hands on it and set it on tables etc is very high. Wander where that idea came from ? Link to comment Share on other sites More sharing options...
zombywoof Posted February 23, 2018 Share Posted February 23, 2018 I want one Link to comment Share on other sites More sharing options...
Dazhi Posted April 11, 2018 Share Posted April 11, 2018 Does anyone know the timeframe when the new LP will be available in the US? Also, will I be able to use the internals (sear assembly, trigger assembly, hammer) from large frame Stock 2 in the new small frame LP? Link to comment Share on other sites More sharing options...
johnbu Posted April 11, 2018 Share Posted April 11, 2018 2 hours ago, Dazhi said: Does anyone know the timeframe when the new LP will be available in the US? Also, will I be able to use the internals (sear assembly, trigger assembly, hammer) from large frame Stocrk 2 in the new small frame LP? I seem to recall hearing that guns should be available in late spring / early summer. Not sure, but "not soon enough" ! Also, no experience with small frames, but I strongly believe that the triggers, hammers, sear assemblies ARE interchangeable. The mags, grips, trigger bar and firing pin ARE NOT interchangeable. Link to comment Share on other sites More sharing options...
OPENB Posted June 27, 2018 Share Posted June 27, 2018 Any word if these are available yet? Late spring has passed, summer's here... Link to comment Share on other sites More sharing options...
IHAVEGAS Posted July 11, 2018 Share Posted July 11, 2018 " Stock I has a cylindric barrel,113 mm long, that can get excellent results also using coated tender ammunition bullets." Can anybody out there translate Tanfo add type to English? I'm assuming both the Stock 1's and limited pros will be traditional button rifled barrels? Not sure why they would feel a need to mention coated bullets, some Tanfo's can't shoot coated lead like bayou & sns & etc. ? Link to comment Share on other sites More sharing options...
MemphisMechanic Posted July 11, 2018 Share Posted July 11, 2018 At least we know frames exist... Link to comment Share on other sites More sharing options...
bulm540 Posted July 11, 2018 Share Posted July 11, 2018 1 hour ago, MemphisMechanic said: At least we know frames exist... Large frame? Link to comment Share on other sites More sharing options...
johnbu Posted July 12, 2018 Share Posted July 12, 2018 14 hours ago, bulm540 said: Large frame? looks small from the grip screw hole location. On 7/11/2018 at 7:50 AM, IHAVEGAS said: " Stock I has a cylindric barrel,113 mm long, that can get excellent results also using coated tender ammunition bullets." Can anybody out there translate Tanfo add type to English? I'm assuming both the Stock 1's and limited pros will be traditional button rifled barrels? Not sure why they would feel a need to mention coated bullets, some Tanfo's can't shoot coated lead like bayou & sns & etc. ? translation: Straight barrel, normal rifling, use any bullet you want. Some guns (glock?) with polyangle rifling say to not use lead or coated. I've shot lots (30k?) coated out of stock2 with polyangle rifling. Tanfo doesn't try to limit ammo choices. Link to comment Share on other sites More sharing options...
IHAVEGAS Posted July 12, 2018 Share Posted July 12, 2018 1 hour ago, johnbu said: translation: Straight barrel, normal rifling, use any bullet you want. Some guns (glock?) with polyangle rifling say to not use lead or coated. I've shot lots (30k?) coated out of stock2 with polyangle rifling. Tanfo doesn't try to limit ammo choices. Thorough and clear. Thank you!! Link to comment Share on other sites More sharing options...
johnbu Posted July 13, 2018 Share Posted July 13, 2018 On 7/11/2018 at 9:36 AM, MemphisMechanic said: At least we know frames exist... Will the model "Defiant" be uspsa production legal? Link to comment Share on other sites More sharing options...
Dazhi Posted August 9, 2018 Share Posted August 9, 2018 Any update on pre-order dates? Link to comment Share on other sites More sharing options...
Brophy-J Posted September 13, 2018 Share Posted September 13, 2018 I would be interested in one of these. The picture above, is that chromed or just raw and not coated yet? I would prefer chrome honestly but not a big deal. What kind of aftermarket grips are available for small frames? I cant seem to find any. Did Patriot Defense ever get some of them or are they still waiting? Thanks for the info. Link to comment Share on other sites More sharing options...
haiedras Posted September 14, 2018 Share Posted September 14, 2018 On 4/11/2018 at 10:16 AM, johnbu said: Also, no experience with small frames, but I strongly believe that the triggers, hammers, sear assemblies ARE interchangeable. The mags, grips, trigger bar and firing pin ARE NOT interchangeable. Correct on the trigger bar and the FP. At least as far as the Stock 2 is concerned, the slide and barrel were also not interchangeable. Link to comment Share on other sites More sharing options...
IHAVEGAS Posted September 22, 2018 Share Posted September 22, 2018 (edited) Italian Firearms Group Excellent work. New toys inbound in the next month or so. Stay tuned..... Saw this on a facebook feed from Patriot Defense just now, was below a picture of a stock 1 but perhaps refers to LP's also or instead of. Edited September 22, 2018 by IHAVEGAS Link to comment Share on other sites More sharing options...
gunner01 Posted November 12, 2018 Share Posted November 12, 2018 Just got word from IFG that the new Lim Pros will be available from them in both small frame and large frame and should be available in December. Link to comment Share on other sites More sharing options...
gunner01 Posted November 12, 2018 Share Posted November 12, 2018 (edited) Also, I was confused as to whether the new Lim Pros were going to be black or hard chrome from the different pictures on the web. IFG indicated that the sample they had imported was black but that the production guns will be hard chrome. Edited November 12, 2018 by gunner01 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now