mdh Posted March 28, 2017 Share Posted March 28, 2017 I recently rediscovered a Schuemann Hybrid barrel for a Gen 3 G19 in my box of Glock things...any recommendations on where to send a slide to be milled for it? Just looking to build up a "FUN" gun not for any specific type on competition...although if I happen to stumble upon a class for it... Thanks, MDH Link to comment Share on other sites More sharing options...
EngineerEli Posted March 28, 2017 Share Posted March 28, 2017 I had no clue Schuemann hybrid barrels existed for Glocks, sounds like a fun project. Does the barrel already have holes in the rib? Link to comment Share on other sites More sharing options...
mdh Posted March 28, 2017 Author Share Posted March 28, 2017 Barrel is already ported and dovetailed for a front sight. I'm about 95% sure it is a Schuemann, perhaps I should have described it as Schuemann like (Schuemannesque)? MDH Link to comment Share on other sites More sharing options...
EngineerEli Posted March 28, 2017 Share Posted March 28, 2017 Link to comment Share on other sites More sharing options...
mdh Posted April 4, 2017 Author Share Posted April 4, 2017 Somebody please stop me from doing this...!! Link to comment Share on other sites More sharing options...
Distant Thunder Posted April 4, 2017 Share Posted April 4, 2017 Stop! Don't do it! You won't respect yourself in the morning! Okay, that's all I've got. Link to comment Share on other sites More sharing options...
lefty o Posted April 7, 2017 Share Posted April 7, 2017 On 4/4/2017 at 9:36 AM, mdh said: Somebody please stop me from doing this...!! now thats funny! Link to comment Share on other sites More sharing options...
PaladinPrecision Posted April 7, 2017 Share Posted April 7, 2017 I am just here for the aftermath... Link to comment Share on other sites More sharing options...
colt1911 Posted April 11, 2017 Share Posted April 11, 2017 Please do it!Sent from my XT1585 using Tapatalk Link to comment Share on other sites More sharing options...
Eliboudreaux Posted July 9, 2017 Share Posted July 9, 2017 do they still make these barrels? i want one.lol Link to comment Share on other sites More sharing options...
mdh Posted April 7, 2019 Author Share Posted April 7, 2019 Necro-post time!! This thing has been back burnered for so long that I thought I had traded off all of the parts. Lone Wolf slide milled for hybrid barrel and Gen 4 MOS plates on a Polymer 80 frame. Only Glock parts on it are a minus (-) connector and the MOS plates. No actual Glocks were hurt putting this together! Function tests fine, should be test firing later this week. Link to comment Share on other sites More sharing options...
HCH Posted April 8, 2019 Share Posted April 8, 2019 I like it!!! Link to comment Share on other sites More sharing options...
Amerflyer48 Posted April 8, 2019 Share Posted April 8, 2019 Could see this on my G40 I can dream I guess. Link to comment Share on other sites More sharing options...
Helios Posted April 9, 2019 Share Posted April 9, 2019 Following - this is quite interesting, though can someone explain the benefit of the island on a gun with an optic? Link to comment Share on other sites More sharing options...
Amerflyer48 Posted April 9, 2019 Share Posted April 9, 2019 3 hours ago, Helios said: Following - this is quite interesting, though can someone explain the benefit of the island on a gun with an optic? It is a ported island so a more compact compensated gun one could argue it bridges the gap between a simple “Mag-Na-Port” job and a full blown comp/barrel weight. Link to comment Share on other sites More sharing options...
Paul49 Posted April 9, 2019 Share Posted April 9, 2019 Who milled the Lone Wolf slide for this barrel? Link to comment Share on other sites More sharing options...
BigMoneyGrip Posted April 10, 2019 Share Posted April 10, 2019 On 4/4/2017 at 9:36 AM, mdh said: Somebody please stop me from doing this...!! I say roll with it! Down a couple of six packs the steady the hand, though. Link to comment Share on other sites More sharing options...
Dutycalls75 Posted April 23, 2019 Share Posted April 23, 2019 For anyone that’s interested, there is a small shop out west, called Trinity Nevada, that is making traditional island/ribbed barrels again as well as a more modern design comp design. Here is they’re Facebook page: https://m.facebook.com/trinitynv/ Link to comment Share on other sites More sharing options...
mdh Posted April 25, 2019 Author Share Posted April 25, 2019 On 4/9/2019 at 10:42 AM, Paul49 said: Who milled the Lone Wolf slide for this barrel? I did...didn't you see that dang precision gunsmithing tool?? Seriously, it was a shop out here in Denver. The name escapes me at the moment as it was done quite a while ago. Finally got around to test firing and I have successfully mad a single shot pistol. When I put this together, I just used factory spring rates. Looks like I need to experiment with springs to get it functioning proper. And so it goes... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now