crossgun

NO issues at all running COLT QC10 Lower, QC10 Side Charger upper, Taccom Barrel and Brownell's Mags with TF +10

Agree with everything said especially having click switch over aluminum housing. I did get luck and bought my aluminum on a flash sale on Amazon for same price as plastic.

New to PCC shooting and just getting all things figured out. I did try and look through the rules but couldn't find any clarity of the use of Vertical Forend Grips. Are they approved for use on PCC for USPSA. As I look through the gallery I also notice that there are not really any pictured.

Pretty sure I am going to buy a C-More Railway to run on the PCC. Guess there are a few options that I really don't understand. Thoughts and help needed please. Polymer or Aluminum body? Standard or Click Switch? I'm thinking 8 MOA dot but willing to listen.

Also received mine today. Awesome quality and machining. All lines match my QC 10 lowers perfect. Really smooth operation and finish. A part of me wishes that the charging handle was even slightly larger or stuck out a little more. Pending the handguard your running the latch can get a little hidden or trapped. On my QC 10 Glock lower no issue as that upper has a Taccom Ultralight Carbon handguard. On my Colt upper I was running a UTG rail but it will not fit the QC10 side charging upper because it needs to over lap on to the upper. Most of the other rails I have lying around are a little more tactical and too wide for my liking shielding the side charging handle. Any one have any thoughts on a narrow rail? Would like to keep the width near 1 1/2 - 1 5/8. Dont really want to run anotherTaccom as I am now looking for something a little different.

PRS all day long or even a NRA F Class shooter over MIL

Have a new QC10 lower on its way. For 33 round mags do I have any options other than the OEM Glock stick?

Thanks I think. I just received a Colt style today, just my luck. It is awesome! With 30% savings I'm going to try the Glock.

Really? Stock on belt with muzzle pointed up or horizontal? So the muzzle can be above the berm? Is low ready good to go?

Just getting into PCC. Close to having the carbine up and running. Could someone explain the START or Ready position as I am sure there must be one? Also any rules regarding magazine carry or placement?

This post was about the HMR so I replied accordingly. Funny thing is that after buying my HMR I was so happy with it that I bought the BMP as well. It would appear to shoot better than yours. Easily 1 MOA but not as good as my HMR. The trigger it came with SUCKED! HEAVY, I assumed it was just set heavy at the factory but wasn't the case after getting inside. I called and sent them a pic of the barreled action hanging from my trigger scale having yet to fire. They did get me a replacement which I have yet to try seeing I put a Jewel in it. What was up with the extraction issue? I am seeing it from time to time with my BMP as well.

OMEGA

Well seems like you need a little push. Just buy the damn thing cause they shoot. My 6.5 Creed running factory Hornady 140 gr ELD MATCH. I have spent way more money on custom rifles that didnt shoot factory ammo this good. Six shots at 100 covered by a dime which is which is 0.705

I have both the BMP and HMR in 6.5 Creed. While I like what might come down the road long term with the BMP (barrel/caliber options) I really favor my HMR. It shoots just a TAD better and I do love the stock. If your looking for a hunter and precision rifle all in one I would go HMR. If games or PRS then the BMP. I was not impressed at all with the factory triggers and chose to try the Trigger Tech.

Sightron fills this niche very well. High magnification, lots of elevation and side focus that is much less than 25 yards. 1/8 MOA and .05 MIL adjustments. I am currently running a 2nd FP which has to be run at 24X for reticle to be sized correct. I usually dial out to 200 so not an issue for me. You did say BEST and precision in the same sentance. Look at the reviews on You Tube by Long Range Shooters of Utah

Seeing I am new to this why would I want a longer throat? Longer bullets? What about mag length or is there some room? More than likely I will continue to shoot factory ammo. I agree about the naked looking however I really don't want to be more than 16" and I have yet to see a 14.5" offering. After looking at the Spinta SS barrels I see they are only offered in 1:16 versus 1:10 like most. Is that a concern?

Looking for some help sourcing a new 9mm barrel. At this point would like a lighter profile seeing I am looking for 16". Be great if it was not threaded seeing it appears comps are really not that effective on the 9mm or at least that is what I have gathered. Who are the go to guys or manufactures in the 9mm barrel arena that are accurate and run? If I wanted to SBR what would the ideal length be for PCC?

I own the RPR Gen 1 in 308 and have made a few upgrades. LRI components, Seekins hand-guard, Jard trigger and changed out the butt stock. At that end of the day its still a clunky Ruger. I bought it to be a tactical rifle primarily because of the folder and the fact it took PMAGS and I have 308 gasers. I cut the factory barrel to 16" and threaded for a can. It is what it is as far a rifle but it does shoot 1/2 MOA honestly to my surprise. Before all the mods I think I was into this rifle for $1150 All that being said, I just got a Bergara B14 HMR in 6.5 Creed and it rocks and is 10X the rifle for $900 ish. Basically a Remington 700 design with a full adjustable stock, adjustable trigger, side bolt release, enlarged bolt knob, lighter profile barrel that is threaded and capped and runs on AICS style mags which Magpul now offers and one is included with the rifle. Being a Surgeon rifle guy at heart I can tell I have a new found friend and its Bergara! They also do a chassis style version that is awesome for around $1400 with a Savage style barrel nut for easy barrel changing or caliber conversions. Just this past weekend I broke in the barrel and shot a few Hornady 140 Match ELDs. Covered all 5 shot groups with a dime at 100. Currently I have a Burris XTR II 5-25 on it for development. That would serve you great in production PRS. Basically this is a $2K rifle set up and ready to compete. Not a lot to upgrade other than the trigger is you wish and seeing its a 700 clone tons of mounts and other items. Do both of you a favor and take a serious look. I will try to post a few pictures later if I can figure it out.

I'm having Steve at RAS build me a shotgun with some options. The mag tube will hold 10 total as I really don't want that much tube forward of the 24" barrel. If needed I could screw on a plus 2 to add 4 rounds. He is also having a plug made to limit the 10 round tube to a MAX of 8 rounds, Seeing I'm not sure what the correct answer to this is riddle is I figure options are always the best.

MarkCO Little help please, SSXLs ?

Took a look at the Carbon Arms vest and while I like the actual vest body with shoulder straps it appears its only a twin load system.

I believe I am in search of a quad load vest that would be more like a molle or chest rig. Really looking for something that has more than just one single belt or band that goes around the torso. My tactical ledge is steering me to go the vest route and stay off the belt. Is it possible somehow to attach quad loaders to something that would be molle compatible and then just wear a chest rig of my liking? Not sure how stiff or rigid the vest needs to be to support tearing the shells out. NEW to the quad load thing and currently own nothing. Trying to get it right the first time out of the gate this time!

Mark Where did you send it and what mods are being done?

I am liking what I am seeing here. That cut seems to make sense.

Been running a few of the 15" UTG PRO Keymod rails for 3 gun without issue. They are machined very well and nicely detailed. Easy install and match well on MUR uppers. I like the fact that all sides are keymod and they index or lock along side the upper to prevent rotation.