Slotbike Posted February 1, 2016 Share Posted February 1, 2016 (edited) Ok, let me start by saying that, I bleed blue! I have 2-1050's a 650 a 550, 2- RF100's, a Super swage as well as every conceivable thing that Dillon makes. I have 2 RF100's. One set up for small primers and one set up for large primers! I spend more time trying to get 100 primers loaded than I do reloading. I can not get these things to load without primers flipping, primers getting stuck in the hole where they are supposed to drop down, getting hung up prior to entering the plastic crappy A or B cover plate. What a waste of time and money. I can hen peck the primers into the tubes faster than these vibrating garbage cans can load them. How does Dillon get away with selling these? Total disappointment! Edited February 1, 2016 by Slotbike Link to comment Share on other sites More sharing options...
Shadyscott999 Posted February 1, 2016 Share Posted February 1, 2016 Mine is 100% with CCi primers. Sucks balls with winchesters. Link to comment Share on other sites More sharing options...
ano Posted February 1, 2016 Share Posted February 1, 2016 I got 2x RF100 The small one will run anything but murom, I have at least 100.000+ winchester through it, and equal ammounts of federal, and S&B The large one runs fed all day, magtech will need a small budge every now and then to keep going, and S&B once adjust runs ok, will fail to load 2-3-4 primers on the 2 min cycle, but no biggie. so yes I love them. Mine are on either floor, or a wobbley table, or loading desk, they are NOT picky. Link to comment Share on other sites More sharing options...
technetium-99m Posted February 1, 2016 Share Posted February 1, 2016 Mine is one of the most epic reloading purchases ever. It is awesome. Link to comment Share on other sites More sharing options...
Sherwyn Posted February 1, 2016 Share Posted February 1, 2016 They are finicky, if you change primer brands. Usually the issue is moving things too far when trying to make adjustments. .005" change in position of the guides will make a difference. I usually use a caliper to measure position before I make any change. If you get really frustrated, I could use a second one Sherwyn Link to comment Share on other sites More sharing options...
Slotbike Posted February 1, 2016 Author Share Posted February 1, 2016 (edited) The trouble I am having is with the one set up for large primers. I am running Winchester Large Pistol Primers and it is horrible! My other one (small primer) runs CCI with little issues! Sherwyn, I may just have two mint almost new ones for sale, if this continues, lol! Edited February 1, 2016 by Slotbike Link to comment Share on other sites More sharing options...
armydad Posted February 1, 2016 Share Posted February 1, 2016 I think the older RF100 either did not have a rheostat or Dillon upgraded the rheostat. Here is a video from a guy who fine-tuned his. It had to do with the spring in the base of the unit. Link to comment Share on other sites More sharing options...
armydad Posted February 1, 2016 Share Posted February 1, 2016 I'm not sure about this tip but though I'd throw it out there. https://youtu.be/KwGQHlfCudE?t=292 Link to comment Share on other sites More sharing options...
Slotbike Posted February 1, 2016 Author Share Posted February 1, 2016 (edited) My RF100's are the new models, with the rheostats. I've seen socalpreppers video many times also. It may be the Winchester primers but the thing is driving me crazy. I load over 12 caliber's so when I load, I like to knock out 10,000 plus of a caliber at a time. If these RF's worked like they should, I would be loading instead of messing with the primer filler machine. I loaded 1000 rounds of .45 ACP today......if the primer fillers were working properly, I could have done 5000 today. Very unproductive day! Edited February 1, 2016 by Slotbike Link to comment Share on other sites More sharing options...
Slotbike Posted February 1, 2016 Author Share Posted February 1, 2016 (edited) Edited because I answered my own question.....still have issues with the RF100 for LPP. Edited February 1, 2016 by Slotbike Link to comment Share on other sites More sharing options...
armydad Posted February 1, 2016 Share Posted February 1, 2016 Hey Army dad, I watched the second link you posted (I've seen it a few times) but I picked up on something that I never thought of. He said: The "B" plate is for magnum primers because they are a little taller??????? (I didn't know that) I wonder if that is the issue with the Winchester primers........being a little taller. Maybe I should try the "B" plate? What do you guys think? Anyone use Winchester LPP's and not have any issues? it's worth a shot. I wish I knew more about primers. I'm new the to game and still figuring things out myself. Link to comment Share on other sites More sharing options...
Slotbike Posted February 1, 2016 Author Share Posted February 1, 2016 (edited) I have the "B" plate in it. The guy in the video is wrong. The "B" plate is for large primers and I have it correct. I did just mess with the screw under the top that holds the little plastic adapter in. It is supposed to float and I backed the screw out but it's still flipping primers. Edited February 1, 2016 by Slotbike Link to comment Share on other sites More sharing options...
Dr Mitch Posted February 1, 2016 Share Posted February 1, 2016 How many times have you called Dillon? Link to comment Share on other sites More sharing options...
blueeyedme Posted February 1, 2016 Share Posted February 1, 2016 Couple of not in the manual of tips that helped me when I was starting out...put your RF on a mousepad...stretch the spring on he bottom to put more upward pressure on the tube....and clean your tubes. In any event, very happy with mine. Have only run Winchester through it. Link to comment Share on other sites More sharing options...
slavex Posted February 1, 2016 Share Posted February 1, 2016 funny I prefer having less spring pressure on the tube on my RF100. I find that Federals do flip, 1 in 200 usually, CCI never, S&B never and even the Chinese Dominion primers don't flip, although they do get hung up now and then at the tube or even at the entrance to the plastic plate. But not enough to really annoy me. Link to comment Share on other sites More sharing options...
basman Posted February 1, 2016 Share Posted February 1, 2016 This easy fix solved my occasional flipping issues: Clean both the inside of the RF tube and the primer feed tube on the press. I do this by pushing a q-tip through with the primer rod from the press. Link to comment Share on other sites More sharing options...
RiggerJJ Posted February 1, 2016 Share Posted February 1, 2016 the RF is a great machine, unfortunately it can be a bear to get perfect. some of my hints... -adjust things in very small movements -the plastic A B guard adjustment is very important -the top platform should be level or leaning forward toward you slightly -move the rheostat to the point of barely moving the primers, then go faster in very small increments -try dumping the primers with the big clear plastic top in place then once they are all in the platform remove it -placing the RF on a mouse pad or Sierra Bullets placemat helps -buffering the tube housing from the screw head with something rubbery will help, keep the inner tube contacting the red/blue piece thou the notion that the RF is a piece of crap or a waste of money is wrong. it can be frustrating, but once it is set up and running it is a great time saver! No pecking at primer trays, no loading tubes with a vibrator, just dump a tray of primers in, turn it on, and go back to loading while it fills the tube automatically. Come back after loading 100 rounds and a new tube is ready to dump into the loader. NO time is spent loading tubes. jj Link to comment Share on other sites More sharing options...
Foxbat Posted February 1, 2016 Share Posted February 1, 2016 They all have their moments, and one is more reliable with Win, the other - with the silver-colored ones (ANY silver primers!), and the third one handles the large primers quite well. Maybe I am too philosophical a guy, but I don't cry over a couple of flips - I have a dedicated disassembly RCBS press right there, and I reuse all the components... it only takes seconds. Link to comment Share on other sites More sharing options...
benos Posted February 1, 2016 Share Posted February 1, 2016 Mine is one of the most epic reloading purchases ever. It is awesome. After getting one if the first 8 prototypes, I felt the same way. Link to comment Share on other sites More sharing options...
Tom S. Posted February 1, 2016 Share Posted February 1, 2016 One that works? Nope. I have two that work. Link to comment Share on other sites More sharing options...
slavex Posted February 2, 2016 Share Posted February 2, 2016 my issue with Federal primers is that they flip right as they fall in the tube of the RF or they flip when the first 20 or so drop into the tube from the RF tube when I pull the pin Link to comment Share on other sites More sharing options...
cecil Posted February 2, 2016 Share Posted February 2, 2016 my RF100 has worked well since I got it.. had to re-adjust the plastic guard once... now it works great... on Win, Rem & CCI primers... Link to comment Share on other sites More sharing options...
RiggerJJ Posted February 2, 2016 Share Posted February 2, 2016 One more thing to add; I change the RF back and forth between large and small primers on a regular basis. A small amount of tinkering and everything works fine... jj Link to comment Share on other sites More sharing options...
louu Posted February 2, 2016 Share Posted February 2, 2016 Slotbike what do you do for a living? I'm definitely in the wrong line of work. Link to comment Share on other sites More sharing options...
Slotbike Posted February 2, 2016 Author Share Posted February 2, 2016 I spoke to Dillon, yesterday.....because one of my 1050's started spitting primers all over the place just as I past 4700 rounds of .45ACP. I have that press completely apart now and am cleaning and lubing it. I spoke to them about the RF100. They told me to do a few adjustments, that I have already tried.......I guess it's trial and error. I'll work on them and report back, in a few days. G Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now