vernbo

one wall outlet wired to its own 0 to 6 hour countdown timer,so you can turn on vibrator as you are leaving the shop. http://www.mcmaster.com/#cycle-timers/=9u1hij

The Gem City Practical Shooters will hold matches indoors on the 2nd and 4th Sunday of January, February and March. Wintertime squads will go out at these approximate times: 8:00, 9:30, 10:45, 12:00, 1:15, 2:30 and 3:45 http://www.gemcitygunclub.org/

are there Categories approved for individual recognition ? a. Lady b. Junior Competitors under the age of 18 on the first day of the match. c. Senior Competitors over the age of 55 on the first day of the match d. Super Senior my 9 year old grandson likes to help so that is one of his jobs now

both bolts are #10-24threads per inch. And the press on head knobs are the best idea. if you want to take it to an even more convenient level ,slot the track in the-[bottom of the primer cam]- and the -[slot the bolt goes through]- in the black plastic peace it bolts to, so all you have to do is loosen the thumb screw ,slide the primer cam back to the end of its travel and it will stop dropping case out of the case feed tube.

http://www.wisc-online.com/objects/ViewObject.aspx?ID=MSR2202 click the play button to see how they are used.

Monty Python Silly

How about we name stage #1 knuckle under to the man because you did away with the 60 yards weak hand string.

My trigger started sticking on my rock island frame last week also, the solution ended up being the stop set screw in the trigger getting jammed in the slot of the mag release.

you are welcome.

reading this would be a good starting point. http://www.brianenos.com/forums/index.php?showtopic=584

start with the basics - do you have primers in the primer disk? you do know you have to 'push' the handle forward to seat primers? do you have the correct primer punch installed -large or small?

If you follow this topic to post# 10 about fitting arredondo inserts into dawson base pads. http://www.brianenos.com/forums/index.php?showtopic=46977&st=0&p=537645entry537645

I believe it's back up and running http://www.mattburkett.com/flashfiles/dryfire.html

I've had one for over a year , works just like it should , it fits nice in the front pocket with one of these. http://www.desantisholster.com/storefrontB2CWEB/itemdetail.do?action=prepare_detail&itm_id=2051&itm_index=0

sdm also makes a gold bead sight would that work ? http://www.sdmfabricating.com/Gold%20Bead.htm

If you need to see it for reference.

Sdm Fabricating in Medina, OH 44256-9012 scott Mulkerin knows smiths, he turned my 610 into a bowling pin gun.

The oldest grandson was able to get here to Ohio for Christmas with us , a few weeks ago he was in the Persian gulf then Qatar then San Diego. Tomorrow back to San Diego .

Yes they are the real thing . it's a brick and mortar business in Burton OH. they started at the Burton fair grounds ,with all of the guns out on tables each month. I have been to the auctions ,before they started selling them with --on line auctions-- all of the guns are sold on concession from people sending them in.

Congratulations -- sandbagger--

The ram has a rack gear underneath to move the ram in and out by rotating the pinion gear. Move the ram out as far as the pinion will take it ,remove the set screw in the turret casting holding in the pinion gear. Remove the pinion gear by pulling it straight out. Block up the ram off of the table with some kind of timbering, take off some of the weight of the ram by cranking the table up and until the ram will slide out. Then you will have the ram out of the dove tail ways, it is heavy. You are taking the head off first right?

Did you know if you drive off the island west on Van Horn over to rt. 23 at Dundee there is a Cabela’s with lots of safes. I get over there when I visit my brother he lives in Taylor.

we talked about that before here. http://www.brianenos.com/forums/index.php?...c=79693&hl=

You need to remove any movement with the case feeder as the press is cycled . Make the bench more sturdy or heavier or attach the casefeeder to a wall with some kind of bracing .

you are correct sir ,just saying you are on the correct path with the drill ordered.