B_RAD

Hmmm....... I noticed they're not listed in the EAA catalog anymore.

There's another thread here about PV. It's about different colors for different lots. I posted some chrono data.

They come in 1.1# jugs so you actually got 11#.

Sweet!

When Patriot Defense get their guide rods rolling out, that'll save you .5 oz. (I think).

I just got my henning pads yesterday. They weigh .6 oz.

I'm looking forward to really getting into PV. I like hearing you think it's more accrate that TG. I feel TG is more accurate (with my load) than N320. Excited to see if PV gets my preceived accuracy back.

I feel that the PV is softer at the same pf. I'm switching from N320 now. Loaded up my last little bit of N320 last weekend.

Really? I thought V was more comparable to old clays? Has anyone here seen a difference in the new clays vs the older AUS made clays? Clays was my favorite back when I loaded .45. I did use it a little for 9mm as well. I'm stocked up on Prima V. So I won't be buying anything for a while.

It has to be different form USPSA. That's the reasoning.

Ok. Not trying to side track your thread. Just saying.

G34 uses the G17 frame.

Agree with MM. Mine is very shiny! It's not that I'm asking because I want a 2lb trigger. I'm just wondering.

My SA (Lim Pro) is the exact same. I have the same springs you have and have done the same work as you. I don't know how people are getting a lower SA?

I'm just a S&B snob. They seem to be the next best thing to federals. Oh wait,.... scratch that. They suck! Don't buy them! If evyatarts buying them, they'll be as impossible to get as federals.

Tite group does smoke with coated bullets. I think coated lead is gonna smoke nonmatter what but titegroup does seem to smoke a little worse. Is it so so bad that it would ruin your chances at winning? I don't know. I've heard people say it's really only an issue on stages with low sun over a berm. I don't shoot lead anymore. I have loaded BBI with N320. I like that combo.m but don't shoot it anymore.

You know if you haven't loaded the magnumns, you could sell them...... then buy some normal primers. I cut my PD 10# in half and now have a 2# DA pull. I have to pre dent federals to get them to light off but it's so worth it! ha ha. You know there's someone out there cutting coils off a 10# spring trying to get the lowest DA pull possible.

Well, I am a solid C class shooter so!...... kidding. Im D class. Seriosly, I'm actually unclassified. I've only shot two matches. Hope to shoot a lot more this year! And no, I don't do that.

Though,...... I do shoot USPSA too. So, then I'd say "Run and shoot as fast as I can pull the trigger shooting"

Well,... I shoot real life scenario tactical combat shooting! (aka IDPA) So, that's what I say. "Real life scenario tactical combat shooting"

I think a lot of folks have switched to CZ's. I did. Then I switched to Tanfo. Though, I still think glocks are great! But, CZ's and Tanfos might be a little better!...

Got the straight Xtreme trigger. It lowered the DA pull weight by about half a pound. I took it out and put it in twice. Each time I got the same pulls weights. When i put the stock trigger back in the trigger pull was where it was before adding the new trigger. Guessing since it's straighter, I can get my finger a little lower and that provides a little more leverage, which makes for an easier(less weight) pull.

Here's my chrono data. 147 Xtreme @ 1.130" Prima V Lot 16055 Mixed brass S&B primers Tanfo Lim Pro 4.75" polygonal barrel 60 degrees 3.1 gr 10 shot AV 878 Hi 895 Lo 868 ES 27 SD 9 3.1 gr (2nd string) 10 shot AV 880 Hi 888 Lo 864 ES 24 SD 7 3.2 gr 10 shot AV 890 Hi 902 Lo 876 ES 26 SD 10 3.3 gr 10 shot AV 901 Hi 919 Lo 891 ES 28 SD 9

Thanks. Your Tanfo mags it in the 771 for glocks?

Are your limited mags small frame mags?