goosedowner Posted March 3, 2011 Share Posted March 3, 2011 I used Vihtavuori powders in my 40 when I shot USPSA but I was wondering if anyone uses it in their 9's and if so which one. Thanks Link to comment Share on other sites More sharing options...
dsmw5142 Posted March 3, 2011 Share Posted March 3, 2011 (edited) hello, Do a search right here in the 9mm reloading sub-forum. I think you'll find the runaway favorite is N320 at least for minor loads anyway. Edited March 3, 2011 by dsmw5142 Link to comment Share on other sites More sharing options...
GSWEAR Posted March 3, 2011 Share Posted March 3, 2011 You will find tons of info here, about every thread on 9mm load data will have something. That said my IDPA / general use load is 4.0 / 4.1 N320 with a Montana Gold 124JHP. A charge of 3.9 / 4.0 Titegroup works well also and is cheaper, the only reason I use N320 is because it's a little cleaner. Link to comment Share on other sites More sharing options...
CocoBolo Posted March 3, 2011 Share Posted March 3, 2011 N320 Minor #1 and 3N37, N350, 3N38, or N105 for major with VV not having a big following in Major 9. There are a lof of major 9 posts as well as minor 9. Link to comment Share on other sites More sharing options...
ormondopen Posted March 3, 2011 Share Posted March 3, 2011 (edited) I use N320 for 9mm minor and .40 major. Edited March 3, 2011 by ormondopen Link to comment Share on other sites More sharing options...
mlmiller1 Posted March 3, 2011 Share Posted March 3, 2011 I use & have used a lot of v.v.3n37 in 9, both minor & major, & in .40. Glad I'm stocked up, though, as the price has really gone up the last year. MLM Link to comment Share on other sites More sharing options...
Jeff Matzka Posted March 3, 2011 Share Posted March 3, 2011 N320 for 9mm Minor in Production. Link to comment Share on other sites More sharing options...
Chris Keen Posted March 3, 2011 Share Posted March 3, 2011 320 for minor 9, and major 40. Link to comment Share on other sites More sharing options...
Jman Posted March 3, 2011 Share Posted March 3, 2011 I'm a healthcare worker. So...Hodgdon for me. Link to comment Share on other sites More sharing options...
Sarge Posted March 3, 2011 Share Posted March 3, 2011 N320 by far! Link to comment Share on other sites More sharing options...
RH45 Posted March 4, 2011 Share Posted March 4, 2011 320 for minor, 350 for major Link to comment Share on other sites More sharing options...
alpha-charlie Posted March 4, 2011 Share Posted March 4, 2011 N320 for 9 minor with a 147MG. Link to comment Share on other sites More sharing options...
Blank Zero Posted March 5, 2011 Share Posted March 5, 2011 When I first started, I used VV N350 with 147gr follow the description from VV website. Then I joined this forum and switched over to N320 and love it ever since Link to comment Share on other sites More sharing options...
Ridder Posted March 7, 2011 Share Posted March 7, 2011 When I first started, I used VV N350 with 147gr follow the description from VV website. Then I joined this forum and switched over to N320 and love it ever since A lot of people use N340 around here (and also N320)....like me. Link to comment Share on other sites More sharing options...
BigBets Posted March 7, 2011 Share Posted March 7, 2011 320..soft and VERY clean Link to comment Share on other sites More sharing options...
Jon Merricks Posted March 7, 2011 Share Posted March 7, 2011 GD, You looking for production loads, open, or what? Link to comment Share on other sites More sharing options...
goosedowner Posted March 8, 2011 Author Share Posted March 8, 2011 yep production loads. I also need some 357 sig loads for VV (Practice) Link to comment Share on other sites More sharing options...
kevin c Posted March 8, 2011 Share Posted March 8, 2011 I'm a healthcare worker. So...Hodgdon for me. ? ? Link to comment Share on other sites More sharing options...
19852 Posted March 9, 2011 Share Posted March 9, 2011 N320 is my favorite. Also like N340. I did find some N330 to try. Link to comment Share on other sites More sharing options...
pjb45 Posted March 9, 2011 Share Posted March 9, 2011 VV 320 for 9mm, 40S&W, and 45ACP. Clean, accurate, and easy to deal with. Link to comment Share on other sites More sharing options...
CZinSC Posted March 10, 2011 Share Posted March 10, 2011 I was using Titegroup for 9mm Production. 124FMJ. Once I tried N320, I have not gone back. Still have about 6 pounds of TG just collecting dust on the shelf. N320 is soft and clean, and meters extremely well in my 550. Yes, it can be $15 more than TG for a one 1# can. If 1# = 7000 grains, and you load 4.2gn per round, you get approximately 1666 rounds. For TG its about .009 cents per round, for N320 it's .017 cents per round. I'm more than happy to pay .008 cents per round more based on the way it feels. Link to comment Share on other sites More sharing options...
Red Ryder Posted March 12, 2011 Share Posted March 12, 2011 I'm a healthcare worker. So...Hodgdon for me. +1. I am a healthcare worker also. I buy TiteGroup. Can't afford much else. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now