randy01 Posted January 13, 2008 Share Posted January 13, 2008 This is my reloading / hobby room at my new house. It isn't finished yet, I still have to put up some shelving and other stuff. I've seen this room for real, and it is no way as tidy as in the pictures great set up though There are people that from time to time clean up the mess Link to comment Share on other sites More sharing options...
AZ BP Shootr Posted January 20, 2008 Share Posted January 20, 2008 I'm curious. I saw somewhere on this forum (I thought) plans from NRMA (National Reloading Manufacturers Assoc (I think). In June I mailed a $5 check for the plans and the envelope was returned because they were no longer in business or something like that. Did NRMA go defunct? Does anyone have the full scale plans? Link to comment Share on other sites More sharing options...
RePete Posted January 20, 2008 Share Posted January 20, 2008 This is what you want. http://www.somerssportsmen.com/bench.pdf Link to comment Share on other sites More sharing options...
Front Man Posted January 20, 2008 Share Posted January 20, 2008 Here is what I used; http://www.strongtie.com/products/categori...id-tie_diy.html I made 2, 2' X 8' bences with 3/4 plywood (ripped by my favorite yard) and 2 X 4's. One bench for reloading and one for the Dillon case cleaners and cleaning blasters. The Simpson Strong ties made it a piece of cake. FM Link to comment Share on other sites More sharing options...
AZ BP Shootr Posted January 26, 2008 Share Posted January 26, 2008 This is what you want.http://www.somerssportsmen.com/bench.pdf Thanks Link to comment Share on other sites More sharing options...
AZ BP Shootr Posted January 26, 2008 Share Posted January 26, 2008 Here is what I used; http://www.strongtie.com/products/categori...id-tie_diy.htmlI made 2, 2' X 8' bences with 3/4 plywood (ripped by my favorite yard) and 2 X 4's. One bench for reloading and one for the Dillon case cleaners and cleaning blasters. The Simpson Strong ties made it a piece of cake. FM Thanks to you too. Link to comment Share on other sites More sharing options...
AZ BP Shootr Posted January 26, 2008 Share Posted January 26, 2008 Here is what I used; http://www.strongtie.com/products/categori...id-tie_diy.htmlI made 2, 2' X 8' bences with 3/4 plywood (ripped by my favorite yard) and 2 X 4's. One bench for reloading and one for the Dillon case cleaners and cleaning blasters. The Simpson Strong ties made it a piece of cake. FM Thanks to you too. I made the NRMA bench about 20 years ago but sold it or my ex-wife gave it away. It was very solid. Are these benches sturdy or do you anchor them to the wall for extra stability? Link to comment Share on other sites More sharing options...
Front Man Posted January 26, 2008 Share Posted January 26, 2008 Here is what I used; http://www.strongtie.com/products/categori...id-tie_diy.htmlI made 2, 2' X 8' bences with 3/4 plywood (ripped by my favorite yard) and 2 X 4's. One bench for reloading and one for the Dillon case cleaners and cleaning blasters. The Simpson Strong ties made it a piece of cake. FM Thanks to you too. I made the NRMA bench about 20 years ago but sold it or my ex-wife gave it away. It was very solid. Are these benches sturdy or do you anchor them to the wall for extra stability? Yes they are ridgid. I didn't anchor them to the walls either. The 3/4" plywood holds a lot of wieght in bullets! I have my camera out I'll take some images and post them later tonight. FM Link to comment Share on other sites More sharing options...
KeithB Posted January 26, 2008 Share Posted January 26, 2008 I added the Dillon electronic scales and raised the ballance scales to eye level. The hard cover for the electronic scales got back ordered. Also added a new 5 drawer tool box for storage. Link to comment Share on other sites More sharing options...
Front Man Posted January 28, 2008 Share Posted January 28, 2008 (edited) OK, here are some pics of my bench. After reloading today and thinking about how ridgid I said it was; it would still benefit from anchoring to the wall and maybe some extra lumber below the press it's self. If I ran out of bullets, it may not be heavy enough to not anchor it. Anyway here are the images. FM Edited January 28, 2008 by Front Man Link to comment Share on other sites More sharing options...
Rightbrainer Posted February 7, 2008 Share Posted February 7, 2008 Here's my little slice of heaven. An old Pacific 366 for the skeet loads, a Lyman T-mag turret press for handgun and most rifle stuff and a Pacific single stage for heavy duty. Link to comment Share on other sites More sharing options...
jimmy1 Posted February 17, 2008 Share Posted February 17, 2008 Link to comment Share on other sites More sharing options...
AZ BP Shootr Posted February 17, 2008 Share Posted February 17, 2008 Nice job. Did you go from a set of plans or did you design it yourself? Either way do you know where I might get them? Am I correct to assume that the 4 pullouts are where you attach your reloading bases and you store 2 down below? Thanks, John Link to comment Share on other sites More sharing options...
Angus Hobdell Posted February 17, 2008 Share Posted February 17, 2008 Well here's my reloading room. Still not finished need to make more space for the other 2 1050 and the cam dex. Link to comment Share on other sites More sharing options...
Paul Santiago Posted February 18, 2008 Share Posted February 18, 2008 Well here's my reloading room.Still not finished need to make more space for the other 2 1050 and the cam dex. Link to comment Share on other sites More sharing options...
dajarrel Posted February 18, 2008 Share Posted February 18, 2008 Well here's my reloading room.Still not finished need to make more space for the other 2 1050 and the cam dex. Nice dj Link to comment Share on other sites More sharing options...
NC Shooter Posted February 19, 2008 Share Posted February 19, 2008 (edited) I had to tear down my reloading bench in the guest room when my mother-in-law came to live with us, so now my bench must be portable and is used in my bedroom mostly but could be set up anywhere in a few minutes. I have a Dillon RL550B and two Lymann Spartan single stage presses set up on a Black & Decker Workmate with a top made from two thicknesses of three quarter inch project board glued and screwed together that were cut to 24" X 36". The project board is much stiffer than plywood of the same thickness and it was only $22.00 a 4' X 8' sheet. I attached a piece of 1" X 4" X 24" hardwood to the bottom of the work-top that is clamped by the jaws of the Black & Decker Workmate and the two rear mounting screws of the Dillon strong mount also pass through the hard wood. It is surprisingly stable made more so by adding a shelf underneath where I keep a couple .50 Cal ammo boxes filled with wheel weights. I bought the Black & Decker Workmate for about $50.00 so I have less than $75.00 invested in the bench - it's totally portable - and it works great. This is a great reloading bench idea for any one who is very limited for space or can't bolt thier bench to a wall (like in an appartment). I am going to attempt to add a couple pictures so you can see what I am talking about. Good shooting, and happy reloading. Ken H. Edited February 19, 2008 by NC Shooter Link to comment Share on other sites More sharing options...
NC Shooter Posted February 19, 2008 Share Posted February 19, 2008 One more picture to add. Link to comment Share on other sites More sharing options...
Front Man Posted February 19, 2008 Share Posted February 19, 2008 Well here's my reloading room.Still not finished need to make more space for the other 2 1050 and the cam dex. \ You are really "sluming it" these days Angus! FM Link to comment Share on other sites More sharing options...
AZ BP Shootr Posted February 19, 2008 Share Posted February 19, 2008 Dude, that is awesome. I have seen some really amazing rooms here and some that I really drool over but the ingenuity and simplicity of your solution is brilliant. You threw it in my face that I don't have an excuse and I appreciate that. One question, when you say "project board" do you mean MDF? I would like some more pictures of the details. Thanks, John I had to tear down my reloading bench in the guest room when my mother-in-law came to live with us, so now my bench must be portable and is used in my bedroom mostly but could be set up anywhere in a few minutes. I have a Dillon RL550B and two Lymann Spartan single stage presses set up on a Black & Decker Workmate with a top made from two thicknesses of three quarter inch project board glued and screwed together that were cut to 24" X 36". The project board is much stiffer than plywood of the same thickness and it was only $22.00 a 4' X 8' sheet. I attached a piece of 1" X 4" X 24" hardwood to the bottom of the work-top that is clamped by the jaws of the Black & Decker Workmate and the two rear mounting screws of the Dillon strong mount also pass through the hard wood. It is surprisingly stable made more so by adding a shelf underneath where I keep a couple .50 Cal ammo boxes filled with wheel weights. I bought the Black & Decker Workmate for about $50.00 so I have less than $75.00 invested in the bench - it's totally portable - and it works great. This is a great reloading bench idea for any one who is very limited for space or can't bolt thier bench to a wall (like in an appartment). I am going to attempt to add a couple pictures so you can see what I am talking about. Good shooting, and happy reloading. Ken H. Link to comment Share on other sites More sharing options...
NC Shooter Posted February 19, 2008 Share Posted February 19, 2008 "One question, when you say "project board" do you mean MDF? I would like some more pictures of the details." Being an electrician not a carpenter I have no idea what "MDF" is. They sell it at the local Loews home improvment center to make speaker enclosures and such from (indoor use). It has no wood chips or flakes in it so it's not a particle board material and there are no layers like with regular plywood. but it is heavy and more rigid than three quarter plywood and has a smooth surface. I can take more pictures of the way it clamps to the Workmate, but it might take me a couple days to post them. I used Elmers wood glue spread compleatly over one side of the board mated them together and then drilled five holes spaced in an X pattern from the middle out toward the corners. I used 1/4 - 20 flat head screws and T-nuts countersunk into the board so there would be no raised hardware to get scratched by when moving it around. I will post pictures by Thursday latest. Ken Link to comment Share on other sites More sharing options...
DonT Posted February 19, 2008 Share Posted February 19, 2008 (edited) "One question, when you say "project board" do you mean MDF? I would like some more pictures of the details."Being an electrician not a carpenter I have no idea what "MDF" is. They sell it at the local Loews home improvment center to make speaker enclosures and such from (indoor use). It has no wood chips or flakes in it so it's not a particle board material and there are no layers like with regular plywood. but it is heavy and more rigid than three quarter plywood and has a smooth surface. I can take more pictures of the way it clamps to the Workmate, but it might take me a couple days to post them. I used Elmers wood glue spread compleatly over one side of the board mated them together and then drilled five holes spaced in an X pattern from the middle out toward the corners. I used 1/4 - 20 flat head screws and T-nuts countersunk into the board so there would be no raised hardware to get scratched by when moving it around. I will post pictures by Thursday latest. Ken MDF (medium density fiberboard) Edited February 19, 2008 by DonT Link to comment Share on other sites More sharing options...
NC Shooter Posted February 19, 2008 Share Posted February 19, 2008 Yep, by your description it is most likely MDF. I had thought about putting a sheet of metal in between the two boards before bolting them together but it seems stout enough by itself and the pieces are only 24" X 36" so there is not much length to bow. I'm sure you're right, you would not want to leave standing water on this material. My wife Bought me the RL550B for Christmas so I have not had it set up for very long and have just loaded the first 500 rounds on it over the weekend. I can say though that it is very stable and the checks that I did on the powder measure were also very consistant. Before I got the Dillon I had been using single stage Lymann presses on a combination of particle board and plywood surface that I had C-clamped together and my current arangement is a lot better. It is both stiffer and more stable. Ken Link to comment Share on other sites More sharing options...
Skywalker Posted February 19, 2008 Share Posted February 19, 2008 Oh well, after a lot of work, I've been able to upgrade my reloading room to the following: It's basically a vaulted room carved out in the basement, where I've placed my reloading room and home laboratory, as well as PC station. Link to comment Share on other sites More sharing options...
spook Posted February 19, 2008 Share Posted February 19, 2008 Looking good Luca! I didn't know you liked watching disney movies while reloading Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now