Bwillis

out of curiosity what brand battery do you use?

https://palmettostatearmory.com/psa-custom-ar-9-enhanced-firing-pin-116003.html IMO best firing pin for the price. It has a taper instead of a shelf. https://www.shootersconnectionstore.com/Wilson-9mm-AR-Firing-Pin-Spring-P5156.aspx also replace the firing pin spring while you’re at it. https://www.shootersconnectionstore.com/Wilson-9mm-AR-Firing-Pin-Spring-P5156.aspx

@bwikel

@Darqusoull13 synthetic coated bullets produce lead fouling. The powder (sport pistol) burns the coating off the base causing exposed lead. To your other point it is impossible to shoot out lead fouling from a comp with ports, or a comp with small holes like the answer. It is possible to shoot the lead hanging in the baffle but that leads to inaccurate rounds.

Jhp https://www.evergladesammo.com/ammunition/handgun-ammunition/9mm-115gr-jhp-ammo-new.html https://www.targetbarn.com/9mm-ammo.php?jacket_type=104 cmj (complete metal jacket) https://www.luckygunner.com/9mm-115gr-cmj-fiocchi-1000-rounds Tmj (total metal jacket) https://www.targetbarn.com/9mm-ammo.php?jacket_type=80 If the link posted doesn’t pull up the listed bullet types change the filter in the search at target barn. My preferred ammo is from Everglades but I listed other choices. The cmj and tmj are round nose profiles without exposed lead bases. Welding splatter also works to keep the comp clean of fouling.

Mbx Mr softy

The m2 ratchet will tighten the noose more than I can get hand tight. However you are correct the noose belt will cause the ratchet to slip a notch if it is over tightened. Ive used either a carbon arms or Weber belt with the noose combo for almost a year with open rig on one and pcc mags on the other without issues.

nerd noose inner belt is stiff enough, it doesn’t bunch up when ratcheted tight.

@echotango @DD78 I understand removing material from the cheapest part but it was easier for me the file down the tabs. If someone makes 6 notch’s in the magwell they all have to line up have the correct depth and be perfect. It’s easier to file and fit the tabs. If you’re worried about messing up $650 dollar steel grip you probably shouldn’t be working on the gun in the first place Imo.

All last season I used the daa racemasters with glock 33 rounders and sometimes stage depending a glock 31 with a +10 extension. I used the glock inserts but non pcc length and never had issues. I was also able to use them bullets down (my preferred method) or bullets up.

They make quality stuff and have excellent customer service. Their belts are best on the market I have 3 in different colors. I used their mag carriers when I shot 3 gun and never had a mag fall out.

The evo grip has 3 tabs per side (6 total)..I dremeled the tabs almost flat to installed the magwell. When using the dremel take a little material and try to slide the magwell on... wash rinse repeat until it fits snug. in total less than 10 min to disassemble fit and reassemble

Everyone’s strength and weaknesses are different. I think having the weight balanced is key to have a top preforming pcc. My preferred weight of pcc is 7ish lbs unloaded. I’m also able to balance the pcc on the magwell without it tipping either direction. Raw speed on transitions aren’t everything more speed lends to over/under transitioning. Be more efficient in the direction of travel on transitions and the timing of the shooting to be faster not necessarily raw speed.

If I could go back in time, I would have only posted a drill and ignored the above comment about only listening to certain people that post.

Rafferty customs

Kuhl renegade for pants Patagonia all wear for shorts

Optics planet had them at $515 and 11% off a couple days ago

Starts Friday ends Monday- mpx comp only fits gen 1-2

Are you using the mbx short stroke kit? Try switching the buffers inner from the red spring to the blue spring. hiperfires have zero takeup, they are instantly at the wall if you hold your finger in the correct place and mouse click it creates a bump fire.. hiperfire are the easiest trigger to do this with.

Nerd inner belt is great rigid and durable https://www.weare-nerd.com/competition-products/the-noose-inner-belt

@TANFARM Try the jhp Everglades v2 or Montana golds the nose on these two are a little bit harder than pd.

@emjbe read my text above the picture. Substitute the word (one) with the phrase (a 45* offset). You are correct the picture illustrates poa for a primary optic on a rifle that is canted. not me in the video below just a reference

Stripper spinning pole grip https://www.amazon.com/Strength-Absolute-Control-Fitness-Sports/dp/B00KDML8JM/ref=asc_df_B00KDML8JM/?tag=hyprod-20&linkCode=df0&hvadid=310249230164&hvpos=1o2&hvnetw=g&hvrand=17306273555923316819&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=1025965&hvtargid=aud-801381245258:pla-523807963575&psc=1&tag=&ref=&adgrpid=59843340857&hvpone=&hvptwo=&hvadid=310249230164&hvpos=1o2&hvnetw=g&hvrand=17306273555923316819&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=1025965&hvtargid=aud-801381245258:pla-523807963575

I filed the 6 nubs on the grip. Took less than 5 minutes and is rock solid.