Cy Soto Posted December 4, 2013 Share Posted December 4, 2013 When dry firing, do you add an aiming spot on your targets or not? I began placing a small piece of 0.75" masking tape in the A zone but I don't know if this is the right thing to do. Link to comment Share on other sites More sharing options...
Steve RA Posted December 4, 2013 Share Posted December 4, 2013 Why not, if it helps you center on the target, do it. Link to comment Share on other sites More sharing options...
Alan550 Posted December 5, 2013 Share Posted December 5, 2013 The old saying goes "Aim small, miss small". It should read " Aim small, hit small". Link to comment Share on other sites More sharing options...
a matt Posted December 5, 2013 Share Posted December 5, 2013 Alan550 make a great point. Link to comment Share on other sites More sharing options...
G17 Posted December 5, 2013 Share Posted December 5, 2013 I don't dry fire with standard uspsa targets but i have 8, 7 inch bullseye targets taped up between the kitchen and living room. I like to practice transitioning and dry firing at different distances. The X ring in the center is about an inch and i always aim for that. These are the same targets i use when i go to the range and i definitely believe it makes me a better shooter. Just like everyone says aim small miss small. Link to comment Share on other sites More sharing options...
frankie Posted December 5, 2013 Share Posted December 5, 2013 I use 8" USPSA targets that I made. They work very well. " Link to comment Share on other sites More sharing options...
Chris iliff Posted December 5, 2013 Share Posted December 5, 2013 Yes, think of it as "good for the index". That pic is just about where I put my little black spot on my scaled targets. I think it is a very good practice and helps condition us. Link to comment Share on other sites More sharing options...
Reshoot Posted December 5, 2013 Share Posted December 5, 2013 Yes, absolutely, a good idea! I use a 2" spot on metric targets at 10 yards. On metric targets at distance . . . say 30 yards . . . I outline both A zones with a marker. I like the border to be a 3/8" wide line. But then, I have old eyes Link to comment Share on other sites More sharing options...
Flexmoney Posted December 5, 2013 Share Posted December 5, 2013 I always liked the idea of using a properly shaped target, to help train the subconscious to recognize the visual relationships better. Then again, I also liked to experience a variety targets, shooting conditions, colors, etc...to help become aware of what differences they might make and how I respond to them. As for the "target spot"... http://www.brianenos.com/forums/index.php?showtopic=32703&hl=%2Btarget+%2Bspot Link to comment Share on other sites More sharing options...
Cy Soto Posted December 5, 2013 Author Share Posted December 5, 2013 I always liked the idea of using a properly shaped target, to help train the subconscious to recognize the visual relationships better. And therein lies my dilema... Having an aiming spot helps me find the center of the target during dry fire but this indicator is not present on match day. Link to comment Share on other sites More sharing options...
CHA-LEE Posted December 5, 2013 Share Posted December 5, 2013 Practice with what you will experience in a match. There will not be an "aiming spot mark" on the targets during match day. Simply pick a specific place on the target to aim at. You don't need to mark the target to do that. Link to comment Share on other sites More sharing options...
Flexmoney Posted December 5, 2013 Share Posted December 5, 2013 I always liked the idea of using a properly shaped target, to help train the subconscious to recognize the visual relationships better. And therein lies my dilema... Having an aiming spot helps me find the center of the target during dry fire but this indicator is not present on match day. But, you do get the other inputs, like the outline of your target with relationship with your sights. That might be more of a "gross" input...which might not be as refined, but could give quick information. Link to comment Share on other sites More sharing options...
Chris iliff Posted December 6, 2013 Share Posted December 6, 2013 I found that the target spot in DRYFIRE conditioned me to aim for the same spot in matches. My eyes just went there, even though there was no black spot. For me, it helped, especially with partials. Instead of giving up points and shooting for the center of brown, which on a partial ends up being in the C zone, I was conditioned to my target spot. I can see where this is kinda a shooters choice type of thing. For some, no help, or maybe it made no sense. For me it helped a lot and was a benefit. I would suggest giving it a try based on my experience, ymmv. Link to comment Share on other sites More sharing options...
ZackJones Posted December 6, 2013 Share Posted December 6, 2013 I tried this last night and I'm certain it will help me. I put two targets as far apart as I could in the garage. On one I had a spot and on the other I didn't. I found, as Chris points out, that my aim on the target without the spot was pretty much the same as the target with the spot. I'm going to work on it again tonight and hopefully apply what I've learned in a match tomorrow. Link to comment Share on other sites More sharing options...
wurm Posted December 6, 2013 Share Posted December 6, 2013 I found adding an aiming spot to be helpful as a training tool. I also have a couple of dry fire targets with the A zone outlined in marker so it is really visible. My basement dry fire area doesn't have the best lighting. I don't really use them anymore but when I did I made sure to still do most of my practice on targets without extra markings. For me, it really helped me to stop shooting at brown and really concentrate on aiming exactly where I wanted to hit. Link to comment Share on other sites More sharing options...
LilBunniFuFu Posted December 8, 2013 Share Posted December 8, 2013 I use a black paster just above the A. Gives you something to snap too quickly. Link to comment Share on other sites More sharing options...
ZackJones Posted December 9, 2013 Share Posted December 9, 2013 I can't say for certain that I was able to pick out a specific paster or spot on the target but I do know that repeating "aim small, hit small" really helped me at the match yesterday. I know it's not really an apples to apples comparison but my A hits improved from a total of 43 (54%) out of 80 shots fired in the November match to 64 (60%) out of 106 shots fired in the match yesterday. Link to comment Share on other sites More sharing options...
blaster113 Posted December 9, 2013 Share Posted December 9, 2013 I think an aiming spot will help with building an index for dryfire/livefire practice, but be careful not to become to dependent on it. As skill and experience come then the aiming spot can go as it won't be there match day. Link to comment Share on other sites More sharing options...
mercer Posted December 19, 2013 Share Posted December 19, 2013 Thats right a matt. Aim small, hit small!! Link to comment Share on other sites More sharing options...
BSeevers Posted December 19, 2013 Share Posted December 19, 2013 I use both. The spot is for training to allow us to make sure we are aiming correctly. Seeing what we need to see and verify that our sight pic is one that allows the best shot and highest score i would never use it exclusivly in dry or live fire. Link to comment Share on other sites More sharing options...
CHARLES D Posted December 19, 2013 Share Posted December 19, 2013 I use a standard/metric target with hard cover painted on it. In addition, I place two tennis balls at different distance from the target. This helps me shooting steel. I just tell my sub concience to shoot the tennis ball. Link to comment Share on other sites More sharing options...
Sac Law Man Posted December 20, 2013 Share Posted December 20, 2013 My only issue with the spot is this, you are training yourself to look for a small spot within the A zone which may not be there during an actual match. if you are bypassing seeing the scoring zone, you are training yourself improperly. When I dry fire at a target, my #1 goal is to see the perforations or scoring rings, then line my sights up in the middle of that zone and press. Link to comment Share on other sites More sharing options...
grapemeister Posted December 20, 2013 Share Posted December 20, 2013 My only issue with the spot is this, you are training yourself to look for a small spot within the A zone which may not be there during an actual match. if you are bypassing seeing the scoring zone, you are training yourself improperly. When I dry fire at a target, my #1 goal is to see the perforations or scoring rings, then line my sights up in the middle of that zone and press. I disagree. I think you're wasting too much time looking for perforations. I think it's more beneficial to learn where to line up the sights on any given target and at any distance for the best possible hits. Stickers, sticky notes, or some kind of spot on a target can help with training yourself to index on and aim at a specific spot on a target. This is especially helpful to shooters that are new to practical shooting and aren't accustom to having nothing but plain brown cardboard targets to aim at. I find square yellow sticky notes very helpful when group shooting, and when I'm working on keeping tight groups when shooting doubles. Sometimes I make things even more interesting and harder by using the thin white backing from pasters rather than the larger sticky notes. I've never found myself in a match looking for yellow sticky notes on the targets, and I've never heard of anybody else looking for them when shooting a stage. But, I have heard new shooters complain that they can't see the perforations on a target. Link to comment Share on other sites More sharing options...
Sac Law Man Posted December 20, 2013 Share Posted December 20, 2013 (edited) I dont see any difference in seeing a scoring zone, versus a spot on the target! This will be different for each shooter depending on their eye sight. You would be amazed at how fast your eyes can focus. I have read (and believe) that it is no slower to see a spot or scoring zone clearly while driving the gun, as opposed to just aiming at the center of a target. I think new shooters dont see the perfs, becasue they have not learned visual patience, either that or they dont know any better. I look for scoring zones--on most targets.. in my opinion, what I want to avoid is aiming at the center of a big brown target. I also see your point.... maybe im mistaken.. Edited December 20, 2013 by Sac Law Man Link to comment Share on other sites More sharing options...
grapemeister Posted December 20, 2013 Share Posted December 20, 2013 Think of it this way. You already know where the perforations are, so why look for them. You don't need perforations in order to line your sights up on the center of the A zone or whatever portion of the A zone is available. Besides, we don't always have the benefit of nice clean targets to shoot. What are you doing with targets that have been shot by several different squads, and pasters are covering a good amount of the perforations? What are you doing with targets that are anywhere from 25 to 50 yards out and the perforations are hard, or impossible to see. Why not, when transitioning from target to target, just go directly to the A zone rather than wasting time on the visual input of the perforations? "in my opinion, what I want to avoid is aiming at the center of a big brown target." Why not? The lower A zone is centered a bit higher than center mass, but you get my point.....maybe? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now