sarge450 Posted December 18, 2015 Share Posted December 18, 2015 (edited) Nice! Did akai build it? Yes, V8 model. Still breaking it in but so far it's awesome. Edited December 18, 2015 by sarge450 Link to comment Share on other sites More sharing options...
sniper3 Posted December 20, 2015 Share Posted December 20, 2015 craigsteffek , that is a work of art !! Link to comment Share on other sites More sharing options...
Rangerdug Posted December 27, 2015 Share Posted December 27, 2015 My new open gun in 9mm Major built by Doug Jones at Acc-U-Rail. CK Arms slide/frame, SV Grip, Binary Engineering comp, Cheely 90 degree setback, Brazos XL Zigracker. I also had him fit another barrel in .38 SC with a Cheely 4 port comp. Hoping to get out Thursday afternoon to shoot it. Very nice gun, built by a guy that know a little about guns too. I want to ask if the slide racker is the ball/detent and swichable from left to right? Doug did that per your request, correct? Great idea. Nice gun Link to comment Share on other sites More sharing options...
Rangerdug Posted December 27, 2015 Share Posted December 27, 2015 My limcat flashcat after refinishing burnt bronze New limcat mount should be here Saturday I love that cut on the limcat Link to comment Share on other sites More sharing options...
Rangerdug Posted December 27, 2015 Share Posted December 27, 2015 Here is a picture of my Freedom GunWorks Open gun in 9mm major. I have had the gun for 8 months and it has ran flawlessly. I might just order me another one. I love the slide work on that Link to comment Share on other sites More sharing options...
Rangerdug Posted December 27, 2015 Share Posted December 27, 2015 How many Open guns is too many? I like the bronze one... That is a good looking pistol Link to comment Share on other sites More sharing options...
Rangerdug Posted December 27, 2015 Share Posted December 27, 2015 Does this qualify as open? It is my 3-gun unlimited pistol If it doesn't, thank you for sharing anyway Link to comment Share on other sites More sharing options...
Rangerdug Posted December 27, 2015 Share Posted December 27, 2015 Appreciate your response. Glad the comp works well. Could I ask if your gun is a two- or three-port hybrid barrel? I can see two holes but want to make sure. Also, are there "standard" specs on how much and where the hole at the top of the comp is to be cut? Thanks. There are two Benny Hill "Hell Holes" in the barrel which I believe are 3/16", the barrel is 4.9" so it's sort of a mid length bull barrel gun. I bought the comp used with the slot already cut in the top; from all the pictures I've seen of these comps, some have holes in the comp, some have slots, but they all seem to incorporate at least some barrel ports. This one looks like it has seven holes in the barrel plus the slot in the comp: I like the Akai guns Link to comment Share on other sites More sharing options...
Rangerdug Posted December 27, 2015 Share Posted December 27, 2015 My brand new 9 mm Major That has a very simple elegance... Nice gun Link to comment Share on other sites More sharing options...
kimberacp Posted January 1, 2016 Share Posted January 1, 2016 Rangerdug, what scope mount is that??? Link to comment Share on other sites More sharing options...
bigboy69 Posted January 5, 2016 Share Posted January 5, 2016 Here's one of mine. Gun wouldn't run when I got it. Removed the serendipity and put a 90 on it. Now it runs like a sewing machine. Do you think i can get a slide racker put on this??? Link to comment Share on other sites More sharing options...
a matt Posted January 5, 2016 Share Posted January 5, 2016 I figure you will have to screw it to the top. It doesn't look to have enough meat left to cut? I have the same issue on mine. Link to comment Share on other sites More sharing options...
bigboy69 Posted January 5, 2016 Share Posted January 5, 2016 Screw it to the top?? Link to comment Share on other sites More sharing options...
a matt Posted January 5, 2016 Share Posted January 5, 2016 You can have a small notch ( shallow) cut in the slide you just need to be careful of the firing pin channel. If you do cut into the channel mount the racker and check for function. You may need to notch the slide-racker to allow the pin to work properly, then again maybe not??? Good luck, I am thinking of doing to the same.. Link to comment Share on other sites More sharing options...
bigboy69 Posted January 6, 2016 Share Posted January 6, 2016 I thought about having something welded on. And then dovetailed for racker Link to comment Share on other sites More sharing options...
a matt Posted January 6, 2016 Share Posted January 6, 2016 I'm sure that can be done. Maybe check on a new slide then you can lighten how you like. But the new side may cost to much in the end. Good luck, show us some pics when you are finished. Thanks Link to comment Share on other sites More sharing options...
bigboy69 Posted January 8, 2016 Share Posted January 8, 2016 @ a matt, here is the pic I was trying to find. I didn't know how to send it to you in a message. But look how this is cut behind the hood. That's why I thought with my gun there would be enough meat left to cut one or a custom one in. Link to comment Share on other sites More sharing options...
kneelingatlas Posted January 8, 2016 Share Posted January 8, 2016 (edited) You can have a small notch ( shallow) cut in the slide you just need to be careful of the firing pin channel. If you do cut into the channel mount the racker and check for function. You may need to notch the slide-racker to allow the pin to work properly, then again maybe not??? Good luck, I am thinking of doing to the same.. Perfect Edited January 8, 2016 by kneelingatlas Link to comment Share on other sites More sharing options...
a matt Posted January 8, 2016 Share Posted January 8, 2016 @ a matt, here is the pic I was trying to find. I didn't know how to send it to you in a message. But look how this is cut behind the hood. That's why I thought with my gun there would be enough meat left to cut one or a custom one in. Wow, that is close. I have no experience with any gun cut that close. I mean it could just fine. But I just can't say for sure. Seems like that must be ok. Sorry.. Link to comment Share on other sites More sharing options...
T.McDevitt Posted January 17, 2016 Share Posted January 17, 2016 My limcat flashcat after refinishing burnt bronze New limcat mount should be here Saturday I love that cut on the limcat My Limcats the first is a 22LR others 9mm Link to comment Share on other sites More sharing options...
troupe Posted January 19, 2016 Share Posted January 19, 2016 I think Johnny sleeps with a mill beside his bed, if he sleeps at all. Artwork. Link to comment Share on other sites More sharing options...
Sarge Posted January 19, 2016 Share Posted January 19, 2016 Link to comment Share on other sites More sharing options...
Open1215 Posted January 19, 2016 Share Posted January 19, 2016 That turned out awesome! Link to comment Share on other sites More sharing options...
Sarge Posted January 19, 2016 Share Posted January 19, 2016 That turned out awesome! Thanks! Link to comment Share on other sites More sharing options...
JMike Posted January 20, 2016 Share Posted January 20, 2016 That is beautiful Sarge. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now