vernbo

The wings or tabs that are used for stopping forward movement are adjusted by pushing them forward enough to stop the triggers forward movement. Any setscrew in that area would be in the way of the magazine passing through the bow. Any fixture used for adjusting the forward movement must have reformed the shape of the trigger bow?

Our 2011 awards banquet trophy for last year makes me feel better every time I pick it up! Gem city gun club Erie Pa.

the last load in the 115 grain uses VV110 for only 1174 feet per second.

The wide also gives more material for threads if useing a scope mount.

I saw this video on youtube RCBS Trim Pro with RCBS 3-way cutter head. Trim, Chamfer, and debur in one step. Total cost of this setup is about $150.00 so I made the same setup ,works great.

hope this helps.

Cerrosafe Chamber Casting Alloy 1/2 lb Cerrosafe is the best known material from which to make a casting of the chamber and throat of a firearm - to determine caliber or check the dimensions. It melts at a temperature just above M&M's, so all you need is a propane torch and a bullet casting ladle. It can also be used to make a cast of a dovetail slot or any other hard to measure area. Also, it is great for removing the front half of a case from the chamber, in the event of case head separation http://www.midwayusa.com/product/462291/cerrosafe-chamber-casting-alloy-1-2-lb

If you would like a preview of the size of the indoor range this was Matt’s toys for tots 2011 match.

"I don't want to burn out my barrel shooting that fast"

here's what we do when we move indoors in the winter. http://s397.photobucket.com/albums/pp51/vernbo51/?action=view&current=VID00007.mp4

the question now, what are you going to do with it?

Bill when you started shooting with Colleen did you ask her : ∙ do you want to use a open race gun in USPSA ? ∙ or do you want to be in SASS and dress up like a COWBOY ? I think she misunderstood .

how to adjust leadscrew nuts http://www.metalworking.com/dropbox/Bridgeport-nut-splitting-%26-backlash.pdf

have you made sure you have small primer wheel tray and small primer punch installed? why is dillon sending a new shell plate? you are using a number 5 right?

marvel top end ,on a $89.00 rock island frame with 15 round ciener mags.

then we must assume the large button hose clamped to the steering column starts the timer

would this work on a mac? http://gunwiki.net/apps/calconversionsheet/index.asp?ml=1&cal_37=D&cal_55=D&cal_30=D&cal_38=D&cal_56=D&cal_7=D&cal_40=D&cal_5=D&cal_31=D&cal_39=D&cal_2=H&cal_61=D&cal_22=D&cal_26=D&cal_8=H&cal_44=D&cal_27=D&cal_62=D&cal_41=D&cal_28=D&cal_32=H&cal_1=H&cal_51=D&cal_33=D&cal_42=D&cal_53=D&cal_21=D&cal_43=D&cal_52=D&cal_9=D&cal_63=D&cal_54=D&cal_14=D&cal_64=D&cal_12=D&cal_46=D&cal_69=D&cal_58=D&cal_15=D&cal_66=D&cal_59=D&cal_65=D&cal_23=D&cal_13=H&cal_18=D&cal_68=D&cal_36=D&cal_19=D&cal_45=D&cal_29=D&cal_48=D&cal_49=D&cal_3=H&cal_24=D&cal_50=D&cal_35=D&cal_47=D&cal_17=D&cal_6=D&cal_20=D&cal_25=D&cal_34=D&cal_11=H&cal_16=D&cal_60=D&cal_10=D&cal_57=D&cal_4=H&go=Preview+Sheet

A guy walks into a bar with his pet monkey. He orders a drink, and while he's drinking, the monkey jumps all over the place, eating everything behind the bar. Then the monkey jumps on to the pool table and swallows a billiard ball. The bartender screams at the guy, "Your monkey just ate the cue ball off my pool table -- whole!" "Sorry," replied the guy. "He eats everything in sight, the little bastard. I'll pay for everything." The man finishes his drink, pays and leaves. Two weeks later, he's in the bar with his pet monkey, again. He orders a drink, and the monkey starts running around the bar. The monkey finds a maraschino cherry on the bar. He grabs it, sticks it up his ass, pulls it out and eats it. The bartender is disgusted. "Did you see what your monkey did now?" he asks. "Yeah," replies the guy. "He still eats everything in sight, but ever since he swallowed that cue ball, he measures stuff first."

from the BROWNELLS page: ""ROOM TEMPERATURE NICKEL STRIPPER Mfr:BROWNELLS Status:In Stock Strips All Types Of Nickel Plating Without Heating Or Agitation Convenient, easy-to-mix and use liquid completely removes both electrolytic and electroless nickel from steel, copper and copper alloys without heating or agitation. Safe and simple to use; usual stripping time is 30 minutes to 4 hours. Re-bottle and use again and again. Gives off strong, ammonia order, use with adequate ventilation"" http://www.brownells.com/.aspx/pid=1102/Product/ROOM_TEMPERATURE_NICKEL_STRIPPER

untill you get a real timer try this http://www.predatortactical.com/cart.php?m=knowledgebase_detail&id=5

The club I listed in post number 2 should be within 50 miles from Cleveland, It is an USPSA club but not on the weekend the original poster was asking about.

one wall outlet wired to its own 0 to 6 hour countdown timer,so you can turn on vibrator as you are leaving the shop. http://www.mcmaster....-timers/=9u1hij

not an uspsa match but , match based upon steel challenge, with rimfire -centerfire. http://practicalpistol.net/

1. Assemble the mainspring cap, mainspring, and mainspring retainer then insert into the mainspring housing. 2. Carefully depress the cap far enough to allow you to install the small 1/16 inch pin. 3. Carefully and slowly release the pressure on the spring cap until the pin captures it.