3gunDQ Posted October 10, 2016 Share Posted October 10, 2016 Anybody running a custom left side charger on an ar 9? I am considering having one installed but since the 9 is not a gas gun I am wondering what issues arise from it? If you have a custom left side charger please post pics. Link to comment
pfcchambers Posted October 10, 2016 Share Posted October 10, 2016 Matrix arms makes a AR-9 side charger. Works with standard bcg. Liking mine so far. Link to comment
Corey Posted October 10, 2016 Share Posted October 10, 2016 I have the Matrix as does a shooting buddy of mine. His is awesome and I'm hoping mine is too once I get shooting it, lol. Link to comment
3gunDQ Posted October 10, 2016 Author Share Posted October 10, 2016 I am more concerned with adding one to the gun I already have... I am guessing it can go higher and not require a bolt catch mod due to the lack of gas operation. Link to comment
BD Williamson Posted October 21, 2016 Share Posted October 21, 2016 Gibbz makes an awesome side charger Located in Mesa Link to comment
Steve RA Posted October 21, 2016 Share Posted October 21, 2016 (edited) Edited October 21, 2016 by Steve RA Link to comment
Steve RA Posted October 21, 2016 Share Posted October 21, 2016 That is an LAR - can't get anymore since Remington bought LAR - but several other companies make an almost identical one. Works very well. Link to comment
bwikel Posted October 23, 2016 Share Posted October 23, 2016 The Gibbz and NFA side charging uppers require a special cam pin that can't be swapped out in a 9mm bcg. I guess you could drill the bcg and permanently attach the cam pin. Link to comment
MHitchcock Posted October 26, 2016 Share Posted October 26, 2016 Can always get a JP PSC-11 upper Link to comment
Baltimoreed Posted January 8, 2018 Share Posted January 8, 2018 Or you could build your own. I've got bum elbows so I wanted a charger on the handguard not on the upper. I used the gas tube hole in the upper to run my drill rod through. It does not travel with the bolt and has a spring to return it forward. There is a small bearing that rides in the square channel on top of the handguard which keeps an aluminum block from rubbing the handguard. I removed several divisions between the handguard slots to allow the unit to move. The part that goes around the bbl is steel, everything else is aluminum. It works great. Link to comment
mpeltier Posted January 8, 2018 Share Posted January 8, 2018 On 10/23/2016 at 5:45 PM, bwikel said: The Gibbz and NFA side charging uppers require a special cam pin that can't be swapped out in a 9mm bcg. I guess you could drill the bcg and permanently attach the cam pin. Thats not entirely true. At least with the NFA. The 9mm side charger does not use a special cam pin. Only their AR15 and AR10 side chargers do. The 9mm version will work with almost any bolt for 9mm. Im not familiar with how the Gibbz works. Link to comment
bwikel Posted January 8, 2018 Share Posted January 8, 2018 You are correct the Gibbz and NFA side chargers will work off the fake gas key. The cam pin just keeps the bolt from rotating in an AR15 so since blowbacks don't have a rotating bolt the cam pin is not needed. Link to comment
L9X25 Posted January 8, 2018 Share Posted January 8, 2018 (edited) 1 hour ago, mpeltier said: Thats not entirely true. At least with the NFA. The 9mm side charger does not use a special cam pin. Only their AR15 and AR10 side chargers do. The 9mm version will work with almost any bolt for 9mm. Im not familiar with how the Gibbz works. +1 My NFA upper works fine with my Taccom bolt, just they way they both came from the factory. No modifications at all. The side charger works great and you get a functioning LRBHO thrown in for free, for those that want that. The side charger contacts that flat area in front of the gas block, it does not touch the gas block or alignment dingus that Taccom has in place of a gas block. Edited January 8, 2018 by L9X25 Link to comment
muncie21 Posted January 10, 2018 Share Posted January 10, 2018 On 1/8/2018 at 2:36 PM, Baltimoreed said: Or you could build your own. I've got bum elbows so I wanted a charger on the handguard not on the upper. I used the gas tube hole in the upper to run my drill rod through. It does not travel with the bolt and has a spring to return it forward. There is a small bearing that rides in the square channel on top of the handguard which keeps an aluminum block from rubbing the handguard. I removed several divisions between the handguard slots to allow the unit to move. The part that goes around the bbl is steel, everything else is aluminum. It works great. Interesting design concept you developed! Care to share any additional pics of this setup? Link to comment
Baltimoreed Posted January 10, 2018 Share Posted January 10, 2018 (edited) Here's what it looks like from the top. You can see the aluminum block with the small bearing, drill rod and return spring. The silver aluminum piece is only a shroud around the bbls muzzle which acts as a forward stop. But I could have used the slots in the forarm as a stop. The piece that wraps around the bbl is steel, the hook is aluminum. The drill rod goes into a modified gas key on the bolt. I have enough rearward movement to eject a live .45 acp round. The Oly wire ejector is mounted in the upper. I alumahyded the parts black. One of my better ideas. Edited January 10, 2018 by Baltimoreed Link to comment
Baltimoreed Posted January 10, 2018 Share Posted January 10, 2018 (edited) Here's another view. I also have a short video on Utube under AR.45 forward charging handle. The blued piece is a piece of 1897 winchester shotgun bbl but I've since replaced that with a piece of aluminum thickwall tubing. Edited January 11, 2018 by Baltimoreed Link to comment
Thatsme Posted January 10, 2018 Share Posted January 10, 2018 got a buddy that cut up an upper to make his a side charger. It runs great however you gotta be careful of the charging handle flying back and forth Link to comment
Baltimoreed Posted January 10, 2018 Share Posted January 10, 2018 (edited) The forward charger on the AR.45-MP5 was more complicated due to the rotation of the cocking piece where it locks on the charging tube. I had to use a flat bearing to allow the front part to rotate while the rear stayed aligned with the gas key. The drill rod had to be offset to go through the gas tube hole. Edited January 10, 2018 by Baltimoreed Link to comment
muncie21 Posted January 10, 2018 Share Posted January 10, 2018 Nice bit of design/engineering @Baltimoreed! I like the simplicity and design of the AR9mm charging handle. I might try to mimic that on my PCC when I've got more spare time. Link to comment
bladewurk Posted January 11, 2018 Share Posted January 11, 2018 Foxtrot Mike FM-9 complete upper works great and good value Link to comment
myn0ck Posted January 11, 2018 Share Posted January 11, 2018 On 10/23/2016 at 5:45 PM, bwikel said: The Gibbz and NFA side charging uppers require a special cam pin that can't be swapped out in a 9mm bcg. I guess you could drill the bcg and permanently attach the cam pin. I'm pretty sure the Gibbz website did say that at one point, but after I asked a question on that point it was no longer to be found! What Gibbz said was this applies to their G4 uppers, but not their G9. Also QC10 has one based off Gibbz. Link to comment
Screaminyz Posted January 14, 2018 Share Posted January 14, 2018 NFA makes 2 different side charger uppers. One for 9mm and one for AR15-223. Joe Bobs sells them as Spartan side chargers and they are identical and usually cheaper. My Spartan side charger has been trouble free and is very top notch. I haven’t put a ton of rounds through it yet but all the reviews I’ve read say it will last a long time.Sent from my iPhone using Tapatalk Link to comment
L9X25 Posted January 14, 2018 Share Posted January 14, 2018 I've been shooting my NFA for a while now and have had no problems, and it looks/feels pretty durable. All that I did was replace the detent spring with something lighter and that made the function much smoother. With the factory spring it feels somewhat notchy to start cycling the bolt. Link to comment
Boxer1 Posted January 23, 2018 Share Posted January 23, 2018 I have had great luck with the Gibbz with the extended handle and a JP bolt. I did do the silent capture and had to change springs on that to get it to run my reloads reliable but now it shoots great. It is a heavier gun with the EoTech and full barrel. COmpared to my Taccom and Aimpoint micro gun. I enjoy shooting them both and both have their strong and weak points. Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now