huskerlrrp

I keep checking their website. Maybe one of these days....

For what it is worth, I'm not sure if it's USPSA "Production" or IDPA SSP legal to have the hole added. If you are modifying a CZ75, check out CajunGunWorks. I put their short reset lifter kit in and it really shortened the travel. They have some other good parts as well.

I drilled the hole for the extended guide rod in my CZ75 slide. I have not had a single problem. Just make sure your layout is exactly right before center punch/drill. Here's a crappy picture....

I couldn't get a slot.....damn you people with predictable jobs!

That's an interesting hammer.

It should contact just after the "breaking point" of the action (where the hammer drops). For example, put some blue lock tite on the screw. Turn the screw clockwise until pulling the trigger won't drop the hammer. Then back off (counterclockwise) until it does. Make sure this functions in both double action and single action mode. Then turn an additional 1/4-1/2 turn counterclockwise (out) to account for "the ghost" in the mechanism.

They ran out of room with all the options that they've come out with

+1

I like the Piranha texture myself.

I haven't measured them, but the factory rubber feel "thicker" than the VZ grips. I am willing to sacrifice the larger size for that grippy goodness of the G10 aggressive texture.

I think CZ Custom is the only one doing the barrel bushing for that slide. Cajun Gunworks does the 97 model. I'm sure others could do it, but given their experience I'd recommend them.

I have not seen a ST with a rail. My P22x ST (stainless elites) do not have the groove for the magwell.

The stainless full length rod.

I'm running a #12 in my IPSC Standard with lightened cuts. Admittedly I have not shot it very much so this could change.

Is it a must have for everyone? Nah, the weapon is quite accurate but this refines it. I like gadgets and any mechanical advantage to overcome my lack of practice and dedication...so yes it was worth it for me.

Thanks I'll give that a try when I get it all back together (torn completely down now).

I just got back from the range (blew off an afternoon of work) and the IPSC Standard with the bushing shot quite well. I was using 5.0gr of VV320 behind a Precision Delta 180gr flat point (around 940fps). At 21 yards I was able to put 5 rounds in one of those 3" bullseye "Shoot-n-See" targets. That will be just fine for USPSA. I had a better group with 8.0gr of HS6 behind a Montana Gold 155gr HP but they are too snappy for my taste. Also went down to a 12lb recoil spring with a lightened slide.

I got my back after some FedEx drama but a snow storm and an ice storm has kept me from the range. I can tell it's a tighter lock up "up front" where they installed the bushing. The barrel could use a little tighter lock up at the rear lug but that is no fault of CZ Custom. They also were nice enough to refinish my slide but it will sadly be stripped after I "test" fire it. I'm not sure what distance the test group was shot from, or if it's just a function test, but here it is.....

My two showed up already today. +1 for Top Gun.

That is so awesome...I love those sights too.

TopGun Supply is a top notch vendor. I've always been pleased with their service. I don't mind their two mag policy given the craziness going around.

LOL. I find my CZ is holding up against inflation very well, especially compared to powder, primer, milk and gasoline prices. You want sticker shock look at Sig prices. .....but as you should know or be painfully aware of already, everything seems to be going up in price these days. YMMV Looks like I'll be getting a HAJO now I'm most frustrated with peoples "discovery" of CZ's. I used to pick them up used "for a song". Those days are gone, but I suppose it's good for CZ and CZ custom.

That's very nice.

All it took was a couple lap dances at the "Girls of the Glitter Gulch" and "XS" and John was quite agreeable to the short reset trigger bar.

I don't have your answer, but here's the SAAMI spec. http://www.saami.org/PubResources/CC_Drawings/Pistol/9mm%20Luger%20-%209mm%20Luger%20+P.pdf I haven't touched the chambers on any of my CZs. I've never had any issues.