oteroman

Who makes those LARGE grips in the photo?

Curious what the chrono says. Let us know. I run these as the 900fps, 1.14oal but for a different application, and not with Clays. It is hard not to make a soft load with this heavy of a bullet.

Correction- N320 is much safer...

You will get a lot of opinions on your question. I find CFE pistol on the snappy side, similar to Titegroup. N310 or Clays would be my choice, but with the caveat that you need to experienced loading those two powders. N310 is much safer.

Anyone carry 8lb'ers of Aliant E3?

I use Extreme 165 9mm projectiles and like the load. Small volume available for powder, powder choice is important especially if you need high velocity. I push them at 900 fps.

Ditto

What diameter are your 135's?

Locktite the pin is needed it appears; what strenght?

Call Blue Bullets!!!!!!!!!!!!!! Give them an Opportunity To Please you. If there end is week give the company a chance to make it right. If you you were in business and QC fell short for whatever reason would you want a customer to tell you and ask to correct it? HELL YES, it the American way. Not jump ship and run to another vendor. I have been using Blue for a very long time no issues. FYI this company sponsors a ton of events, they are the real deal. Carry on.

FWIW WHERE? That is what everyone would enjoy hearing about.

OK ?? It is a drying issue period.

Sounds like the cases are not totally dry.I use SS pins and this happens when the Cases are not totally dry...

I understand his machines are very busy coupled with several projects. I put a G24 suppressor barrel in my G35 with a TF sight block. Turned out great, I had to have the SB milled a tad to make the barrel be flush with technology front of the SB. This is not something TF sells yet, like the 9mm SB.... he has been great but busy.

Well what is your varience on your bullet OAL... I have a LNL as well and some have more slop than others..I had to shim the ram to tighten mine up. Not positive this is your issue..

Favorite or what you use.......?

RF-100

Brass? Extraction OK or hard?

Add what brass too please. Range brass, Starline, Winchester etc....

Normal IMO due to more of the brass surface being worked.

Not until tomorrow. Midnight. Google the blue bullets 15% There are 2 or 3 codes all for the same 15% off

I have them for my LNL. DILLON AND HORNADY If your she'll plate is snapping into detent, you identified your problem IMO.

Mr. Bullet expander, like a M-Die

I Want your cylinder

Kevinj308 how was the case extraction? What headstamp was the brass?