hump

I do this all the time. 55gr inside 200 and 72 gr eld-m past that. I zero with the 200 gr at 200 yds. I just shot a DMR match out to 500yds using 55 gr ammo and had no issues hitting 2 moa targets. I prefer the 72 gr eld-m bullets but didn't have enough loaded for this match.

I have been running a Hybrid contour for the lase 2 seasons and it's more accurate than I am. Shoots MOA to 300 yds easily.

Dissident Arms can install one of their magwell and offer other upgrades. Great guys and products.

I loaded some with Power Pistol with good results. I prefer JHP but the Brass Monkey 124gr worked fine in my SPS Vista.

I run a 15lb commander length on both of mine. The 14 worked but I occasionally had a light strike. The 13 did not always go completely into battery. My ammo is loaded to 130pf.

I run the Sig P320 guide rod with a 14lb Commander spring in both of mine. Freedomsmith triggers and Holosun 507 optics

WSF should be very soft shooting. I use Shooters World Auto Pistol for mine. 5.4 grs gets my about 132 pf.

If you decide to offload them I'll take them

I bought 2 Canik TP9SFX's and added the Freedomsmith triggers and really enjoy shooting them. I was shooting aCZ Shadow 1 and don't miss the weight difference at all. The Canik is as accurate as the CZ. The trigger on my Canik breaks at 2.4lbs with a very short reset. I an running a Holosun 507 optic.

I shoot a CZ Shadow Target and load with several different powders. My normal OAL is 1.06. I have never had any problems with over pressure. I admit they look to short but they function as they should.

8-10k rounds.

I run the same spring in my SPS for 170pf and 135pf ammo. The ejection is weaker but function is 100%. I use a 9lb spring.

I have been running a Vista Short with both major and minor loads for more than a year. I changed the extractor, ejector and firing pin and have shot 8-10k rounds with very few issues. I ran some 130pf loads thru it today to check POI before a 3 gun match this weekend. When I shoot USPSA I run 170pf JHP's. The gun is still very tight and smooth. I put a Holosun 510C with an Atlas mount and it has been rock solid.

It looks the same to me. I run mine without a shield

I use the Atlas mount

I use adjustable sights and do a bench zero at 12 yds

I had this issue until I installed an extended firing pin. I thought the gun came with one installed but I was wrong.

I agree. If your worried about recoil you don't need a 12ga shotgun. A gas operated shotgun doesn't have a lot of recoil to start with.

My CZ has a 5.4 lb double action and a 2.1lb single action. The trigger was done by CZ Custom.

I just switched from a Shadow 1 to a Canik for CO and my times are better doing drills I use to measure my performance. The double action first shot caused me issues with the CZ. I did replace the trigger and some springs on the Canik to get the trigger to 2.4 lbs.

20 yards

Shooting an open class shotgun I a hoot too. With 20 plus rounds of 12ga and a dot you usually have a big grin on your face.

Not sure about the accuracy of the Sig but I just returned from sighting in a new Canik TP9FSx and it as accurate as my CZ SP01 Shadow Target Custom. I shot them both side by side at 20yds and the groups were under 2" offhand with 124gr HP reloads at 130pf.

When I shot tac ops I went with the M3K Stoeger and never had any issues. I opened the loading port for quad loading, installed a Bennelli extractor and spring and did a trigger job on it.