BiggMike Posted June 21, 2015 Share Posted June 21, 2015 I am looking for a limited elite but not a pro. I am trying to get more 3 gun shooters involved in a great pistol through education. Good luck with that. Most guys that see I'm running a CZ are terrified that there's no passive safety. 2011s are in the same boat being that with most custom 2011s the grip safety is pinned. Most ROs that I have talked to don't count the grip safety as a legal safety device since most often than not its pinned. Still doing the Tanfo/2011 debate myself I was doing the Tanfo/2011 debate and I went with a Trubor 9mm. My biggest determining factor is the amount of parts and the number of gunsmiths. I think I made the best decision for me; so much so I looking at getting an Akai Custom. I went to his shop and holy crap; his custom builds are very nice. On another note, I don't understand pinning the grip safety. If you grab it then it will shoot; that's one mod I will not be making. Link to comment Share on other sites More sharing options...
Iggy42 Posted June 21, 2015 Share Posted June 21, 2015 I am looking for a limited elite but not a pro. I am trying to get more 3 gun shooters involved in a great pistol through education. Good luck with that. Most guys that see I'm running a CZ are terrified that there's no passive safety. 2011s are in the same boat being that with most custom 2011s the grip safety is pinned. Most ROs that I have talked to don't count the grip safety as a legal safety device since most often than not its pinned. Still doing the Tanfo/2011 debate myself I was doing the Tanfo/2011 debate and I went with a Trubor 9mm. My biggest determining factor is the amount of parts and the number of gunsmiths. I think I made the best decision for me; so much so I looking at getting an Akai Custom. I went to his shop and holy crap; his custom builds are very nice. On another note, I don't understand pinning the grip safety. If you grab it then it will shoot; that's one mod I will not be making. I never understood pinning it either. If you have proper grip then its not a problem, its not something I would do either. I still can't choose between the two although I am leaning toward a 2011, mostly as I have looked over the last couple of days there are no Limiteds or Lim Pros to be found. Plus because my biggest fear is leaving my pistol behind when I shouldn't thus earning a trip to Dairy Queen I really want level 2 retention and I just can't find a level 2 holster for a Tanfo. Anyway - BRING ON MORE GUN PORN! Link to comment Share on other sites More sharing options...
nhjeffs Posted June 27, 2015 Share Posted June 27, 2015 My S3. Link to comment Share on other sites More sharing options...
Big Nick Posted June 29, 2015 Share Posted June 29, 2015 Beautiful! Link to comment Share on other sites More sharing options...
Big Nick Posted July 29, 2015 Share Posted July 29, 2015 My next project. I mounted a .22 conversion on my Limited Pro frame. I'm going to modify a factory magwell to accept a stock .22 mag. I'm having my machinist buddy make me some extended mag bases and then it's off to the races. I've only fired 10 rounds of slow fire with no problems. Tomorrow I'm running 50 rounds thru it. Slow and rapid fire. Link to comment Share on other sites More sharing options...
PatriotDefense Posted July 29, 2015 Share Posted July 29, 2015 It gets expensive when your wife shoots and she has the same taste in guns that you do. On another note, moving from a G34 to the Tanfo took a bit of a learning curve but for sure never going back. Link to comment Share on other sites More sharing options...
kneelingatlas Posted August 16, 2015 Share Posted August 16, 2015 I'm taking these two to the range next week Link to comment Share on other sites More sharing options...
Open1215 Posted August 16, 2015 Share Posted August 16, 2015 What caliber is that? Barrel? Link to comment Share on other sites More sharing options...
Big Nick Posted August 16, 2015 Share Posted August 16, 2015 Beautiful. Link to comment Share on other sites More sharing options...
kneelingatlas Posted August 16, 2015 Share Posted August 16, 2015 What caliber is that? Barrel? The short one is a Stock II slide, 38 supercomp with a two port comp, (4) 1/8" holes in a V pattern and (3) 5/32" holes straight up. I got the long one ready to shoot: Limited slide, 9mm with three port comp, no holes for the first trip but will likely end up with (3) 3/16" holes straight up; I'll start with 1/8" holes, then open them up after I chrono. Link to comment Share on other sites More sharing options...
Open1215 Posted August 16, 2015 Share Posted August 16, 2015 Ahhhh looks nice! I'm excited to see how the 3 port comp set up works Link to comment Share on other sites More sharing options...
bigboy69 Posted August 17, 2015 Share Posted August 17, 2015 What do you guys think of the grip tape??? Link to comment Share on other sites More sharing options...
kneelingatlas Posted August 17, 2015 Share Posted August 17, 2015 Gives me a headache Link to comment Share on other sites More sharing options...
SpaceFlunky Posted August 18, 2015 Share Posted August 18, 2015 Link to comment Share on other sites More sharing options...
norbs007 Posted August 18, 2015 Share Posted August 18, 2015 I'll play... Link to comment Share on other sites More sharing options...
johnbu Posted August 18, 2015 Share Posted August 18, 2015 Thoughts on the henning grips? Link to comment Share on other sites More sharing options...
norbs007 Posted August 18, 2015 Share Posted August 18, 2015 Thoughts on the henning grips? I like it... it's between the stock wood and the Xtreme, fills my hand better than my Xtreme but got no issue using either one. Link to comment Share on other sites More sharing options...
kernelofwisdom Posted August 18, 2015 Share Posted August 18, 2015 I'm taking these two to the range next week Very nice! RTS looks great and shows you aren't afraid to live on the edge! Link to comment Share on other sites More sharing options...
maleman000 Posted August 18, 2015 Share Posted August 18, 2015 Thoughts on the henning grips? I like it... it's between the stock wood and the Xtreme, fills my hand better than my Xtreme but got no issue using either one. What color are you grips, look bronze in pic. Link to comment Share on other sites More sharing options...
johnbu Posted August 19, 2015 Share Posted August 19, 2015 Thoughts on the henning grips? I like it... it's between the stock wood and the Xtreme, fills my hand better than my Xtreme but got no issue using either one. Thanks. I've got a set ordered, but while waiting for back order to be filled the mind wonders if they were the best choice! Link to comment Share on other sites More sharing options...
Garmil Posted September 3, 2015 Share Posted September 3, 2015 Here is my limited. Link to comment Share on other sites More sharing options...
Open1215 Posted September 3, 2015 Share Posted September 3, 2015 Wow. That's beautiful! Link to comment Share on other sites More sharing options...
BeerBaron Posted September 3, 2015 Share Posted September 3, 2015 Very nice garmil. how do you like the rts2? How would you compare it to the traditional cmore slide ride? I love my 90 degree mounted cmores but my new open gun has an rts2 on it. I'm unsure whether or not I'll try it out or go straight to a regular cmore. Link to comment Share on other sites More sharing options...
Garmil Posted September 3, 2015 Share Posted September 3, 2015 So far so good just sighted it in today. I've only shot a glock with a 90 degree slideride a few times. Not much optic experience. Link to comment Share on other sites More sharing options...
niroth81 Posted September 3, 2015 Share Posted September 3, 2015 What is this new open gun and why have we not seen porn of it yet Baron? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now