Avedis Posted September 26, 2015 Share Posted September 26, 2015 Freshly Black Nitrided CZ TS w/ Titanium Nitride Barrel and a bunch of other mods. Link to comment Share on other sites More sharing options...
JMike Posted September 26, 2015 Share Posted September 26, 2015 Freshly Black Nitrided CZ TS w/ Titanium Nitride Barrel and a bunch of other mods. That is beautiful! Love the color! Link to comment Share on other sites More sharing options...
Matt1 Posted September 27, 2015 Share Posted September 27, 2015 Excuse the picture. Only one I could find. TS in .357 Sig (.40 gun with a Sig barrel from CZC), RHT thumb rest, ext lh safety (shaped to clear my lh thumb), modified rh safety (it's basically just the nub. Done to fit the box), Czechmate magwell, CZ short aluminium grips, 7.5mm fibre front sight and stock fixed rear. Waiting on some paper work so I can pickup a TS Orange. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
rancher5 Posted September 27, 2015 Share Posted September 27, 2015 Hello guys. I have a new to me CZ Tactical Sport coming in and I would very much like to see what everyone else has and what, if any thing, they have done to theirs. Thanks guys.I bought my TS about a month and a half ago and the only mods I've made were a Hogue Monogrip, Wolff 13# hammer spring and I polished the crap out of the feed ramp/breech face; at first I had some jams from rounds nose diving, but then I turned the feed ramp into a mirror and have had no issues since. Next mods on my list are CZ Custom base pads and mag well, down the road I may consider: comp hammer (once CZC has them back in stock), slide lightening cuts, remove checkering from front and rear of grip, undercut trigger guard/beaver tail (at which time I might refinish in black). Some people like to hack back the dust cover, but I feel like the static weight helps soak up a lot of recoil, so I would rather take weight out of the slide.Your insights our always great, been wondering what to do to my, TS, its such a great pistol w/almost unlimited potential , really like the grip reduction idea. Whats best way to remove checkering or at least reducing.? Link to comment Share on other sites More sharing options...
rancher5 Posted September 27, 2015 Share Posted September 27, 2015 I would love to handle one of these TSs with the cut dust cover; that's the thing about mods like this, there's no going back. I feel like the full dust cover soaks up so much recoil it would be a sin to cut it off, I would rather start by taking weight out of the slide. Then again, I'm just a new guy talking out of his ass, what say you masters of the CZ? This is the one I want Would you mill the slide, for weight reduction, could look and be very cool Link to comment Share on other sites More sharing options...
kneelingatlas Posted September 27, 2015 Share Posted September 27, 2015 Whats best way to remove checkering or at least reducing.? When removing metal, you can go as fast as you feel comfortable: sand paper is the safest, an angle grinder is the fastest, a belt sander is in between. I recommend Emory cloth, if that's goining too slow you can always step up to a belt sander, but just remember: it's a lot easier to remove metal than to put it back Link to comment Share on other sites More sharing options...
rancher5 Posted September 27, 2015 Share Posted September 27, 2015 Whats best way to remove checkering or at least reducing.?When removing metal, you can go as fast as you feel comfortable: sand paper is the safest, an angle grinder is the fastest, a belt sander is in between. I recommend Emory cloth, if that's goining too slow you can always step up to a belt sander, but just remember: it's a lot easier to remove metal than to put it back Thanks you so much, yes so caught up in the TS thread I realized its almost going on 3 yrs, wow, had mine for few months and just shy of 5000 rds, wanted to lighten it, but don't want any down time, You run minor and majors w/ur TS? Beautiful gun u have or should say gunss, TY Link to comment Share on other sites More sharing options...
rancher5 Posted September 27, 2015 Share Posted September 27, 2015 Whats best way to remove checkering or at least reducing.?When removing metal, you can go as fast as you feel comfortable: sand paper is the safest, an angle grinder is the fastest, a belt sander is in between. I recommend Emory cloth, if that's goining too slow you can always step up to a belt sander, but just remember: it's a lot easier to remove metal than to put it back Thanks you so much, yes so caught up in the TS thread I realized its almost going on 3 yrs, wow, had mine for few months and just shy of 5000 rds, wanted to lighten it, but don't want any down time, You run minor and majors w/ur TS? Beautiful gun u have or should say gunss, TYYes, I'll do grip reduction by hand, see howvit feels as I go. Power tools can wack to much off to fast, tho tempting Link to comment Share on other sites More sharing options...
Leadpilot Posted September 27, 2015 Share Posted September 27, 2015 Just finished this today. It's a "CZ 75 SP TACTCAL SHADOW SPORT 01":) Link to comment Share on other sites More sharing options...
kneelingatlas Posted September 27, 2015 Share Posted September 27, 2015 Nice work Ryan! Link to comment Share on other sites More sharing options...
kneelingatlas Posted September 27, 2015 Share Posted September 27, 2015 You run minor and majors w/ur TS? I've always shot major through my TSs, I recently sold all my Limited guns so I only have one TS left at the moment and it's a 9 major Open gun. Link to comment Share on other sites More sharing options...
rancher5 Posted September 28, 2015 Share Posted September 28, 2015 You run minor and majors w/ur TS?I've always shot major through my TSs, I recently sold all my Limited guns so I only have one TS left at the moment and it's a 9 major Open gun.Saw the milled slide did you port barrel to, I've seen lots of your project guns all great, tho not sure what TS you have left, thanks for taking the time, as an older guy this is new to me, Link to comment Share on other sites More sharing options...
kneelingatlas Posted September 28, 2015 Share Posted September 28, 2015 This is what it looked like last time it was together, but at the moment it's in pieces waiting for it's next life to start Link to comment Share on other sites More sharing options...
rancher5 Posted September 28, 2015 Share Posted September 28, 2015 Beautiful, functional, hows compensator attach, threaded I suppose, shoot major and minors w/minimum change over, exactly what I want to do. Thank you, for sharing Link to comment Share on other sites More sharing options...
jayjay1 Posted September 28, 2015 Share Posted September 28, 2015 Always a work in progress.... Link to comment Share on other sites More sharing options...
magpulled Posted September 28, 2015 Share Posted September 28, 2015 I sent my TS off for slide lighting, grip reduction and getting the frame chopped. It's been 4 weeks to the day and I've got 4 weeks left to wait. I have no patience !! Link to comment Share on other sites More sharing options...
rancher5 Posted September 28, 2015 Share Posted September 28, 2015 I sent my TS off for slide lighting, grip reduction and getting the frame chopped. It's been 4 weeks to the day and I've got 4 weeks left to wait. I have no patience !!Who did you send your TS to, luv see it when uget it back Link to comment Share on other sites More sharing options...
magpulled Posted September 28, 2015 Share Posted September 28, 2015 Matt mink said he could do everything so I gave him a shot. I'll be sure to get pics up as soon as I get it. Trying to decide what cerakote colors now. Link to comment Share on other sites More sharing options...
cpa5oh Posted September 29, 2015 Share Posted September 29, 2015 Anybody know how much the TS grip can be reduced by? Maybe a front to rear caliper measurement from a CTS or other TS with grip reduction done by CZ Custom? Link to comment Share on other sites More sharing options...
adamge Posted September 29, 2015 Share Posted September 29, 2015 cpa, why not just pick up a CZ based on a 75 frame, like a Shadow, instead of the TS? Link to comment Share on other sites More sharing options...
SDM Posted September 29, 2015 Share Posted September 29, 2015 cpa, why not just pick up a CZ based on a 75 frame, like a Shadow, instead of the TS? I'm not cpa but the answer is capacity for Limited. 20 or more rounds (.40) instead of 15 or 16 in the 75 frame. Link to comment Share on other sites More sharing options...
cpa5oh Posted September 29, 2015 Share Posted September 29, 2015 Exactly - I get 21 reloadable in my TS mags in .40...plus I'm not a big fan of the Shadow - I don't like the short sight radius. Link to comment Share on other sites More sharing options...
Toolguy Posted September 29, 2015 Share Posted September 29, 2015 OK - why do I only get 20 in my TS 9mm if you guys are getting 21 in .40 cal.? Link to comment Share on other sites More sharing options...
cpa5oh Posted September 29, 2015 Share Posted September 29, 2015 I think the TS 9mm has its sides pinched in? Don't know that for sure... Link to comment Share on other sites More sharing options...
Jay870 Posted September 29, 2015 Share Posted September 29, 2015 OK - why do I only get 20 in my TS 9mm if you guys are getting 21 in .40 cal.? You should be getting 20 9MM in an OEM mag. 21 in a .40 cal is with an extension and CZ Custom spring/follower. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now