BMaus Posted February 23, 2016 Share Posted February 23, 2016 Even in the catalog, under technical data it says barrel length 119 mm, but in the writeup it says 125 mm. Hopefully it's 125 mm. Ok, so the barrel length in the 'Technical Data' has now grown to 120mm The general description and catalogue still say 125mm in several places. Obviously only one is right and I am still thinking its 125mm. A bit frustrating when you know how easy it is to fix a website and a problem like this continues for several days. Link to comment Share on other sites More sharing options...
PRanta Posted February 23, 2016 Author Share Posted February 23, 2016 It is a kind of tradition. CZ has got barrel lengths wrong for years. I think it is close enough . Link to comment Share on other sites More sharing options...
MilkMyDuds Posted February 24, 2016 Share Posted February 24, 2016 When will CZ-USA carry this? 2017? Link to comment Share on other sites More sharing options...
Prov1x Posted February 24, 2016 Share Posted February 24, 2016 When will CZ-USA carry this? 2017? Saw a post on Fbook today that said in June sometime. Link to comment Share on other sites More sharing options...
blind bat Posted February 24, 2016 Share Posted February 24, 2016 Why go to a single grip screw? Link to comment Share on other sites More sharing options...
slavex Posted February 24, 2016 Share Posted February 24, 2016 Correct me if I'm wrong but dont all CZs that use grip screws only use one? Never been an issue on the 6 I own Link to comment Share on other sites More sharing options...
bthoefer Posted February 24, 2016 Share Posted February 24, 2016 Correct me if I'm wrong but dont all CZs that use grip screws only use one? Never been an issue on the 6 I own They all currently use a single grip screw. It's dumb because it lets the grips move slightly if you put pressure at the top or bottom of them even with the best fitted grips. This is why a lot of grips work loose if you don't loctite the screws. Using 2 screws; similar to on a 1911, would fix this. The single screw works but could be much better. Link to comment Share on other sites More sharing options...
Tok36 Posted February 24, 2016 Share Posted February 24, 2016 Correct me if I'm wrong but dont all CZs that use grip screws only use one? Never been an issue on the 6 I own The CZ RAMI would be the single exception here. It uses two grip scerws per grip. Link to comment Share on other sites More sharing options...
adamge Posted February 25, 2016 Share Posted February 25, 2016 It is a kind of tradition. CZ has got barrel lengths wrong for years. I think it is close enough . Maybe they convert from mm to inch to mm to inch to mm? Link to comment Share on other sites More sharing options...
perttime Posted February 25, 2016 Share Posted February 25, 2016 It is a kind of tradition. CZ has got barrel lengths wrong for years. I think it is close enough . Maybe they convert from mm to inch to mm to inch to mm? Maybe they just make a new web page based on an old one - and forget to update some of the items. (... been there, done that) Link to comment Share on other sites More sharing options...
slavex Posted February 25, 2016 Share Posted February 25, 2016 I don't have any issues with my grips moving on any of my guns. I know that the grip screws can come loose, but that just needs a bit of loctite to deal with. Link to comment Share on other sites More sharing options...
PalmBeach1 Posted February 25, 2016 Share Posted February 25, 2016 I use a rubber o-ring and it holds the grips tight as could be. Don't like using loctite so it doesn't become a pain to take out. Link to comment Share on other sites More sharing options...
bigdave24 Posted February 25, 2016 Share Posted February 25, 2016 What size o ring? Link to comment Share on other sites More sharing options...
mrgrabow Posted February 25, 2016 Share Posted February 25, 2016 I'd like to find out if that rear sight can be fitted on an SP-01... Link to comment Share on other sites More sharing options...
polymerfeelsweirdman Posted February 26, 2016 Share Posted February 26, 2016 I need one of these Was ready to buy a P-09 or something but I think I'll save my pennies for a year or two instead... Link to comment Share on other sites More sharing options...
bthoefer Posted February 26, 2016 Share Posted February 26, 2016 I'd like to find out if that rear sight can be fitted on an SP-01... Rumor issad that it is a a Novak rear dovetail. Without machining the SP-01 dovetail it won't fit. Link to comment Share on other sites More sharing options...
slavex Posted February 26, 2016 Share Posted February 26, 2016 that rear sight does fit the regular Shadows, I'm snagging a dozen while at IWA Link to comment Share on other sites More sharing options...
ZachJ Posted February 26, 2016 Share Posted February 26, 2016 that rear sight does fit the regular Shadows, I'm snagging a dozen while at IWAHow much do you think they'll go for in Canada, if they get sold here? Link to comment Share on other sites More sharing options...
slavex Posted February 26, 2016 Share Posted February 26, 2016 the guns or the sights? I'd expect the gun to be at least $2400 Link to comment Share on other sites More sharing options...
Superpipe9 Posted February 26, 2016 Share Posted February 26, 2016 No way that guns $2400. The TS orange is only $1700. That would be ridiculous Link to comment Share on other sites More sharing options...
ZachJ Posted February 26, 2016 Share Posted February 26, 2016 the guns or the sights? I'd expect the gun to be at least $2400Was asking about the sights since I wasn't sure about the gun's price & whether I'd be switching over soon after it came out. $2400 though, I thought it would be more around $1200-$1500. Link to comment Share on other sites More sharing options...
gng4life Posted February 26, 2016 Share Posted February 26, 2016 If he was talking about $2400 CANADIAN, then that's about $1770 US. Since they do charge more in Canada than comparable models here, that's probably about right. Link to comment Share on other sites More sharing options...
ZachJ Posted February 26, 2016 Share Posted February 26, 2016 That makes sense, except the current shadow is about $900-$1000 CAD here, and I think czcustom has them for about $900 USD.... So here's hoping for a cheap upgrade. Link to comment Share on other sites More sharing options...
PalmBeach1 Posted February 26, 2016 Share Posted February 26, 2016 What size o ring? http://www.mcmaster.com/#9262k119/=11anwmq Link to comment Share on other sites More sharing options...
Quack Posted February 26, 2016 Share Posted February 26, 2016 In Czech CZ 75 SP-01 Shadow list price is 22990 CZK and Shadow 2 is 27900 CZK. Increase is 21%.So ~$1150 usd Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now