Neomet Posted December 24, 2014 Share Posted December 24, 2014 Open , Steel Challenge, 3 gun Link to comment Share on other sites More sharing options...
z40acp Posted December 24, 2014 Share Posted December 24, 2014 (edited) I have been wanting a CTS LS-P since I seen it in a magazine. I think CZ needs to settle on the best combo and make 2000. I would like to see some factory slide lightening, like a Glock 34 or a High Power. The full length frame might be a little too heavy with the longer slide, maybe shorten the SP01 frame .750". Edited December 24, 2014 by z40acp Link to comment Share on other sites More sharing options...
Gdub Posted December 25, 2014 Share Posted December 25, 2014 So if I have a SP01 decked out by CZC, why not just fit a TS slide to my SP01 instead of buying a whole new gun? Link to comment Share on other sites More sharing options...
eerw Posted December 25, 2014 Share Posted December 25, 2014 So if I have a SP01 decked out by CZC, why not just fit a TS slide to my SP01 instead of buying a whole new gun? Can be done. Link to comment Share on other sites More sharing options...
alma Posted December 25, 2014 Author Share Posted December 25, 2014 I seen this a couple of nights ago but I'm new to the CZ world so I didn't realize what I was looking at. So what would this be legal in right now? Limited, Limited 10, what else? Those and Open. It could be Production legal once they make another 1,999 and submit it to DNROI. Link to comment Share on other sites More sharing options...
himurax13 Posted December 25, 2014 Share Posted December 25, 2014 I built the same thing in 9mm but decided against it. You can't play IDPA with the SP01 frame and you can only play in Limited in USPSA. The magazine capacity is smaller than the Glock, STI/2011, CZ tactical sport, and the Witnesses. Although it is an awesome gun, it is limited in what it can be used for. Link to comment Share on other sites More sharing options...
kneelingatlas Posted December 25, 2014 Share Posted December 25, 2014 The standard frame CZ only holds 15 rnds max of .40 in a 140mm mag, so it doesn't make a very good Limited gun (which is wjat the TS is for). 9mm on the other hand has roughly the same capacity potential in the 75 frame or the TS frame. Link to comment Share on other sites More sharing options...
SDM Posted December 26, 2014 Share Posted December 26, 2014 I built the same thing in 9mm but decided against it. You can't play IDPA with the SP01 frame and you can only play in Limited in USPSA. The magazine capacity is smaller than the Glock, STI/2011, CZ tactical sport, and the Witnesses. Although it is an awesome gun, it is limited in what it can be used for. Why can't you use an SP01 frame in IDPA? Link to comment Share on other sites More sharing options...
himurax13 Posted December 26, 2014 Share Posted December 26, 2014 I built the same thing in 9mm but decided against it. You can't play IDPA with the SP01 frame and you can only play in Limited in USPSA. The magazine capacity is smaller than the Glock, STI/2011, CZ tactical sport, and the Witnesses. Although it is an awesome gun, it is limited in what it can be used for.Why can't you use an SP01 frame in IDPA? You can't slap a CTS/TS slide on an SP01 frame for IDPA. There is a bunch of stupid IDPA regulations that concern the SP01, but the bottom line is that it has to meet SSP requirements in order to play ESP. Adding the longslide will prevent it from meeting the SSP requirements. You can slap it onto a SA frame and play in ESP with no issues. It will fit in the box with the 10 or 16 round mags. As awesome as a CTS/TS slide on an SP01 frame is, it is stuck to playing in limited since it won't meet Production class rules either. As far as velocity goes, it adds less than 15 fps over the Australian Shadow barrel. Link to comment Share on other sites More sharing options...
eerw Posted December 26, 2014 Share Posted December 26, 2014 (edited) I built the same thing in 9mm but decided against it. You can't play IDPA with the SP01 frame and you can only play in Limited in USPSA. The magazine capacity is smaller than the Glock, STI/2011, CZ tactical sport, and the Witnesses. Although it is an awesome gun, it is limited in what it can be used for.Why can't you use an SP01 frame in IDPA? Dustcover is too long. Can only be 3.5" from slidestop hole to front of gun Edited December 27, 2014 by eerw Link to comment Share on other sites More sharing options...
SDM Posted December 27, 2014 Share Posted December 27, 2014 I wasn't thinking about a measurement, I was just thinking it wasn't full length anymore with the longer slide. Thanks for setting me straight. Link to comment Share on other sites More sharing options...
z40acp Posted December 28, 2014 Share Posted December 28, 2014 I built the same thing in 9mm but decided against it. You can't play IDPA with the SP01 frame and you can only play in Limited in USPSA. The magazine capacity is smaller than the Glock, STI/2011, CZ tactical sport, and the Witnesses. Although it is an awesome gun, it is limited in what it can be used for.Why can't you use an SP01 frame in IDPA? Dustcover is too long. Can only be 3.5" from slidestop hole to front of gun What about the frame from the Combat II? Link to comment Share on other sites More sharing options...
eerw Posted December 28, 2014 Share Posted December 28, 2014 (edited) What about the frame from the Combat II? You'd have to find a Combat II not a great many of them out there. Edited December 28, 2014 by eerw Link to comment Share on other sites More sharing options...
eerw Posted December 28, 2014 Share Posted December 28, 2014 in case anyone is about to ask Link to comment Share on other sites More sharing options...
RexKramer Posted December 28, 2014 Share Posted December 28, 2014 That new CZC looks similar to the Viper from Waffen-Oschatz. Viper is 9mm, though. http://www.waffen-oschatz.de/CZ_75_SP01_Viper.html I'm very interested in that TS Shadow. Keep makin' em!! Link to comment Share on other sites More sharing options...
Kingman Posted December 28, 2014 Share Posted December 28, 2014 I want the carbon fiber grips. Link to comment Share on other sites More sharing options...
Adam B Posted December 28, 2014 Share Posted December 28, 2014 from what I can see on their website, the grips are just the aluminum grips that have been hydro dipped to look like carbon fiber Link to comment Share on other sites More sharing options...
SufferInSilence Posted December 29, 2014 Share Posted December 29, 2014 Will it work on my P01 frame? Not serious, just wondering… Link to comment Share on other sites More sharing options...
dlightning Posted January 3, 2015 Share Posted January 3, 2015 I can not find this TS SP-01 in 9mm just the 40 on czcustom. I am serious about getting a shadow target. Have one on lay away. Plan to shoot production then limited down the line. I can not afford multiple guns, should I wait? Or just get the shadow target now and later put a TS slide on, and also get a 40 for limited? My biggest hang up about the current TS is the size. It just does not fit my hands. Shadow target is a perfect fit. Any help/suggestions would really be appreciated. Thanks Link to comment Share on other sites More sharing options...
smoothdraw Posted January 22, 2015 Share Posted January 22, 2015 here in SP01 frame. P01 should work as well but not decocker. 23+1 in 9mm using CZ custom spring kit, 18 rd tube and cz custom short extended basepad. Link to comment Share on other sites More sharing options...
kneelingatlas Posted January 22, 2015 Share Posted January 22, 2015 Will it work on my P01 frame? Not serious, just wondering I suspect the P01 dust cover is not long enough to cover the recoil system of the TS slide. Link to comment Share on other sites More sharing options...
kneelingatlas Posted January 22, 2015 Share Posted January 22, 2015 Plan to shoot production then limited down the line. I can not afford multiple guns, should I wait? Or just get the shadow target now and later put a TS slide on I'm confused, if money is an issue, why are you getting a Shadow Target? A tuned SP01 will make you pretty happy for a third the cost. Getting a TS slide fit to a Shadow is not a cheap operation either. Besides, if you fit a 40 top end to a Shadow you'll only get 15 rnds max of .40 in a 140mm mag. If the TS grip is too large, I suggest an EAA Limited, the grip size is more in line with the small frame CZs, plus you can get a Limited and an SP01 for the cost of a Shadow Target. Link to comment Share on other sites More sharing options...
eerw Posted January 22, 2015 Share Posted January 22, 2015 Surprisingly it works. CTS top on a Compact L frame ( similar to P01 ) only thing about a P01, no firing pin block on slide, not sure if would want a decocker gun without a FPB Link to comment Share on other sites More sharing options...
Haywizzle Posted January 22, 2015 Share Posted January 22, 2015 Great shots Stuart. My mouth is watering... phrasing Any insider info on those tops ends being available by themselves? Link to comment Share on other sites More sharing options...
himurax13 Posted January 22, 2015 Share Posted January 22, 2015 (edited) Will it work on my P01 frame? Not serious, just wondering I suspect the P01 dust cover is not long enough to cover the recoil system of the TS slide. I am not sure about the fitment with the dustcover on the P01 but I know for certain that the firing pin block lifter will prevent me form sliding the CTS frame on. I don't feel like messing with a decocker sear cage unless I have to. Edited January 22, 2015 by himurax13 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now