drivenagain Posted October 8, 2017 Share Posted October 8, 2017 I shot a buddies STI DVC 3-Gun at a local match, and it was hands down the most amazing pistol I've ever fired. It runs flawlessly with no issues shooting factory 124gr 9mm I have since been researching the purchase of an STI Edge to replace my Glock 17. I have seen some reports of issues with stock STI's out of the box, some saying that their quality control isnt what it used to be. But I know some guys who say they are perfect out of the box, so I'm getting some conflicting info and hoping you guys could help. Ive finally found an amazing shooting platform, just not sure if I need a Brazos/Titan/CK to be safe. Thanks! Jason Link to comment Share on other sites More sharing options...
WhoIsPat9 Posted October 8, 2017 Share Posted October 8, 2017 It really depends on your budget. I skipped the DVC and went to a CK as they were give or take $100 difference at the time. If you've got the extra coin, I wouldn't hesitate to talk to Adam at Atlas at all. Link to comment Share on other sites More sharing options...
sauza45 Posted October 8, 2017 Share Posted October 8, 2017 Look at the Brazos high performance edge. http://brazoscustom.com/Home.htm Link to comment Share on other sites More sharing options...
Steppenwolf Posted October 8, 2017 Share Posted October 8, 2017 You can get a stock STI Edge and always have it "tuned." My stock Edge (.40) had a couple of failure to go completely into battery during the first 500 rounds using off-the-shelf ammo (MagTech, Fiocchi, Federal), but that could have been the magazine or just a "break-in" issue. Just tapping the rear of the slide seated the rounds. Other than that, no issues. The custom guns are much more expensive. Atlas pistols have increased in price. You can find a stock STI Edge for $2000 less than a custom Limited gat. I went with stock because if I decided Limited major was not to my liking I could always sell the gun for minor loss. Jumping into a more expensive pistol and more expensive magazines (MBX, etc.) is something that you can always do later. Start at the base. Next step would be gunsmith tuning. Next step would be sell/trade for a custom pistol. I've seen a lot of local people buy DVCs or custom guns and have some issues or they quickly soured on the guns because they did not go from C Class to Master immediately. I shoot better than several people with "custom guns." Link to comment Share on other sites More sharing options...
drivenagain Posted October 8, 2017 Author Share Posted October 8, 2017 53 minutes ago, Steppenwolf said: You can get a stock STI Edge and always have it "tuned." My stock Edge (.40) had a couple of failure to go completely into battery during the first 500 rounds using off-the-shelf ammo (MagTech, Fiocchi, Federal), but that could have been the magazine or just a "break-in" issue. Just tapping the rear of the slide seated the rounds. Other than that, no issues. The custom guns are much more expensive. Atlas pistols have increased in price. You can find a stock STI Edge for $2000 less than a custom Limited gat. I went with stock because if I decided Limited major was not to my liking I could always sell the gun for minor loss. Jumping into a more expensive pistol and more expensive magazines (MBX, etc.) is something that you can always do later. Start at the base. Next step would be gunsmith tuning. Next step would be sell/trade for a custom pistol. I've seen a lot of local people buy DVCs or custom guns and have some issues or they quickly soured on the guns because they did not go from C Class to Master immediately. I shoot better than several people with "custom guns." Thanks!! This is what I was looking to hear, I'm looking at a used Edge this week with 1500 rds thru it. Link to comment Share on other sites More sharing options...
Bigzeke Posted October 8, 2017 Share Posted October 8, 2017 I started in the 2011 game with a used Edge. I have had zero issues with it. Several friends have bought brand new ones. Some needed minor tuning (extractors, slide stops), others ran like a top from day one. If you are just testing the waters, hard to go wrong with a used one from here. Just my personal experience. Link to comment Share on other sites More sharing options...
wgj3 Posted October 8, 2017 Share Posted October 8, 2017 Agree that a used gun is the way to start. In fact, of the 7 2011's I have owned, none were purchased new. Link to comment Share on other sites More sharing options...
rowdyb Posted October 8, 2017 Share Posted October 8, 2017 I have an Atlas Titan and love it. But if I'd only had 2k and wanted a new gun I wouldn't hesitate at all to get the Brazos tuned one. If you were pretty familiar with the 2011 platform and could accurately assess and work on one, then I also wouldn't hesitate to get a used one. Link to comment Share on other sites More sharing options...
drivenagain Posted October 9, 2017 Author Share Posted October 9, 2017 I have my on a used Edge with low round count and zero issues. Thanks for the feedback guys Link to comment Share on other sites More sharing options...
Water63 Posted October 10, 2017 Share Posted October 10, 2017 I bought a used 40 cal Edge it runs great no issues. I really like it I can run major or download some and run minor. Ran 5000 through it this season no signs of wear. I just had a smith look at it when he put a *thumb rest [generic]* on for me no issues. Great solid guns. Link to comment Share on other sites More sharing options...
drivenagain Posted October 11, 2017 Author Share Posted October 11, 2017 12 hours ago, Water63 said: I bought a used 40 cal Edge it runs great no issues. I really like it I can run major or download some and run minor. Ran 5000 through it this season no signs of wear. I just had a smith look at it when he put a *thumb rest [generic]* on for me no issues. Great solid guns. great feedback thanks!!! Link to comment Share on other sites More sharing options...
tanks Posted October 13, 2017 Share Posted October 13, 2017 I bought an Edge last year to be my primary while waiting for my SVI, it is my backup now. After 20K or so rounds through it the only thing I had to replace was a broken extractor (other than recoil springs). I did have a trigger job (EGW parts), pinned grip safety (Ed Brown part) and also replaced the grip with SVI grip (to be compatible with my SVI holster insert). I'd say at minimum do a trigger job anything else is personal preference. Link to comment Share on other sites More sharing options...
drivenagain Posted October 14, 2017 Author Share Posted October 14, 2017 2 hours ago, tanks said: I bought an Edge last year to be my primary while waiting for my SVI, it is my backup now. After 20K or so rounds through it the only thing I had to replace was a broken extractor (other than recoil springs). I did have a trigger job (EGW parts), pinned grip safety (Ed Brown part) and also replaced the grip with SVI grip (to be compatible with my SVI holster insert). I'd say at minimum do a trigger job anything else is personal preference. Im about to move my Glock 17 CO gun to fund this move, this news is great to hear. Looking forward to a heavy gun and going back to iron sights Link to comment Share on other sites More sharing options...
enzo357 Posted October 16, 2017 Share Posted October 16, 2017 Couple of my friends have bought the Dawson Precision Competition Ready Edge. They seem real happy with it. When they decide to go custom, they will have a great backup. Link to comment Share on other sites More sharing options...
davsco Posted October 16, 2017 Share Posted October 16, 2017 odds are you'll be completely happy with a stock edge. but for a couple hundred more you can get brazos hp edge where they do some reliability work and trigger job. i have and love mine. but also have some factory sti's that i love, but have dropped in the brazos trigger groups on each. Link to comment Share on other sites More sharing options...
Descartian Posted October 16, 2017 Share Posted October 16, 2017 On 10/8/2017 at 9:55 AM, sauza45 said: Look at the Brazos high performance edge. http://brazoscustom.com/Home.htm I have one of Bob's HP Edges. They're great pistols and Bob's trigger work is amazing! For the work he does plus the hard chroming it's not a bad deal. Link to comment Share on other sites More sharing options...
drivenagain Posted October 17, 2017 Author Share Posted October 17, 2017 Thanks guys...I have my eye on a used Edge, should close the deal this week hopefully. Sub 1500 rds sounds like a low count to me. Once I get her, fingers crossed, I will report back then see about tuning. Link to comment Share on other sites More sharing options...
Zulu77 Posted October 19, 2017 Share Posted October 19, 2017 I have a brand new STI Edge in 40 caliber. I have not run more than 300 rounds through it as yet. Had to polish the ramp as well as tune the magazines a bit to make it more reliable but all seems well now. Looking to change the recoilmaster springs soon. Link to comment Share on other sites More sharing options...
drivenagain Posted October 19, 2017 Author Share Posted October 19, 2017 21 hours ago, Zulu77 said: I have a brand new STI Edge in 40 caliber. I have not run more than 300 rounds through it as yet. Had to polish the ramp as well as tune the magazines a bit to make it more reliable but all seems well now. Looking to change the recoilmaster springs soon. failure to feed issues? Link to comment Share on other sites More sharing options...
lppd4 Posted October 20, 2017 Share Posted October 20, 2017 I bought a brand new edge in 2000. Had feeding issues, I took it to a local guy and he lowered the barrel into the frame and that gun ran with anything I put in it. I also had other work done to it. Blended the beavertail better, serrated the rear of the slide at 40 LPI, new hammer and the trigger lightened up, STI magwell and a hard chrome job. That gun shot way better than I could. I'm sure it was capable of a national championship if I could do my part. Sold it about 2 years ago and bought a basically new ground up build on an SV frame from a friend. The guy I sold it too has had 0 issues with it. STI makes great guns and their customer service is also great. Link to comment Share on other sites More sharing options...
Descartian Posted October 21, 2017 Share Posted October 21, 2017 5 hours ago, lppd4 said: STI makes great guns and their customer service is also great. So true. I'm a big fan. Link to comment Share on other sites More sharing options...
Banacek Posted October 21, 2017 Share Posted October 21, 2017 On 10/8/2017 at 8:17 AM, drivenagain said: I shot a buddies STI DVC 3-Gun at a local match, and it was hands down the most amazing pistol I've ever fired. It runs flawlessly with no issues shooting factory 124gr 9mm I have since been researching the purchase of an STI Edge to replace my Glock 17. I have seen some reports of issues with stock STI's out of the box, some saying that their quality control isnt what it used to be. But I know some guys who say they are perfect out of the box, so I'm getting some conflicting info and hoping you guys could help. Ive finally found an amazing shooting platform, just not sure if I need a Brazos/Titan/CK to be safe. Thanks! Jason I really like the STI 9mm DVC, I tried someone's as well but I was not going to spend that much for a 3 gun firearm so I bought G34 and had it tuned. If you have the budget, go with a standard STI and check it out before getting it tuned. Link to comment Share on other sites More sharing options...
blasterboy Posted October 22, 2017 Share Posted October 22, 2017 I bought a stock Edge in 40 a few years back. Had feeding issues with factory ammo. Got my press's conversion kit and started loading my own (long - 1.180") tweaked the mag lips a bit to give the bullets a slight "nose up" and polished the feed ramp with 600 grit sandpaper. I think I fired around 5000 rounds before having 1 malfunction. I installed a C&S warp speed drop in trigger kit, it felt a bit better; better option would have been a trigger job by a good gunsmith but there aren't many around where I live. I've fired over 7500 rounds not and love it. Link to comment Share on other sites More sharing options...
Zulu77 Posted October 25, 2017 Share Posted October 25, 2017 On 10/19/2017 at 7:22 PM, drivenagain said: failure to feed issues? Yes.....The armorer sorted it out within minutes. Link to comment Share on other sites More sharing options...
TANFARM Posted October 26, 2017 Share Posted October 26, 2017 Whatever it’s worth...I have 2 of DAVE Dawson’s 9 mm Edges....he was still doing trigger work then...now it’s add on parts..I get it. Very happy with the pistols and great service as well! if I were do order another I would definitely go with Brazos.......or get an Atlas Titan and be done with it....lol....... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now