blueeyedme

I run WAC at 175pf. All I have ever loaded is range brass. Have had 1 case seperation in the 3 years my wife and I have been shooting open.

I clean my brass like this... https://dl.dropboxusercontent.com/u/57907457/Tumbler.mp4

I have been researching this myself. Check out this guy's solution. Looks pretty good. https://youtu.be/rG1HzonMVDc

That looks great. Is that a hard foam?

I have a larger Pelican case for airline travel - which works great by the way. However after a few trips the pick n pluck foam is just not holding up. Is there anyone who does custom foam inserts with a denser foam? Thanks!

Before I went with in-ear Westone Defendear Digitals, I used MSA muffs with gel cups. The best muffs you can buy IMHO.

I have only run WSPM in my 9 major rounds. Has worked great for me.

121 IFP MG (9mm) 7.5 WAC 1.168 NO popple holes 176 pf

Love my Manny magnetic. I believe he still sells them and you can contact him directly at mannybraggusa@yahoo.com

I have several older German made Sigs and they all rattle to some extent. I always greased (not oiled) the rails and they have run very nicely for me.

FYI - when you registered, you were given the opportunity to enter a PIN so you could comeback and make changes later if necessary. If you didn't enter one, you don't have one.

I was wondering that myself. So many shooters started with a hovered hand but since nobody really practices that way is it an advantage? In my book, probably not. In any event, thanks for coming down and shooting our State match. Hope to see you at the Florida Open.

I see this come up once in a while and I don't shoot open minor so forgive me if this is a silly questions...how does a minor load work the comp? I love my 9 major load but I have it cranked up to 175pf to work the comp.

I was a CRO at that match & the WSB was "standing in the shooting area, anywhere, anyhow". During our staff briefing, this was defined for us as pretty much anything goes as long as you are not touching the gun & mags. So you want your crouching tiger start position, that was fine. I like what someone posted earlier using the language "shooters choice" and will pass that one on to the RM..

Couple of not in the manual of tips that helped me when I was starting out...put your RF on a mousepad...stretch the spring on he bottom to put more upward pressure on the tube....and clean your tubes. In any event, very happy with mine. Have only run Winchester through it.

Welcome to the forums! Hope to see you at the WAC which is my home range.

Seriously? Spend the $1k - you have enough brass to more than pay for the sorter and then you have a sorter. I have the ultimate sorter http://www.ultimatesorter.com and am quite happy with it. I hate sorting and cleaning brass....so I collect all year, sort with the sorter and clean by the bucket in a cement mixer all in one weekend and then I am done until next year. I keep what I shoot and sell off the rest. That is fine, if you belong to the "brass is brass" school. But there are many reasons to sort the brass below that level. Yes sir! ....you can still hand sort to your hearts content with nice clean brass. Personally, I don't sort by headstamp but any brass I shoot is rollsized, then processed before I do a loading pass.

What they said.....or you will have a loose sight. Just don't ask me how I know....

I like the DoubleAlpha dust cover myself.

Seriously? Spend the $1k - you have enough brass to more than pay for the sorter and then you have a sorter. I have the ultimate sorter http://www.ultimatesorter.com and am quite happy with it. I hate sorting and cleaning brass....so I collect all year, sort with the sorter and clean by the bucket in a cement mixer all in one weekend and then I am done until next year. I keep what I shoot and sell off the rest.

I ran 330 for my 9mm production loads and was very happy with it. For .45 single stack I preferred 310.

Have had no problems with either of our RTS2 since they both went back for the V3 build last summer.

MG 121 @ 1.168 - no spacers.

Welcome to this awesome forum! Manny is launching a new website in the next couple of weeks... mannyusa.com - but it's not up yet. In the meantime, you can contact Manny directly at Mannybraggusa@yahoo.com

I just bought a Kahles K16i from http://www.techeyes.com. Great service and negotiable on prices of high-end glass.