Jump to content
Brian Enos's Forums... Maku mozo!

zombywoof

Classifieds
  • Posts

    849
  • Joined

  • Last visited

Everything posted by zombywoof

  1. A single stage press will make ammunition. If you want to make ammo in quantity easier and faster, the cost goes up. What is your time worth. I went from a single stage to a Loadmaster to a 650. The amount of ammo I started going through shooting USPSA I needed a 650.
  2. My load for my M&P compact 125 gr coated bullet is 3.1 grains WST. Comes in at 108 PF. Super soft.
  3. My bullet pulled at chrono. I was confused at why my PF was 125.1, it should have been much higher until I got home and inspected the bullet. It was several grains shy of its weight. Chrono guy says relax you made it by a mile.
  4. The Stock 2 is supported extremely well. It's the best DA/SA gun out there
  5. I would not rule out a Stock 2. Not as nose heavy as a Shadow2.
  6. take the left side grip off and make sure the right side grip is sitting in the cavity correctly.
  7. Shot a match that had about a foot of rain before and during the first day. I bought a pair of soccer cleats they worked very well while others were slipping. I haven't used them since. Trail running shoes have work well other than that day.
  8. So is the hammer problem solved? Was the sear installed incorrectly? Did you removed the firing pin and install it incorrectly?
  9. I've seen many people go in and out of the sport. I agree with stop dry firing and just go shoot. The two hour drive sucks though.
  10. If it's the .040" moonclips, I've been waiting since February. I talked to George a few weeks ago. He said he is waiting for the material to be rolled to .040".
  11. I have one in my small frame Tanfo and all my large frames. I've never broken a TRS on the six Tanfos I've own. Although it seems a bad batch of TRS springs were made
  12. I have the Patriot Defense brass aggressive palm swell. They are nice.
  13. I also have several Tanfos. I bought an used Eric model open gun as a back up to my 2011. After while the 2011 was just a better gun.
  14. Had the same problem. While working on a friends Tanfo, he ordered new springs. The trigger return spring failed. I replaced it with an older one from my stock and it's been fine. I think there was a bad batch of springs.
  15. I'm testing out the welding spray now. I shoot my cast, coated bullets through my open gun. The comp gets a coating of lead. The spray has helped remove the lead much easier.
  16. I had an RTS2 lens crack on a new open gun during initial sight in, less than 30 rounds. I chalk it up to manufacturing defect. The replacement has lasted for years.
×
×
  • Create New...