cerealbyter Posted May 16, 2016 Share Posted May 16, 2016 I've got a Benelli M2 that currently has a 28in barrel but looking to get a 26in barrel next week. Should I go with a +7 tube or +9 tube for 3gun? Link to comment Share on other sites More sharing options...
dapribek Posted May 16, 2016 Share Posted May 16, 2016 I would think +9 would be a real advantage. Link to comment Share on other sites More sharing options...
Snopczynski Posted May 16, 2016 Share Posted May 16, 2016 I'm not familiar with the factory round count for an M2, but I would go with the tube that would give you 12 round capacity in the tube, +1 in the chamber. Its always nice to be able to throw a quick Quad at the buzzer if you need to. Link to comment Share on other sites More sharing options...
racknrider Posted May 16, 2016 Share Posted May 16, 2016 With a +9 the tube is still longer than a 28" barrel, what's the advantage of going to 26"? I'm honestly curious as I have a 28" barrel gun. Link to comment Share on other sites More sharing options...
Vespid_Wasp Posted May 16, 2016 Share Posted May 16, 2016 (edited) I'm not familiar with the factory round count for an M2, but I would go with the tube that would give you 12 round capacity in the tube, +1 in the chamber. Its always nice to be able to throw a quick Quad at the buzzer if you need to. Exactly this. If there is the possibility for movement from the time you pickup your gun to the time you take your first shot, it is really nice to be able to throw in a quad. It also removes limitations on when you can load 4 or load 8 as you move through a stage, and eliminates some of the barriers on stage planning. I have shot a few stages where match directors put in some cramped walls and shooting ports that make a longer shotgun a little tricky to navigate, but I have also shot some big shotgun woods walk stages where you might shoot 30+ shells and freedom to load is nice. If I were you I would stick with the 28 inch barrel though. Weight difference will be negligible, and a 28 will be closer to flush with a 12 round tube. Not much gain for the cost of a new Benelli barrel. Edited May 16, 2016 by Vespid_Wasp Link to comment Share on other sites More sharing options...
cerealbyter Posted May 16, 2016 Author Share Posted May 16, 2016 So +9 it is. Thanks for the input. I was thinking 24 or 26 initially because that was the suggestions I got. I just happened to find a new M2 with a 28" barrel for 800, so I grabbed it. Link to comment Share on other sites More sharing options...
jswhitesell619 Posted May 16, 2016 Share Posted May 16, 2016 You got a heck of a deal! I just purchased my 26" gun for $1100 and was happy. My plan is to purchase a plus 7 tube, and purchase the shooters source +2 end cap. I am only loading two at the moment but will be practicing quads when my gun comes back from Accurate Iron. Mike also suggested that route, but didn't specify as to why but I trust his opinion whole heartedly! Link to comment Share on other sites More sharing options...
kmca Posted May 17, 2016 Share Posted May 17, 2016 So +9 it is. Thanks for the input. I was thinking 24 or 26 initially because that was the suggestions I got. I just happened to find a new M2 with a 28" barrel for 800, so I grabbed it. Just be careful if you happen to live in one of the restricted states Link to comment Share on other sites More sharing options...
freshrider Posted May 17, 2016 Share Posted May 17, 2016 12 round tube and you can throw a quad load in after the beep. That seems to be what most people run. More capacity = more stage plan flexibility. I find that 14 is not really much more difficult to handle than 12, so I run a 14 round tube. Link to comment Share on other sites More sharing options...
dlightning Posted May 17, 2016 Share Posted May 17, 2016 What division? Link to comment Share on other sites More sharing options...
Snopczynski Posted May 17, 2016 Share Posted May 17, 2016 The advantage to a 26" gun is a tiny bit less weight, and shorter guns point quicker. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
cerealbyter Posted May 17, 2016 Author Share Posted May 17, 2016 So +9 it is. Thanks for the input. I was thinking 24 or 26 initially because that was the suggestions I got. I just happened to find a new M2 with a 28" barrel for 800, so I grabbed it. Just be careful if you happen to live in one of the restricted states I live in Georgia these days. I moved from CA about 2 years ago. Link to comment Share on other sites More sharing options...
cerealbyter Posted May 17, 2016 Author Share Posted May 17, 2016 The advantage to a 26" gun is a tiny bit less weight, and shorter guns point quicker. Sent from my iPhone using Tapatalk That's why my friends were suggesting 24 or 26 as ideal lengths. I guess I'll run the 28 until I see a noticeable disadvantage. Who knows? I may like the 28. Link to comment Share on other sites More sharing options...
Snopczynski Posted May 20, 2016 Share Posted May 20, 2016 Give it a whirl and see! Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
crossgun Posted May 21, 2016 Share Posted May 21, 2016 I'm having Steve at RAS build me a shotgun with some options. The mag tube will hold 10 total as I really don't want that much tube forward of the 24" barrel. If needed I could screw on a plus 2 to add 4 rounds. He is also having a plug made to limit the 10 round tube to a MAX of 8 rounds, Seeing I'm not sure what the correct answer to this is riddle is I figure options are always the best. Link to comment Share on other sites More sharing options...
gnhowell1 Posted May 21, 2016 Share Posted May 21, 2016 At least a 12 round tube and possibly a 13/14 if it's not to unwieldy. I used to run a 12 but went to a 14 as match directors figured out everyone was going to 12 so they put 13 or 14 round arrays in the stage. With a max of 15 in the gun I can knock out most array's without a standing reload. My 24" Beretta with a 14 round tube is about perfect. Just take off the +2 cap when I need to get a little more compact. Link to comment Share on other sites More sharing options...
WhiteDingo Posted May 22, 2016 Share Posted May 22, 2016 If you do end up deciding to go with a shorter barrel, an alternative is to send the barrel to Briley and have them shorten it and re-thread; it'll save you a couple hundred bucks. Link to comment Share on other sites More sharing options...
Bushy24 Posted May 30, 2016 Share Posted May 30, 2016 I have the 24" 9+1 JM Pro. 5 in the tube with a +4 Nordic Extension. I could buy a plus 3 or 5 from Nordic, but its cheaper to buy a one piece extension onto the oem tube. I was kicking around replacing it with a Nordic +7 or +9. What are your thoughts? Link to comment Share on other sites More sharing options...
dogtired Posted May 30, 2016 Share Posted May 30, 2016 What division? This of course is pertinent. Link to comment Share on other sites More sharing options...
Bushy24 Posted May 30, 2016 Share Posted May 30, 2016 Tac ops or open. I've only competed in a few three gun competitions so far and I went open. I heard the JM can have feed issues past 12 total rounds in the tube? But mine is a new one. The tube would obviously be extended past the barrel on either set up. I wonder what the swing/comfort/speed/safety of that extra extension would be like too? Link to comment Share on other sites More sharing options...
kurtm Posted May 30, 2016 Share Posted May 30, 2016 And now for a Teaspoon of sand thrown at the ocean.....you just don't need a fence pole length tube. I know of at least 3 real good 3-gunners that are always in the top ten who run 8-9 round tubes. I have never used over a 9 round tube, and I still seem to do OK, and i still do real weakhand loading. Link to comment Share on other sites More sharing options...
racknrider Posted May 30, 2016 Share Posted May 30, 2016 And now for a Teaspoon of sand thrown at the ocean.....you just don't need a fence pole length tube. I know of at least 3 real good 3-gunners that are always in the top ten who run 8-9 round tubes. I have never used over a 9 round tube, and I still seem to do OK, and i still do real weakhand loading. Yeah, but I don't want to practice as much as the guy that put 300k rounds through a shotgun ? Link to comment Share on other sites More sharing options...
Deadcoyote Posted June 8, 2016 Share Posted June 8, 2016 So +9 it is. Thanks for the input. I was thinking 24 or 26 initially because that was the suggestions I got. I just happened to find a new M2 with a 28" barrel for 800, so I grabbed it.Just be careful if you happen to live in one of the restricted states I live in Georgia these days. I moved from CA about 2 years ago. There's no restriction on tube magazine capacities in CA. Just putting it out there. Link to comment Share on other sites More sharing options...
mikeyjones Posted June 9, 2016 Share Posted June 9, 2016 So +9 it is. Thanks for the input. I was thinking 24 or 26 initially because that was the suggestions I got. I just happened to find a new M2 with a 28" barrel for 800, so I grabbed it.Just be careful if you happen to live in one of the restricted states I live in Georgia these days. I moved from CA about 2 years ago. There's no restriction on tube magazine capacities in CA. Just putting it out there. Yet another spot where CA has it better than NJ in terms of gun laws. Amazing. Link to comment Share on other sites More sharing options...
kmca Posted June 9, 2016 Share Posted June 9, 2016 So +9 it is. Thanks for the input. I was thinking 24 or 26 initially because that was the suggestions I got. I just happened to find a new M2 with a 28" barrel for 800, so I grabbed it.Just be careful if you happen to live in one of the restricted states I live in Georgia these days. I moved from CA about 2 years ago. There's no restriction on tube magazine capacities in CA. Just putting it out there. Yet another spot where CA has it better than NJ in terms of gun laws. Amazing. Not too sure about that. The way I read PC 16740, the only tubular magazines that are exempt from the 10 round maximum are tubular magazines affixed to 22 caliber and lever action rifles. I could be wrong Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now