shaun1826 Posted May 20, 2016 Share Posted May 20, 2016 (edited) I have all my parts on order for my 3 gun build and have narrowed my handguard selection down to the following options. I wear large size gloves to give you an idea of hand size. I really like the SLR Helix, but am concerned about it having to many holes and possible sharp edges my fingers might get into. Is it very easy to get your fingers stuck into any of these or any that are discomfortable to use? If you have another handguard recommendation please feel free to. This will be used on a 16 inch barrel with SLR - 7 clamp on gas block. Thanks! SLR Ion Ultralite Mlok 13.7 inch - 10.3 oz - 1.35 ID SLR Helix Mlok 13.7 inch - 7.9 oz - 1.35 ID SLR Solo Ultralite Mlok 13.7 inch - 9.7 oz - 1.30 ID Noveske NSR Keymod 13.5 inch - 11.0 oz - 1.35 ID BCM KMR 13 inch keymod - 7.7 oz - 1.30 ID Edited May 21, 2016 by shaun1826 Link to comment Share on other sites More sharing options...
Steve O'Connell Posted May 20, 2016 Share Posted May 20, 2016 (edited) No expert here but be careful that your handguard lives up to its name and does not allow your fingers to come in contact with the barrel or gas block in the "heat of battle/competition". Also, be sure your chosen length goes out as far as possible to provide safe grabbing locations and flexibility against barricades. Looks like you are using a 16" barrel? I have an SLR on an AR pistol and it is great. My 3-gun and home defense ARs have Fortis handguards. After taking a 3-gun class I realized there were some holes in the guard that might let my fingers come in contact with the gas block. FWIW. Edited May 20, 2016 by Steve O'Connell Link to comment Share on other sites More sharing options...
dauntedfuture Posted May 20, 2016 Share Posted May 20, 2016 Im a big fan of the new G3 MI lightweight models. The mounting system works well and there is no indexing required. Link to comment Share on other sites More sharing options...
antiochkeith Posted May 21, 2016 Share Posted May 21, 2016 I just installed a BCM KMR A13 handguard with a SLR Sentry 7 gas block. SLR recommended to use the pinned block for full clearance with the KMR. The combination is working very well. Link to comment Share on other sites More sharing options...
Garmil Posted May 21, 2016 Share Posted May 21, 2016 Really like my 15" Midwest lightweight keymod 9.2 oz 1.5 od And not having the full top rail gives a much nicer grip on my opinion Link to comment Share on other sites More sharing options...
nheiny13 Posted May 21, 2016 Share Posted May 21, 2016 I really like the F1 Miculek handguard. It's lightweight, sturdy, very slim, and no top rail. I couldn't ask for anything else in a handguard Link to comment Share on other sites More sharing options...
jswhitesell619 Posted May 21, 2016 Share Posted May 21, 2016 I just built an 18" upper and ended up going with a 15" alpha series kmr. I have been very very happy with it! I have similar sized hands and have not found it to be too small or wanting anything larger. All in all I have been satisfied and am looking at another kmr for my upcoming pcc build Link to comment Share on other sites More sharing options...
1time Posted May 21, 2016 Share Posted May 21, 2016 Another vote for the MI lightweight. They make it in mlok or keymod. Link to comment Share on other sites More sharing options...
bwikel Posted May 21, 2016 Share Posted May 21, 2016 (edited) You may want to consider a gas block with set screws. The clamp on block will end up contacting the inside of a rail with a small ID. I had it happen with a NSR every time I shot from a barricade and pushed into the rifle. Edited May 21, 2016 by bwikel Link to comment Share on other sites More sharing options...
shaun1826 Posted May 21, 2016 Author Share Posted May 21, 2016 (edited) You may want to consider a gas block with set screws. The clamp on block will end up contacting the inside of a rail with a small ID. I had it happen with a NSR every time I shot from a barricade and pushed into the rifle. The barrel I'm using is as Stretch 16 cerakoted barrel. A clamp on gas block is a must with this barrel without scratching it all up. I've looked at the MI lightweight hanguards, but they don't make a 13-13.5 inch option that I'm aware of. I think the 15 inch is a little long for a 16 inch barrel and the 12 inch version is a little to short. Edited May 21, 2016 by shaun1826 Link to comment Share on other sites More sharing options...
IntenseImage Posted May 21, 2016 Share Posted May 21, 2016 Definitely go 15 on the handguard. If I didn't have this F1 M7M I'd be using the Helix Link to comment Share on other sites More sharing options...
SubOrbital Posted May 22, 2016 Share Posted May 22, 2016 SLR makes 13.7" rails to cover low pro gas blocks. Use them on my rifle length gas system builds. The Helix feels appreciably lighter than the Ion in hand, but the Helix is a little more cheese grater from all the lightening cuts. Link to comment Share on other sites More sharing options...
MHitchcock Posted May 22, 2016 Share Posted May 22, 2016 Slightly heavier, but I'm a huge fan of JPs hand guards. But I'm willing to put up with a few extra ounces to have something that feels just right in hand. Link to comment Share on other sites More sharing options...
NoKimberDave Posted May 23, 2016 Share Posted May 23, 2016 Tried many hand guards and recently my favorite has become a 12" ALG m-lok. There are no rails and no top rail, which is perfect. I am thinking of sticking a 15" on my 16" rifle, which now has the MI ultralight M-lok rail. But the MI is nice as well. $110.00 and I have no idea how weight compares to anything else. It's on a 6lb gun and doesn't need to be lighter. Not going to impress the Speedcross crowd with it, unfortunately. Luckily, I am the kind of guy who feels rich with a fat wife, a roof over my head, and a $2000 truck! Link to comment Share on other sites More sharing options...
IntenseImage Posted May 23, 2016 Share Posted May 23, 2016 I am thinking of sticking a 15" on my 16" rifle, which now has the MI ultralight M-lok rail. Wifey likes hers Link to comment Share on other sites More sharing options...
flyfishdave Posted May 24, 2016 Share Posted May 24, 2016 SLR makes some great rails. Started with the Solo Ultralite 15" and 16.5" for my 16" and 18" uppers respectively. Recently swapped them out for the the 15" and 16" Helix b/c they just looked so fast! Even got a Helix for the Glock PCC built too! I'll probably sell the Ultralite hand guards, when I get around to it. 15" Solo Ultralite: 15" Helix: Untitled by Dave, on Flickr 16" Helix: Untitled b y Dave, on Flickr 6.7" Helix: Link to comment Share on other sites More sharing options...
cooper74 Posted May 27, 2016 Share Posted May 27, 2016 Trying out a Helix myself... SLR is having another 15% off sale right now. Link to comment Share on other sites More sharing options...
powerx4 Posted June 4, 2016 Share Posted June 4, 2016 Samson evolution or fortis rev 2 Link to comment Share on other sites More sharing options...
The Donald Posted June 18, 2016 Share Posted June 18, 2016 (edited) I good value handguard is the Midway AR Stoner, 15" is 10 oz. and the M-Loks are on sale for $129. Mount real rigid, something my Seekins didn't do due to using the Seekins adapter and not having a Seekins upper. (it is lighter and smaller dia. than the Seekins) It slipped over my SLR 7 gas block with room to spare. Edited June 18, 2016 by The Donald Link to comment Share on other sites More sharing options...
StarvinPilgrim Posted June 30, 2016 Share Posted June 30, 2016 I really like my Midwest Industries Gen 2 SS. Slim yet very rigid. Link to comment Share on other sites More sharing options...
TXMXRACER Posted July 1, 2016 Share Posted July 1, 2016 Another vote for JP enterprises. Very comfortable and sturdy. Link to comment Share on other sites More sharing options...
fishsticks Posted July 1, 2016 Share Posted July 1, 2016 SLR solo ultra lite here. Very nice, light Handguard. Not cheap though. Link to comment Share on other sites More sharing options...
1911vm Posted July 3, 2016 Share Posted July 3, 2016 (edited) I have all my parts on order for my 3 gun build and have narrowed my handguard selection down to the following options. I wear large size gloves to give you an idea of hand size. I really like the SLR Helix, but am concerned about it having to many holes and possible sharp edges my fingers might get into. Is it very easy to get your fingers stuck into any of these or any that are discomfortable to use? If you have another handguard recommendation please feel free to. This will be used on a 16 inch barrel with SLR - 7 clamp on gas block. Thanks! SLR Ion Ultralite Mlok 13.7 inch - 10.3 oz - 1.35 ID SLR Helix Mlok 13.7 inch - 7.9 oz - 1.35 ID SLR Solo Ultralite Mlok 13.7 inch - 9.7 oz - 1.30 ID Noveske NSR Keymod 13.5 inch - 11.0 oz - 1.35 ID BCM KMR 13 inch keymod - 7.7 oz - 1.30 ID I also looking to replace the forehand on my JP upper . Ireally like BCM but are the numbers above include the mounting nut? I think the BCM is around 3.5 oz Edited July 3, 2016 by 1911vm Link to comment Share on other sites More sharing options...
Vinogeek Posted July 3, 2016 Share Posted July 3, 2016 JP MKIII Rapid Config for me. Not the lightest but damn comfortable and looks cool. Link to comment Share on other sites More sharing options...
photoracer Posted July 6, 2016 Share Posted July 6, 2016 My 18" barreled 3-gun AR sports a 15" AP Custom CF handguard while my 16" LW 3-gun rifle has an 13.7" ALG. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now