LLRukus Posted March 22, 2018 Share Posted March 22, 2018 anyone with suggestions on powder to use with 147 gr for an open gun? Link to comment Share on other sites More sharing options...
tcazes Posted March 22, 2018 Share Posted March 22, 2018 (edited) I don't know anyone that runs 147 but for 124 and 115 like everyone else hs6, auto comp (my favorite), 3n38, silhouette, e3, Edited March 22, 2018 by tcazes Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted March 22, 2018 Share Posted March 22, 2018 5 hours ago, tcazes said: 3n36 Probably 3n38 ? Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted March 22, 2018 Share Posted March 22, 2018 7 hours ago, LLRukus said: powder to use with 147 gr for an open gun? Most people find that using lighter bullets enables them to use MORE powder, which produces MORE gas, which makes the compensator work "better". Been reading about a gun club here on BE that is using 147 gr bullets in OPEN guns, but not sure what the advantage is ??? Link to comment Share on other sites More sharing options...
tcazes Posted March 22, 2018 Share Posted March 22, 2018 6 hours ago, Hi-Power Jack said: Probably 3n38 ? Yea that. Sorry lol! Link to comment Share on other sites More sharing options...
echotango Posted March 22, 2018 Share Posted March 22, 2018 (edited) The open shooters here are using CFE w/147's. Edited March 22, 2018 by echotango Link to comment Share on other sites More sharing options...
chevrofreak Posted March 23, 2018 Share Posted March 23, 2018 I've shot a 147gr RMR hardcore match over 6.6gr of HS-6 at 1.160", but it wasnt enjoyable Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted March 23, 2018 Share Posted March 23, 2018 11 hours ago, chevrofreak said: I've shot a 147gr RMR hardcore match over 6.6gr of HS-6 at 1.160", but it wasnt enjoyable Why not ? Were 124 gr bullets more enjoyable ? Link to comment Share on other sites More sharing options...
edwin garcia Posted March 23, 2018 Share Posted March 23, 2018 VV 3N38, N105, Maybe N350? Like most said here, it's not a common bullet weight for open but I have heard/seen people use it in Open. 38 super or 9? major/minor? I would keep an eye on excessive pressure signs just to be safe. Best of luck Link to comment Share on other sites More sharing options...
mwray Posted March 23, 2018 Share Posted March 23, 2018 I had considered trying 147’s when I shot open. Then the more I thought about it the more it sounded like an explosion and a killed gun. So I gave up on it Link to comment Share on other sites More sharing options...
tcazes Posted March 23, 2018 Share Posted March 23, 2018 (edited) I just don't see any benefit. I want the most gas I can get to run the comp. That usually means pushing a bullet pretty fast. You can't push 147s fast. I mean you can but it's not a good idea Edited March 23, 2018 by tcazes Link to comment Share on other sites More sharing options...
zzt Posted March 23, 2018 Share Posted March 23, 2018 You most definitely do not want to use e3 to make major in an open gun. The majority of open shooters use a 124gr bullet. 115gr is next in popularity. Everything else is a blip. If you can load long and use 3N38, your pressure will be in the +P range. It will be higher with HS-6, and higher still with WAC and Silhouette. Link to comment Share on other sites More sharing options...
chevrofreak Posted March 23, 2018 Share Posted March 23, 2018 8 hours ago, Hi-Power Jack said: Why not ? Were 124 gr bullets more enjoyable ? Very sharp recoil. 124's and 115's are softer feeling to me. I run 115's almost exclusively now. I've seen people talk about "the dot not leaving the window" and thought it was total BS. That was, until I tried 10.5gr of AA7 behind a 115gr JHP. Link to comment Share on other sites More sharing options...
superdude Posted March 23, 2018 Share Posted March 23, 2018 6 hours ago, mwray said: I had considered trying 147’s when I shot open. Then the more I thought about it the more it sounded like an explosion and a killed gun. So I gave up on it What would cause the explosion? 4 hours ago, tcazes said: I just don't see any benefit. I want the most gas I can get to run the comp. That usually means pushing a bullet pretty fast. You can't push 147s fast. I mean you can but it's not a good idea Why is it not a good idea to push 147 grain bullets fast? Link to comment Share on other sites More sharing options...
mwray Posted March 23, 2018 Share Posted March 23, 2018 Why is it not a good idea to push 147 grain bullets fast?Well let’s take into consideration that the round needs to be around 1.165” to feed well. How much case capacity does that leave you? I was thinking somewhere around 7 grains. So then compressing a slow powder may not get you to major PF. Then you would need a faster powder. Now you’re playing with fire Link to comment Share on other sites More sharing options...
mwray Posted March 23, 2018 Share Posted March 23, 2018 Well let’s take into consideration that the round needs to be around 1.165” to feed well. How much case capacity does that leave you? I was thinking somewhere around 7 grains. So then compressing a slow powder may not get you to major PF. Then you would need a faster powder. Now you’re playing with fire. Also fast burning powders don’t make enough gas to fuel a comp. Link to comment Share on other sites More sharing options...
superdude Posted March 24, 2018 Share Posted March 24, 2018 (edited) 46 minutes ago, mwray said: 47 minutes ago, mwray said: Well let’s take into consideration that the round needs to be around 1.165” to feed well. How much case capacity does that leave you? I was thinking somewhere around 7 grains. So then compressing a slow powder may not get you to major PF. Then you would need a faster powder. Now you’re playing with fire. Also fast burning powders don’t make enough gas to fuel a comp. In general, heavier bullets tend to achieve a higher power factor when pushed to the same pressure as lighter bullets. In other words, when pushed to the same power factor, heavier bullets can do so at lower pressure. Heavier bullets are generally best pushed with slower powders. There's no need for a faster powder. There is plenty of space for the powder. People get paranoid about the case capacity in 9mm with heavy bullets. There's no need to. This seems to be a internet/gunstore myth. Sure, heavier (longer) bullets reduce remaining case capacity, but they don't require as much powder as lighter (shorter) bullets and this takes up less space in the case. It's a non-issue from what I can see at the present. Take a look at the maximum loads for 9mm Luger in loading manuals for the various bullet weights and do the math. The heavier bullets are producing a higher power factor, and they're doing it with (usually) slower powders. Forgot to add this: https://atlantaarms.com/products/9mm-major-147gr-jhp-elite.html Edited March 24, 2018 by superdude Link to comment Share on other sites More sharing options...
mwray Posted March 24, 2018 Share Posted March 24, 2018 In general, heavier bullets tend to achieve a higher power factor when pushed to the same pressure as lighter bullets. In other words, when pushed to the same power factor, heavier bullets can do so at lower pressure. Heavier bullets are generally best pushed with slower powders. There's no need for a faster powder. There is plenty of space for the powder. People get paranoid about the case capacity in 9mm with heavy bullets. There's no need to. This seems to be a internet/gunstore myth. Sure, heavier (longer) bullets reduce remaining case capacity, but they don't require as much powder as lighter (shorter) bullets and this takes up less space in the case. It's a non-issue from what I can see at the present. Take a look at the maximum loads for 9mm Luger in loading manuals for the various bullet weights and do the math. The heavier bullets are producing a higher power factor, and they're doing it with (usually) slower powders. Forgot to add this: https://atlantaarms.com/products/9mm-major-147gr-jhp-elite.htmlSpeaking of math 147 bullets cost way more per thousand than 115’s so if you are wanting to waste money just buy new lapua 9mm brass and run 115’s safely Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted March 24, 2018 Share Posted March 24, 2018 27 minutes ago, superdude said: Heavier bullets are generally best pushed with slower powders. There's no need for a faster powder. That's contrary to everything I've read and experienced. I like heavy (147 gr) bullets in 9mm Minor with a FAST Powder - And, I've read that heavy .40 Major bullets with Fast powder is The Way to Go .... I use the slow powders for 9mm Major in Open, with a comp. Link to comment Share on other sites More sharing options...
superdude Posted March 24, 2018 Share Posted March 24, 2018 There is a big distinction between loading for a non-compensated gun and a compensated gun when trying to reach power factor for competition. The rules of thumb are opposite. non-compensated gun: for the same power factor, heavy bullet with fast powders for the lowest/softest recoil. compensated gun: for the same power factor, light bullets with slow powders for the lowest muzzle rise. general reloading: check a loading manual and there is a trend for fast powders pushing light bullets to their highest speed, and slow powders pushing heavy bullets to their highest speed. (And there will always be exceptions.) And, the heavier bullets tend to reach a higher power factor in general, as noted in previous post. This is what I was alluding to - given the thread title and discussion - sorry for any confusion. Link to comment Share on other sites More sharing options...
mwray Posted March 24, 2018 Share Posted March 24, 2018 Just go ahead and try the 147’s for major PF. But please let us know if your results. Please wear a leather glove for testing Link to comment Share on other sites More sharing options...
echotango Posted March 24, 2018 Share Posted March 24, 2018 I have shot 147's with CFE at major pf. I didn't care for the feel. Some here shoot it every week. Nothing to be scared of. Link to comment Share on other sites More sharing options...
Gooldylocks Posted March 24, 2018 Share Posted March 24, 2018 I wouldn't be afraid of it blowing up for any reason, but I would use slow powder. HS6 or slower. HS6 and load as long as your throat will allow maybe? AA7? 3n38? 1.18"+? Link to comment Share on other sites More sharing options...
mlmiller1 Posted March 25, 2018 Share Posted March 25, 2018 Just a hypothetical thought but thinking physics.... a 147gr bullet has about 1/3 more mass than 115. How much more energy does it take to move that much more mass? All that energy must be built up in the chamber before the bullet ever starts to move. Then due to friction of the bullet in rifling, how much more energy(pressure) does it take to get to the velocity you need? Of course time is also a consideration but you have to do all this before bullet leaves the barrel. It seems that since energy in this case is directly related to pressure & time, you would be building considerably more pressure than what would be needed for a 115gr bullet. In a 9mm where trying to make major power factor is already fairly high pressure, this might warrant some thought..... Link to comment Share on other sites More sharing options...
IHAVEGAS Posted March 25, 2018 Share Posted March 25, 2018 21 minutes ago, mlmiller1 said: Just a hypothetical thought but thinking physics.... a 147gr bullet has about 1/3 more mass than 115. How much more energy does it take to move that much more mass? All that energy must be built up in the chamber before the bullet ever starts to move. Then due to friction of the bullet in rifling, how much more energy(pressure) does it take to get to the velocity you need? Of course time is also a consideration but you have to do all this before bullet leaves the barrel. It seems that since energy in this case is directly related to pressure & time, you would be building considerably more pressure than what would be needed for a 115gr bullet. In a 9mm where trying to make major power factor is already fairly high pressure, this might warrant some thought..... Kinetic energy = 1/2 * mass * velocity * velocity When you crunch the numbers at constant power factor it works out differently than intuition would suggest. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now