HOGRIDER Posted March 23, 2022 Share Posted March 23, 2022 Just received 1K of the PD Version 1. They look good. Getting ready to measure/weigh a few for consistency. For you shooters that have plenty of experience with the PDs, will they load/run toe-to-toe with the Zero JHPs? Thanks for any details! Link to comment Share on other sites More sharing options...
Sarge Posted March 23, 2022 Share Posted March 23, 2022 14 minutes ago, HOGRIDER said: Just received 1K of the PD Version 1. They look good. Getting ready to measure/weigh a few for consistency. For you shooters that have plenty of experience with the PDs, will they load/run toe-to-toe with the Zero JHPs? Thanks for any details! PD 115 JHP’s run perfectly in my open guns. Link to comment Share on other sites More sharing options...
NoSteel Posted March 23, 2022 Share Posted March 23, 2022 16 minutes ago, HOGRIDER said: Just received 1K of the PD Version 1. They look good. Getting ready to measure/weigh a few for consistency. For you shooters that have plenty of experience with the PDs, will they load/run toe-to-toe with the Zero JHPs? Thanks for any details! I feel they are as good as Zero as well as Montana Gold. Have had no complaints with V1, haven’t tried V2 yet… Link to comment Share on other sites More sharing options...
lroy Posted March 25, 2022 Share Posted March 25, 2022 Maybe I'm a moron, but I've been having a lot of issues with the v2 and my bullet dropper. Been adjusting it for a bit and can't seem to get it to run as well as the v1 due to the profile. Link to comment Share on other sites More sharing options...
NoSteel Posted March 25, 2022 Share Posted March 25, 2022 8 hours ago, lroy said: Maybe I'm a moron, but I've been having a lot of issues with the v2 and my bullet dropper. Been adjusting it for a bit and can't seem to get it to run as well as the v1 due to the profile. Ive had to make adjustment to my MBF when going from The V1 cone shape to other RN profile Bullets in the past. Another reason why I prefer to stick with V1 profile. I’m sure there is a happy mid set up that would work just saw a few upside down I don’t see with the PD V1. Link to comment Share on other sites More sharing options...
1911in9mm Posted March 26, 2022 Share Posted March 26, 2022 It did require a little tinkering to get the Mr. Bullet Feeder to drop the V.2’s at %100 but wasn’t bad. I’ve got mine on a post by itself so I can pull it down to make adjustments on it easily. Instead of trying to reach over the press and make little adjustments. Link to comment Share on other sites More sharing options...
cperazza Posted April 9, 2022 Share Posted April 9, 2022 So I decided to go with the Precision Delta 124 gr v1, since they are closer in shape to the Zero Bullets JHP 125 gr (#136) I am shooting. MTF when I get them. Link to comment Share on other sites More sharing options...
OpenshooterMclass4lyfe Posted April 9, 2022 Share Posted April 9, 2022 All I’ve ever used for my open gun is precision Delta 124jhp v1 I’ve loaded over 15 thousand of these in the last year and had no issues with feeding. They are extremely consistent in weight and diameter. Boringly consistent almost. I cannot recommend the v1 124 jhp enough. The profile allows to load long for my open gun at 1.170 Link to comment Share on other sites More sharing options...
Darrell Posted April 11, 2022 Share Posted April 11, 2022 I shot a match yesterday with 124 V2's in my CZ TSO and My Ruger PCC. OAL was 1.140 and they functioned flawlessly. Took 1st with TSO and 3rd with PCC, this is only the second time I shot my PCC last match I shot it was two years ago. I bought 4K V2's and shot 1K so far in the past month. I've shot over 50K V1's and I'm sticking with V2's. At 25 yards the accuracy is the same, haven't tested to 50 yards since I don't shoot bullseye competition and not wasting primers right now. Link to comment Share on other sites More sharing options...
Boomstick303 Posted April 11, 2022 Share Posted April 11, 2022 26 minutes ago, Darrell said: I shot a match yesterday with 124 V2's in my CZ TSO and My Ruger PCC. OAL was 1.140 and they functioned flawlessly. Thank you for the update. Link to comment Share on other sites More sharing options...
Ssanders224 Posted April 11, 2022 Share Posted April 11, 2022 On 3/22/2022 at 5:07 PM, AHI said: Loose jackets. weigh variations. Like less than 90 gr to slightly over . By now I would hope the issue has been fixed. Haven't opened the replacements. To see. Just don't have time . Did you inform PD of these issues? When did you encounter them? If anything, the new design is (on average) held to a tighter weight tolerance than the "original" due to the equipment and techniques used to manufacture them. Generally speaking, I think most will find that PD holds one of the tightest weight tolerances in the industry. I am only aware of one report of weight issues on the new design since their release, and it was in one of the very first runs of these projectiles. It was due to what we call "short cores" and was an isolated operator error, and not a manufacturing variance. To my knowledge, based on investigation, it was isolated to a couple of boxes of bullets. There have been no other quality issues of note regarding the new design.... And if there has been, they were not reported to PD. Link to comment Share on other sites More sharing options...
costeel Posted April 11, 2022 Share Posted April 11, 2022 Finally got around to testing the v2. No point of impact change. Group size at 10 yds was essentially identical to V1. They fed like grass through a goose. I.e. No resistance at all. Link to comment Share on other sites More sharing options...
AHI Posted April 12, 2022 Share Posted April 12, 2022 (edited) 20 hours ago, Ssanders224 said: Did you inform PD of these issues? When did you encounter them? If anything, the new design is (on average) held to a tighter weight tolerance than the "original" due to the equipment and techniques used to manufacture them. Generally speaking, I think most will find that PD holds one of the tightest weight tolerances in the industry. I am only aware of one report of weight issues on the new design since their release, and it was in one of the very first runs of these projectiles. It was due to what we call "short cores" and was an isolated operator error, and not a manufacturing variance. To my knowledge, based on investigation, it was isolated to a couple of boxes of bullets. There have been no other quality issues of note regarding the new design.... And if there has been, they were not reported to PD. reported , returned, replaced , before they were available to the general public. Edited April 12, 2022 by AHI Link to comment Share on other sites More sharing options...
Ssanders224 Posted April 12, 2022 Share Posted April 12, 2022 2 hours ago, AHI said: reported , returned, replaced , before they were available to the general public. Well there ya go. You are most likely the case I am referring to then. Since their "release" I don't believe there have been any reported quality issues or returns. Link to comment Share on other sites More sharing options...
OpenshooterMclass4lyfe Posted April 12, 2022 Share Posted April 12, 2022 (edited) I’m curious what the v2 was designed for exactly. I like the v1 because of the profile. It allows me to load longer for my open guns and they have treated me great. I wouldn’t use any other projectiles unless I just had to. I’m sure theirs a reason behind the v2 design but I can’t think of it. The profile of it would make me have to load shorter oal I would imagine. Edited April 12, 2022 by OpenshooterAclass4lyfe Link to comment Share on other sites More sharing options...
1911in9mm Posted April 12, 2022 Share Posted April 12, 2022 Solely from my experience, dealing with stock guns with stock barrels, truncated cone bullets have generally loaded shorter than a more traditional round nose. I’m guessing PD designed the V.2 for the stock pistol crowd. Not to make the open class guys rethink their bullet choices. If you’ve got a winner with their V.1 then it’s a non issue, stick with it. No need whatsoever to tinker. But for guys that wanted a more traditional profile for whatever reason, now they have that option. And it’s a pretty dang good one, from one of the best names going. I’m guessing PD didn’t release the V.2 to diminish the V.1’s reputation or sales in any capacity. They released the V.2 to get their share of the market that was seeking a competition quality bullet in a more traditional profile. Smart business makes for good business in my book. Link to comment Share on other sites More sharing options...
OpenshooterMclass4lyfe Posted April 12, 2022 Share Posted April 12, 2022 8 minutes ago, 1911in9mm said: Solely from my experience, dealing with stock guns with stock barrels, truncated cone bullets have generally loaded shorter than a more traditional round nose. I’m guessing PD designed the V.2 for the stock pistol crowd. Not to make the open class guys rethink their bullet choices. If you’ve got a winner with their V.1 then it’s a non issue, stick with it. No need whatsoever to tinker. But for guys that wanted a more traditional profile for whatever reason, now they have that option. And it’s a pretty dang good one, from one of the best names going. I’m guessing PD didn’t release the V.2 to diminish the V.1’s reputation or sales in any capacity. They released the V.2 to get their share of the market that was seeking a competition quality bullet in a more traditional profile. Smart business makes for good business in my book. I guess that makes sense. I never loaded a lot of truncated bullets for my stock guns so I wouldn’t know much about that. PD makes some of the best ones around as far as I’m concerned. I wouldn’t ever use anything else in my open guns. Link to comment Share on other sites More sharing options...
Boomstick303 Posted April 12, 2022 Share Posted April 12, 2022 1 hour ago, OpenshooterAclass4lyfe said: I’m curious what the v2 was designed for exactly. The profile of the nose is definitely different. The V2 is more rounded much like RMR JHP. This leads to better feed for my PCC. PCCs tend to have a minimal feed ramp, if you can call it a feed ramp at all. V1 did not like my PCC, the V2 feed much better. It might allow for shorter OAL without feed issues for various platforms. Maybe @Ssanders224 might have some insight. Link to comment Share on other sites More sharing options...
HOGRIDER Posted April 12, 2022 Share Posted April 12, 2022 Zero also released a 125 JHP Conical to go along with their tried and true 125 JHP. Appears Precision Delta and others are also going down that route to offer a JHP and a "conical" version. "New" Conical: http://www.rozedist.com/mm5/merchant.mvc?Screen=PROD&Store_Code=RZD&Product_Code=R136-A&Category_Code=ZBJ-9MM Original JHP: http://www.rozedist.com/mm5/merchant.mvc?Screen=PROD&Store_Code=RZD&Product_Code=R162-A&Category_Code=ZBJ-9MM I'm definitely liking these PD V1s in 124! Not sure I'd be interested in trying the V2s, but I'm sure they'll also have a following! https://www.precisiondelta.com/compare/124/250 Link to comment Share on other sites More sharing options...
OpenshooterMclass4lyfe Posted April 12, 2022 Share Posted April 12, 2022 1 hour ago, HOGRIDER said: Zero also released a 125 JHP Conical to go along with their tried and true 125 JHP. Appears Precision Delta and others are also going down that route to offer a JHP and a "conical" version. "New" Conical: http://www.rozedist.com/mm5/merchant.mvc?Screen=PROD&Store_Code=RZD&Product_Code=R136-A&Category_Code=ZBJ-9MM Original JHP: http://www.rozedist.com/mm5/merchant.mvc?Screen=PROD&Store_Code=RZD&Product_Code=R162-A&Category_Code=ZBJ-9MM I'm definitely liking these PD V1s in 124! Not sure I'd be interested in trying the V2s, but I'm sure they'll also have a following! https://www.precisiondelta.com/compare/124/250 I’m curious about the v2s. I love the v1s for my open guns. I just wonder how these are better or if they’re better. I’m also curious if I could keep my original oal. I’d wager I would have to go a little shorter. Perhaps these were made more for 38 super comp folks. Link to comment Share on other sites More sharing options...
AHI Posted April 12, 2022 Share Posted April 12, 2022 They seat shorter if you don't change your seating adjustment. There purpose is to feed better in a PCC. Three guys I load ammo for have went back to V1. It's in there heads but they claim that the V2 recoil impulse is slower. They buy the bullets. I just load them up. Link to comment Share on other sites More sharing options...
Boomstick303 Posted April 12, 2022 Share Posted April 12, 2022 9 minutes ago, AHI said: It's in there heads but they claim that the V2 recoil impulse is slower. I find it interesting the things people can notice after the clock goes Beeep! Link to comment Share on other sites More sharing options...
AHI Posted April 12, 2022 Share Posted April 12, 2022 34 minutes ago, Boomstick303 said: I find it interesting the things people can notice after the clock goes Beeep! I agree. Link to comment Share on other sites More sharing options...
Ssanders224 Posted April 13, 2022 Share Posted April 13, 2022 The new design is, for all intents and purposes, an FMJ with no exposed lead base, and the tip of the nose clipped off. It will not perform well terminally (and is not designed to). It is an "everything you need, nothing you don't" approach to competitive/recreational projectiles. The "legacy" 9mm JHP requires extra tooling/processes during the manufacturing process due to how the jacket is drawn and skived, and it gets a slightly thicker jacket material to aid in terminal performance. The new design is also manufactured on more efficient equipment. Due to all of this, at some point when things normalize a little, the new design will offer a more attractive price point to competitors and recreational shooters that need an accurate JHP, but don't need the other features of our "legacy" design. You'd also be surprised how many people have guns that don't like to feed conical, flat nosed projectiles. It's a common complaint, especially with PCC's these days. The new design is "at home" in 38SC and standard 9mm, but we have a ton of 9mm Major shooters using them as well. My standard answer is.... If you are currently using and like the "legacy" JHP, there is probably no reason to experiment with the new design (although we have seen many customers make the switch). However, if you are setting up a new Open gun, PCC, etc. and want to use a JHP, I'd recommend starting with the new design. In the future, when we can open up the delta in price between the two options, the new design will become more attractive as well. Ultimately, every gun/shooter is different, and customers having more options is a good thing. Link to comment Share on other sites More sharing options...
Ssanders224 Posted April 13, 2022 Share Posted April 13, 2022 15 hours ago, AHI said: It's in there heads but they claim that the V2 recoil impulse is slower. Lulz. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now