BradfromND
Classified-
Posts
109 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Everything posted by BradfromND
-
recommend me a good front sight for my 3 gun shotgun
BradfromND replied to minnesota1's topic in Multi-gun Gear & Accessories
Happened to me which is why I have the Briley sight. It is the same sight as the Hi-viz but is dovetailed into the rib and can't come out. -
JP 14.5 Barrel - Ultralight vs Light Contour
BradfromND replied to Adamj's topic in Rifle - Technical
I started out trying to make my rifles so light. My rifles have gotten a little heavier as I gained more experience. For me, I dont mind as little extra weight as long as it balances the rifle. That, to me, is more important. Switching from Tacops to Limited I noticed quite a difference in recoil just from taking my heavy Razor off and switching to a lightweight Spitfire. I added a PRS stock to add a little more weight back to the rifle, but the weight is against the shooter and I really like the way it handles. Your parts list looks like it should be a sweet machine. Enjoy! -
I haven't noticed it makes as much of a difference as it does in a handgun. Shooting form will mitigate more recoil in a rifle instead of chasing the "new shiny" when it comes to comps. The titan is a great comp and you won't be disappointed. Work on getting a solid foundation and shoot whatever load your rifle likes best.
-
recommend me a good front sight for my 3 gun shotgun
BradfromND replied to minnesota1's topic in Multi-gun Gear & Accessories
I had Briley install one of their front and rear sight sets on my m2. The front sight is the same as many others except that it is dovetailed into the rib and can't come out. I've had my front sight screw come loose on a stage and it was a big problem. Their rear sight is really nice. It's basically a rear sight milled in to the rib and is windage and elevation adjustable. Check them out. -
What 3 gun holsters are you running STI 2011
BradfromND replied to Megamind's topic in Multi-gun Gear & Accessories
I use a g-code and had to do a little modification to make it fit the wide dust cover on my Atlas. I'm a big fan of the rti mount so I can remove the holster on stages where I don't need a handgun. The hook on the g-code also pops down faster than the others that I've seen and the release seems to make more sense to me. The lever gets pushed straight down instead of in towards the shooter like the others. Evike.com has them in stock if you don't want to wait to have one built. -
Are you sure it's lead and not the plastic wad melting into the barrel? Mine gets wad buildup because of the long strings of fire and how hot we get them. Lucas Oil extreme duty bore solvent dissolves it better than anything else I've found.
-
I got my first can this year and don't know why I waited so long to finally get one. I went with a TBAC ultra 7 and couldn't be happier. I use it on my 300wm, 6.5x284, 243 and .223 coyote rifles. It's only 7 inches long and weighs only 9.5 oz. It will be on my rifle for my muley hunt starting in 2 weeks.
-
Like others have stated, I usually start at minimum 7 yards. I feel better at 9 or 10 but some of our bays are narrow so shots on the sides get tighter.
-
I use 69 smk over a stout load at 2911 avg and it works very well at distance. At major matches I also use 55 nosler ballistic tip for hoser ammo and will use it to 300 yards with confidence. People have asked why I shoot expensive bullets for hoser ammo but it is literally a $10 difference at a major match for piece of mind knowing I am running good ammo. I've spent more money on dumber ideas many times.
-
"Prone with a hot pistol"
BradfromND replied to atomicferret's topic in Multi-gun Rules / Stage Design / Match Administration
I never allow a hot pistol to go prone at my club matches. I have a ton of new shooters and many show up with a nylon holster, etc and have minimal retention. Mag inserted, empty chamber is how I'll start a stage where prone is required or I will have the handgun portion before the rifle so the pistol is already abandoned. -
2017 NORDIC VORTEX TRI-GUN
BradfromND replied to -=VILLAMOR=-'s topic in Multi-Gun, Rifle & Shotgun Match Announcements
Come on Denise! I suppose the new camper hasn't been there yet. 4648 240th st n Forest lake, mn 55025 -
Affordable Adjustable Gas Block
BradfromND replied to timawa's topic in Multi-gun Gear & Accessories
It's not a bleeder type. The set screw that shuts off the gas is below the opening in the gas tube. All the others I've seen have the set screw actually go through the opening in tube. Every time I have tried to replace the tube, the set screw through the hole has seized up and strips out. With the screw below the tube, you don't have that same problem. Although at around $50 for a gas block and $15 for a tube, I consider them a consumable item and don't have a problem just replacing them at the end of a shooting season. It's no different then changing the oil in your vehicle. -
Affordable Adjustable Gas Block
BradfromND replied to timawa's topic in Multi-gun Gear & Accessories
Check out ergo too. I like that they cut off the gas before the tube vs the screw going through the tube. -
2017 NORDIC VORTEX TRI-GUN
BradfromND replied to -=VILLAMOR=-'s topic in Multi-Gun, Rifle & Shotgun Match Announcements
Can't wait for this this match! -
I use WildEar hearing boosters for hunting and shooting. The master set that I have has 4 different "modes" to enhance different frequency levels. They are custom molded and have adjustable volume. The process is very simple to mold at home and then you send the molds into them and they make the ear pieces. Zach is a great guy to work with too.
-
I like everything on my guns to match so I have been in the same situation as you. Pm sent
- 30 replies
-
- front cocking serrations
- slide lightening
- (and 3 more)
-
Surefire World Multigun 2016
BradfromND replied to ziebart's topic in Multi-Gun, Rifle & Shotgun Match Announcements
I have no irons in the fire here as I'm not shooting the match, but I will share my opinion. Transparency is key! You say you have a formula figured out that is fair. What's the formula? You want examples of how it cold benefit certain shooters. How about examples from you as to how it wont? The whole thing sounds a lot like the tv show "Who's Line Is It Anyway", "the show where everything's made up and the points don't matter". Why not 5 points per target? Certain targets can be worth increased points to keep people from shooting once and moving on (ie. Long range steel or spinner). Seems a lot more simplified than once everyone is done, we will hand out points and let the chips fall where they may...... -
Stoeger M3K inertia spring failure
BradfromND replied to Boxerglocker's topic in Shotgun - Technical
-
I just wanted to say thanks to Jay, Jomar, Chris, Ron, the RO's and everyone else involved in such an awesome match. You guys ran it like clockwork and the stages were awesome. Each stage seemed to have its own theme and the props, etc took a pretty straightforward stage and added a whole new twist. Excellent work! I'd also like to say thanks to the rest of my group on Squad 7. Everyone had a blast and Denise really kept us on our toes (while also providing the entertainment) I'd also like to say thank you to all of the great companies that sponsored the match, especially Nordic Components and Vortex Optics. The food and beverages provided Friday and Saturday night is such a great way to get everyone together and wind down after a hot day dragging tires around, running through the woods and trying not to shoot horses in the tail. Excellent job guys! I'll see you all next year! Brad
-
What ever kind is in your squad mate's shooting bag when your current battery is dead because you fail to remember that there is an off switch on said scope.....
-
This one! http://www.brownells.com/shotgun-parts/sights/front-sights/comp-sight-prod26017.aspx
-
Did the gas key move on the bcg and causing a bind? Make sure the gas block didn't rotate and cause the tube to angle into the receiver and bind up on the gas key.
-
Converting Comp-Tac/Bladetech Magpouches to Safariland
BradfromND replied to Thaunk's topic in Multi-gun Gear & Accessories
I used screws -
What locking holster for 2011 for 3 gun?
BradfromND replied to louu's topic in Multi-gun Gear & Accessories
G-code has a spring loaded rotating hood. It will not work a LDC though If you have a heat gun, you can make it work. They mold it off a Tactical model which happens to be the only narrow full length dust cover. I love mine but it did take some work to reform it to fit the wide dust cover. To me, the hood drops in half the time of a wrs and that's why I went with g code.