chrisct Posted February 26, 2009 Share Posted February 26, 2009 I'm buying gear and trying to decide how many 4-round speed strippers I need. I figure if I have four 4-round strippers, +9 in the gun, that will get me through a 25 round shotgun stage. Will that be enough? Link to comment Share on other sites More sharing options...
Ron B Posted February 26, 2009 Share Posted February 26, 2009 Assuming you don't miss a shot, need slugs or drop a shell while reloading, yes. An additional stripper or some type of sidesaddle type setup on the gun would be good to have IMO. Ron B. Link to comment Share on other sites More sharing options...
bigbrowndog Posted February 26, 2009 Share Posted February 26, 2009 I typically have 7 carriers, but 2 rarely get used and they are just to keep special ammo separate from SHOT, if you can carry 29rounds on you including the stuff in the gun, you should be good for 99% of the SG stages you'll see. Remember on a typical 25 round pistol course, you probably have 60+ rounds on you, so carrying extra is not a bad thing. trapr Link to comment Share on other sites More sharing options...
kurtm Posted February 26, 2009 Share Posted February 26, 2009 In the U.S. 4-5 4 round strippers would be fine...overseas I have had 6 six round Choate loaders on me plus the 9 in the gun and had 2 shells left at the end of a stage. The only thing that even came close was the 45 round stage at CMMG last year. I like the 6 round holders as for every grab of 4 you do you have 2 in reserve for the same amount of belt space used up...,just something to think about. KurtM Link to comment Share on other sites More sharing options...
Neil Smith Posted February 26, 2009 Share Posted February 26, 2009 (edited) If you ever plan to shoot an IPSC shotgun match the long stages can have 28 rounds so you may want to carry a few more as Kurt & the browndog say. N Edited February 26, 2009 by Neil Smith Link to comment Share on other sites More sharing options...
High Lord Gomer Posted February 26, 2009 Share Posted February 26, 2009 I carry 4, 6 round clips. If the stage has slugs in addition to the birdshot, I prefer to carry the slugs in a different place, eg on the gun or an armband. That helps me keep the separate if I miss and need to load another slug. Link to comment Share on other sites More sharing options...
RiggerJJ Posted February 26, 2009 Share Posted February 26, 2009 four 4 round holders is not enough... jj Link to comment Share on other sites More sharing options...
chrisct Posted February 26, 2009 Author Share Posted February 26, 2009 (edited) Thanks for all the replies. So what does everyone use...4-shell or 6-shell holders? I was steered away from the 6s because of the difficulty of just grabbing 4 under pressure. I like the idea of more shells, but I'm probably weakest with shotgun reloading, so I didn't want to make it harder on myself. What's the consensus? Obviously I need to figure out what works for me, but would 4X 6-shell holders a good place to start? Edited February 26, 2009 by chrisct Link to comment Share on other sites More sharing options...
abn-rgr Posted February 26, 2009 Share Posted February 26, 2009 Thanks for all the replies.So what does everyone use...4-shell or 6-shell holders? I was steered away from the 6s because of the difficulty of just grabbing 4 under pressure. I like the idea of more shells, but I'm probably weakest with shotgun reloading, so I didn't want to make it harder on myself. What's the consensus? Obviously I need to figure out what works for me, but would 4X 6-shell holders a good place to start? I like the 4's for the reasons above. I also think the 6's are too long and can hit your legs when bending. YMMV. Link to comment Share on other sites More sharing options...
chrisct Posted February 26, 2009 Author Share Posted February 26, 2009 Thanks for all the replies.So what does everyone use...4-shell or 6-shell holders? I was steered away from the 6s because of the difficulty of just grabbing 4 under pressure. I like the idea of more shells, but I'm probably weakest with shotgun reloading, so I didn't want to make it harder on myself. What's the consensus? Obviously I need to figure out what works for me, but would 4X 6-shell holders a good place to start? I like the 4's for the reasons above. I also think the 6's are too long and can hit your legs when bending. YMMV. Do you guys have an auxiliary belt where these shot gun speed strips mount, or are they on your normal pistol belt? Currently the only rifle/shotgun gear I have is a Wilderness belt that I use for IDPA to mount a pistol holster and mag carriers. Link to comment Share on other sites More sharing options...
D.Hayden Posted February 26, 2009 Share Posted February 26, 2009 Use what works for you. Using kurtm as a model.. you can't go wrong.. Link to comment Share on other sites More sharing options...
kurtm Posted February 26, 2009 Share Posted February 26, 2009 All I use is a Wilderness belt, I have seen way too many of the Velcro belt depart the shooter. I have also never had a 6 round holder hit my leg, but a lot of folks go with 4 round holders because it is less confusing...except if you need an extra or two. KurtM Link to comment Share on other sites More sharing options...
chrisct Posted February 26, 2009 Author Share Posted February 26, 2009 Cool, thanks for the replies everyone. I think I'll get 4-5 of the 6-rounders, a box of dummy shells and practice practice practice. Link to comment Share on other sites More sharing options...
bigbrowndog Posted February 27, 2009 Share Posted February 27, 2009 when I started I was grabbing 3 shells and could go to a carrier twice, since then I've progressed to grabbing 4, I only load 4 into the carrier unless i need the extra rounds, I have now gotten to where I can grab 5 if I really need to, but its not pretty!! I much prefer the 6rd carriers to the 4rd carriers. Trapr Link to comment Share on other sites More sharing options...
ddjm Posted February 27, 2009 Share Posted February 27, 2009 Hope this helps. http://www.brianenos.com/forums/index.php?...st&p=781856 Darren Link to comment Share on other sites More sharing options...
EkuJustice Posted February 28, 2009 Share Posted February 28, 2009 I usually will have 3-4 of the 6 rounders, plus a side saddle, 2 on the forend and 9 in the gun. I go strippers first then use the sidesaddle as extras if need be and the 2 on the forend incase i need one in the tube quick. The only time i go straight for the side saddle is if I need to do a mixed slug/shot reload in the middle of the stage. I stack them in the order I need them and go front to back down the side saddle and dont miss lol. It might take a hair longer than off the belt but they are going to be in the correct order and I have the side saddle load down pretty well Link to comment Share on other sites More sharing options...
ShooterSteve Posted February 28, 2009 Share Posted February 28, 2009 Under the stress of the timer, I'm not the best at grabbing just 4rds out of the 6 shell holder, so I took the dremel and made a small notch in the front of the plastic holder. Now when my hand goes down and slides down the front of the holder, when my finger hits the notch, I know that is the place to dig in and come up with 4 rounds. I got this from another member on a similar thread, and it works great. Also like EkuJustice, if I have a mix n match stage, I use the side saddle, but I take a big marker and put a big "s" on the end of the slugs so I can tell them apart. Looks kinda goofy but it works. Link to comment Share on other sites More sharing options...
mpeltier Posted March 1, 2009 Share Posted March 1, 2009 I use 4-4rd carriers, and when the stage may require a few more I have an old M60 ammo pouch with a fastex buckle I strap on with whatever I need for the extra. Its not usually very many. The lead of the shot always has them base up in the pouch so grabbing a few is intuitive and takes up no realestate on my already crowded belt. Link to comment Share on other sites More sharing options...
Brian Payne Posted March 1, 2009 Share Posted March 1, 2009 I use four 4-rd Progressive Machine and Tool holders on a Mark Otto chest rig, then three 6-rd PMT holders on the belt. I did have to modify the clips on these to raise the holders up so that I could bend over normally, otherwise they would get in the way. I also have an 8-rd arm band I can put on if needed. Link to comment Share on other sites More sharing options...
Big Bore Posted March 1, 2009 Share Posted March 1, 2009 Iron Man: 10 in the gun 16 on the side saddle. Plus 2 bondoliers of 16n and sometimes an forearm shell holder with 8. Usually enough to get you to the end. Link to comment Share on other sites More sharing options...
Les Snyder Posted March 2, 2009 Share Posted March 2, 2009 I have a Blackhawk shotshell pouch hidden away in my gear box just in case someone decides to put on a KyleL style 32 round jungle run. regards Les Link to comment Share on other sites More sharing options...
Bryan 45 Posted March 3, 2009 Share Posted March 3, 2009 I use the 6 round strippers and an old GI pistol belt. 3 Gun is the only time I wish I had a bigger waist. 32" isn't quite enough to get all the gear where you need it. Although for most matches, I can drop one of the AR mag carriers and add another 6 round stripper. Link to comment Share on other sites More sharing options...
busyhawk Posted March 4, 2009 Share Posted March 4, 2009 Like Bryan 45 but for the Iron-Man my belt looks like the below picture, with a Blade-Tech drop thigh rig for 3 AR magazines and attached to each magazine pouch (Blade-Tech screws/nut combo) are 3 each California Customs 6 round caddies. I believe alot better than a bandolier... Link to comment Share on other sites More sharing options...
cksh8me Posted March 13, 2009 Share Posted March 13, 2009 If you shoot X3 monthly matches you will have 30 plus round stages with slugs mixed in the middle. The California series will have high round counts and you'll have to use bird, buck and slugs. It's interesting. Carry accordingly. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now