DRobson

Monster and whatever junk I decide to get from the gas station.

Slide racker yes but not the comp. You just clean the barrel while still in the slide. You can maneuver the barrel within the slide to get a pretty good cleaning.

powdervalleyinc.com

Trade it. where are you located?

MBX Mags

Just hold off a little while. New mags are coming out soon. 30rd big stick $160 complete

It's that big ass rim on the end of the cartridge causing all the trouble.

4.5 gr of n320 with a 180 bayou(same coating as BBI) @ 1.185 was 169pf out of my 5" limited

Do a search on here for tight group and 124's. You will find more than you ever wanted. I don't use TG or I'd just pass along my load info.

What powders do you have?

It's the holidays and weather could be bad. I've had a few shipping delays in the past few weeks.

3n38 with coated lead easily makes major.

9mm 170 STI with grams guts and grams 4mm pad= 29+1 Dawson pad gave me one less New 170 SVI with Taran guts and taran 3g pad = 30+1

+1 for stacking two 357's.

Get a matchmaster in 9mm if you want the look of the steelmaster.

HS-6 will work great in that setup. I shot one with a similar setup and the guy was using HS-6 with a 115.

TTI guts and pads. The pads are easy to take off and less bulky than the dawsons. I get 21+1 in sti tubes.

March 2015

I must be lucky. I bought 3 new mag bodies and used taran pads and guts. All three will get 21.

yes

There's no need to remove the comp again unless you are going to replace it. You and move the barrel around in the slide enough to get everything clean.

Thanks for the replies. This gives me a whole lot better idea on what to get.

Is the one piece sear a factory part? Also, what's involved in fitting the EG hammer? Thanks for all the help so far.

I've done a bit of searching and seem to get mixed answers. I just got a 9mm stock 2 and was curious what you guys feel the essentials are. I'm new to the Tanfoglio thing. What weight recoil spring? Hammer spring? Grips? Front sight? ect Any help will be appreciated.

I may be interested in buying the grips if you decide to just sell.