yigal Posted September 19, 2017 Share Posted September 19, 2017 yes .most of them have good trigger out of the box 700-1200 grams . ( compare to other guns ) but its not perfect and needs good gunsmithig job. you can get easy smooth and sharp trigger under 600 g and travel of 2 - 2.5 mm at the lowest point of the trigger. if you want by tso check them carefully , and pray its not assembled in mondays . Link to comment Share on other sites More sharing options...
bulm540 Posted September 19, 2017 Share Posted September 19, 2017 3 hours ago, yigal said: yes .most of them have good trigger out of the box 700-1200 grams . ( compare to other guns ) but its not perfect and needs good gunsmithig job. you can get easy smooth and sharp trigger under 600 g and travel of 2 - 2.5 mm at the lowest point of the trigger. if you want by tso check them carefully , and pray its not assembled in mondays . Guy said his was stock. Cleaned it out of the box and shot it. Link to comment Share on other sites More sharing options...
yigal Posted September 19, 2017 Share Posted September 19, 2017 37 minutes ago, bulm540 said: Guy said his was stock. Cleaned it out of the box and shot it. yes .its working right out of the box. its very reliable handgun . sometimes they have problems with original tso magazines in cal. 9mm. nobody is perfect. Link to comment Share on other sites More sharing options...
bulm540 Posted September 19, 2017 Share Posted September 19, 2017 If I was not shooting an STI, this would be my limited gun. Link to comment Share on other sites More sharing options...
bulm540 Posted September 19, 2017 Share Posted September 19, 2017 8 minutes ago, yigal said: yes .its working right out of the box. its very reliable handgun . sometimes they have problems with original tso magazines in cal. 9mm. nobody is perfect. His was a 40. Link to comment Share on other sites More sharing options...
Woody3025 Posted September 25, 2017 Share Posted September 25, 2017 I see that NERD is making a holster for CZ now, I personally don't have one but the 2011 guys I know that have them swear by them for 3 gun. If somebody has one what are your thoughts. Link to comment Share on other sites More sharing options...
IDescribe Posted September 28, 2017 Share Posted September 28, 2017 On 9/17/2017 at 3:19 PM, muncie21 said: It's all part of the game. The problem seems pretty obvious. There's a mass imbalance creating some torque on recoil, opening up the friction fits. You can fix that by evenly redistributing your bracelets between both arms. Link to comment Share on other sites More sharing options...
muncie21 Posted September 28, 2017 Share Posted September 28, 2017 1 hour ago, IDescribe said: The problem seems pretty obvious. There's a mass imbalance creating some torque on recoil, opening up the friction fits. You can fix that by evenly redistributing your bracelets between both arms. The bracelets provide equilibrium of mass. Shifting even 1 of them to my strong hand would clearly impact point of aim. Link to comment Share on other sites More sharing options...
bemanuel Posted October 6, 2017 Share Posted October 6, 2017 (edited) I have a TSO 40 S&W. Magazines drop freely empty but do not when loaded with 6 or more rounds. I see wear on the side of the magazines and they appear to be hanging just prior to clearing on both sides against the bottom of the magwell opening. Any ideas? Edited October 6, 2017 by bemanuel Link to comment Share on other sites More sharing options...
chrisstophere Posted October 6, 2017 Share Posted October 6, 2017 I have a TSO 40 S&W. Magazines drop freely empty but do not when loaded with 6 or more rounds. I see wear on the side of the magazines an they appear to be hanging just prior to clearing on both sides against the bottom of the magwell opening. Any ideas?I had to pinch mine with some channel locks while fully loaded. Just pinch a little at a time. Sent from my SM-N950U using Tapatalk Link to comment Share on other sites More sharing options...
Croe Posted October 6, 2017 Share Posted October 6, 2017 24 minutes ago, chrisstophere said: I had to pinch mine with some channel locks while fully loaded. Just pinch a little at a time. Sent from my SM-N950U using Tapatalk Same problem, where do you pinch them? Middle? Sides?Edges? thanks Link to comment Share on other sites More sharing options...
chrisstophere Posted October 6, 2017 Share Posted October 6, 2017 Same problem, where do you pinch them? Middle? Sides?Edges? thanksAbout the middle on the sides. Remove the slide, load a full mag and hit the mag release. See where it catches by looking down from the top. Pinch it at that spot. Do it in small steps around that area until it does freely, with no resistance. Edit. Not the edges on the front strap and back strap. The grip panel sides. Link to comment Share on other sites More sharing options...
chrisstophere Posted October 6, 2017 Share Posted October 6, 2017 About the middle on the sides. Remove the slide, load a full mag and hit the mag release. See where it catches by looking down from the top. Pinch it at that spot. Do it in small steps around that area until it does freely, with no resistance. Edit. Not the edges on the front strap and back strap. The grip panel sides. I forgot to say pinch it on the hell panel sides, not the front and back strap sides. Sent from my SM-N950U using Tapatalk Link to comment Share on other sites More sharing options...
bemanuel Posted October 6, 2017 Share Posted October 6, 2017 11 hours ago, chrisstophere said: I forgot to say pinch it on the hell panel sides, not the front and back strap sides. Sent from my SM-N950U using Tapatalk Thanks for the information! I did lightly sand the bottom of the magwell with some 600 grit and oil before I saw your post. It is definitely better. Going to see how that works tomorrow during USPSA match. If I still have problems will work on magazines. Link to comment Share on other sites More sharing options...
mktt89 Posted October 7, 2017 Share Posted October 7, 2017 My magwell was over tighten i loosened it snd all is well Link to comment Share on other sites More sharing options...
mktt89 Posted October 7, 2017 Share Posted October 7, 2017 Does anyone have the shadow 2 extended safety in stock Link to comment Share on other sites More sharing options...
reballz Posted October 10, 2017 Share Posted October 10, 2017 Kydex: Red Hill Tactical is the only one I know that has a TSO moldhttp://m.imgur.com/a/41Vv3 Race holsters: DAA has a TSO specific block (alpha x is getting good reviews), Ghost SP01 block works (I have The One and it is secure but wiggles and has worn paint off the trigger guard to bare metal)I have the alpha x..... love it!Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
bemanuel Posted October 10, 2017 Share Posted October 10, 2017 On 10/6/2017 at 10:34 AM, bemanuel said: Thanks for the information! I did lightly sand the bottom of the magwell with some 600 grit and oil before I saw your post. It is definitely better. Going to see how that works tomorrow during USPSA match. If I still have problems will work on magazines. Follow-Up. No issues during match. Seemed to have done the trick! Link to comment Share on other sites More sharing options...
chrisstophere Posted October 10, 2017 Share Posted October 10, 2017 Follow-Up. No issues during match. Seemed to have done the trick!That's awesome to hear. I was thinking when I when your first reply that if you were going to have to strip a mag during a course, that's going to suck. Link to comment Share on other sites More sharing options...
pistolshot Posted October 10, 2017 Share Posted October 10, 2017 (edited) Hey guys, I am consistently getting failure to feed now with my .40 orange. Nothing has changed except I put in the OEM spring from a 13lbs spring. I even put the 13lbs sping back in and it is still happening. Basically the bullet gets stuck on the feed ramp and the slide stays open, I can push down on the bullet and it will go into the barrel and the slide will close but once it happens, it will happen again and again. I don't think it is mag specific as it's random when it happens but my last 3 IPSC matches have been ruined with a low score due to me always having this issue. Not sure what can be done to fix this. The gun ran pretty much fine until this started happening and the ammo is the same and even if I use factory ammo does it happen. I have done some testing and sometimes if I slam the mag in, it happens so like the mag is too far in? Can that happen? Other time I don't slam the mag in and it doesn't happen. Any suggestions? Thanks Edited October 10, 2017 by pistolshot Link to comment Share on other sites More sharing options...
yigal Posted October 10, 2017 Share Posted October 10, 2017 don't worry it's only metal everything can be repaired. check extractor that is ok. sometimes there are small fractures on its edge. (on used) are u right or left shooter ? in few tso that i saw reversed mag release can make the difference. and check feed ramp that its still have mirror smooth surface. found on few tso changes on feed ramp after 3000 rounds how many rounds it shot? most tso that we use have factory 16lb rs .9 and 40. only few use 12lb in 9mm Link to comment Share on other sites More sharing options...
selecw Posted October 10, 2017 Share Posted October 10, 2017 On 9/3/2017 at 12:46 PM, DTO said: Has anyone found a holster option other than the Red Hill Tactical? Suomi ASE - excellent Link to comment Share on other sites More sharing options...
yigal Posted October 10, 2017 Share Posted October 10, 2017 3 minutes ago, selecw said: Suomi ASE - excellent this one? remind me magnetic indicator stand for milling machine Link to comment Share on other sites More sharing options...
bemanuel Posted October 10, 2017 Share Posted October 10, 2017 26 minutes ago, selecw said: Suomi ASE - excellent I use a double alpha race master. They have a tso specific insert. Noticing some wear on bottom of trigger guard. Link to comment Share on other sites More sharing options...
yigal Posted October 10, 2017 Share Posted October 10, 2017 (edited) 51 minutes ago, bemanuel said: I use a double alpha race master. They have a tso specific insert. Noticing some wear on bottom of trigger guard. all shooters that use daa holsters damaged tso and shadow trigger guard finish. and gun has big ply inside holster. not mention about that every competition few locked guns falls from it. and few stacked inside the holster. bad copy. never try no sr speed no daa and not ghost herd good things about g .rivas but never saw it. Edited October 10, 2017 by yigal Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now