1981Shooter

They have mentioned that more calibers will be available in the future, but I haven't heard anything other than rumors on what those calibers will be.

I had like an 80% FTE rate out of the box. Tuning the extractor got it down to about 30%, which was still terrible. I dropped in the Wilson Combat Bulletproof and it's ran perfectly with zero tuning.

T&N and Dissident don't have nearly the level of engineering support and capital behind them as Mossberg and Remington. They'll get it figured out much quicker than that.

Based on the design, I would assume it uses any Glock trigger.

The stock front sight on mine was junk. The FO sucked and I couldn't adjust the rear sight far enough to make it shoot less than 4" at 7yds. I used the Dawson sight calculator and ended up getting a .210 tall one from them. My rear sight is now a few clicks from bottomed out and the zero is perfect.

There have been a few companies at shot show marketing aluminum and steel frames for Glocks. http://www.thetruthaboutguns.com/2018/01/jeremy-s/alpha-foxtrot-releases-two-glock-compatible-aluminum-frames/ http://www.thetruthaboutguns.com/2018/01/jeremy-s/zrodelta-releases-worlds-first-fully-modular-pistol-genesis-z9-video/

I've been running the TorkMag G Block adaptor and it's ran great for me. I've been using it in an old SAA lower that wouldn't drop free any mags, so it was just sitting around. I did it as a way to test the waters of the PCC world and see if I liked it. Now I'm hooked and will probably be getting a dedicated lower soon, but I had no issues at all with the TorkMag setup.

I've been running the same Primary Arms microdot that's on my 10.5" pistol now for around 8 years. I finally had to put a new battery in it last year.

I was looking at this one because I need a pistol brace for another build and it's cheaper than buying the brace separately. Of course it's the one without free shipping right now http://palmettostatearmory.com/psa-px9mm-billet-complete-moe-pistol-lower-with-sob-brace-uses-glockr-516447409sob.html

I don't load my own, using Stillwood Ammo 77gr SMK's, but those are my go to >200yds. They cut the wind a little better than 55gr bullets, but 350yds isn't really long enough to reap all the benefits of a 77gr projectile. I use them past 200yds because they're more consistent than the cheap 55gr that run for the close in hoser stuff. I'll sometimes use the 77gr inside of 200yds if the target is small for the same reason though.

I've been running my PSA upper with a TorkMag conversion block in a standard lower. Thinking it's about time to buy a dedicated lower though. I'm expecting there to be some sort of great deal on them popping up this week with SHOT Show going on.

I changed the velocity for each projectile to match 130PF, so 1130 for 115gr, 1050 for 124gr (which is the load I'm running), and 885 for 147gr.

Interesting. I ran the formula with multiple projectile weights, all pushing around 130PF, keep coming back to 1.7lbs or 27oz. I couldn't find my kitchen scale this morning, but going off of the manufacturers website numbers, my PSA bolt weighs 15oz and the Taccom 3-stage weighs 6oz, so I'm at 21oz total weight currently.

Optics Planet has 14% off triggers currently. The HIPERFIRE 24 3 Gun is $116.95 shipped with code TRIG14. I just ordered another one.

They will attach to almost any AR15 or AR9 style lower. If you're running it on an AR15 lower, you'll need an adaptor. I've been running one on a SAA lower with a TorkMag G Block adaptor. Took me about 5 mins to to install and tune it, but it's been running great since then. You'll also need a PCC specific buffer and spring setup.

How old were they? Older PSA barrels had a pretty short chamber, the newer barrels are stamped "PCC CHAMBER" and are generously chambered.

They're a new product, are they actually available in stock anywhere yet? Optics Planet lists them at $1700, but says they'll ship in 9-18 days. My experience with Optics Planet tells me that means they actually have no clue when they'll have them to ship.

Major/minor scoring in 3 Gun!?!?! Let's not get too crazy here...

I'm always worried about winning, so I guess I need to just shoot my CO in Open and see what happens. Change my class to Open for MO 3Gun! (just kidding, please don't )

I'm not opposed to getting CO guns into a division somewhere at all. I have several Glocks with RMR's on them, including my EDC G19. I've never used them in 3 gun because it puts me in Open and I don't feel I'd be competitive in that division with my rifle and shotgun. I also don't feel that it would give me much of an advantage in TacOps or Limited either though, with the exception of longer pistol shots. With that said, I see a lot of irony in the people saying, "Carry Optics pistols shouldn't be in the Tactical Optics division, they should be in a more Tactical division that allows optics". If anything, I think CO pistols should be rolled in TO. I guarantee that the top shooters will still smoke me with iron sight pistols, but allowing them in a class where someone new could be somewhat competitive has the probability of getting more people into the sport. What's the real difference between Limited and TO in most rule sets anyways? It's just a dot vs a scope on the rifle and sometimes the shotgun is limited to holding a max of 8+1. No difference between the pistols at all, so why not allow a tactical style pistol optic in the TACTICAL OPTICS division. Although that might lead to people arguing for shotgun optics in TO as well, which will make some heads explode. It's really funny how polarizing this topic has been, but you're always going to have people that are extremely opposed to change of any type. All sports have to evolve with the times or they become stagnant and lose favor. I'm not saying that not adopting CO will make that happen to 3 gun, but don't just draw a line in the sand and refuse to ever move. Eventually the tide will win.

Night and day difference between the original static buffer and the TACCOM 3-stage buffer, I actually like shooting this gun now. I still think I can dial in the recoil impulse a little better with load development and possibly different buffer springs, but I like it so far. Shooting 124 RMR FMJ FN with 3.1gr Titegroup @1050fps.

Should be a pretty interesting report getting to try so many different setups side by side. Looking forward to hearing the results.

I'm finally going to get to test mine out today. Had it almost a week and it's been killing me not shooting

My 3 stage buffer just showed up today and I popped it in. I'm going to shoot a pistol match tonight, but am hoping to have time before to test it out.

There's no reason this shouldn't be standard on all models. Damn you Gaston!