Bakerjd Posted December 23, 2021 Share Posted December 23, 2021 I've wanted an AO1 since they first were announced. But I've shed away partially because I know it won't get shot very much but mostly because I womder if it will be sensitive to primers like my tanfo was. I normally use CCI SPP or ginex primers. Link to comment Share on other sites More sharing options...
jpeters11 Posted December 23, 2021 Share Posted December 23, 2021 They’ll pop CCI primers as long as you don’t go too light on the hammer spring. Think the CGW 11.5 lit them fine in my old one with the typical 6/2 DA/SA pull. They aren’t drastically different from a shadow 2, I’m sure there’s plenty of those guys running CCI or Ginex Link to comment Share on other sites More sharing options...
Hooked Posted December 23, 2021 Share Posted December 23, 2021 (edited) I run 2 A01LDs, both set up the same: 11lb mainspring, extended firing pin, reduced power firing pin spring and CZ Custom Ghost hammers. No issues in igniting CCI or Ginex primers - around 35k rounds in one gun and about 18k rounds in the other. If you keep the gun completely stock, you will have absolutely no problems in setting off any small pistol primer due to hardness. One thing with Ginex primers is to make sure you set them deep. Edited December 23, 2021 by Hooked Link to comment Share on other sites More sharing options...
Bakerjd Posted December 23, 2021 Author Share Posted December 23, 2021 Thanks for the info. I want to love my p320 legion with all the trigger work and still..... yeah I hate the trigger. Girlfriend loves hers. I think I'll just go for the AO1. Link to comment Share on other sites More sharing options...
Silverscooby27 Posted December 26, 2021 Share Posted December 26, 2021 I have an A01 LD that CZ Customs made for me, took 6 months to make…and I haven’t shot it yet. Link to comment Share on other sites More sharing options...
Silverscooby27 Posted December 26, 2021 Share Posted December 26, 2021 Honestly I would call Stuart Wong and tell him what your concerns on the primers are, and he’ll be able to configure the gun however you want. And while he’s at it, you can configure any of the other things like the trigger however you want and even get it DLC coated or hard chromed. That’s what I did. Link to comment Share on other sites More sharing options...
Bakerjd Posted March 12, 2022 Author Share Posted March 12, 2022 I have come full circle on this and am gonna get the A01. Was going to just get the shadow 2 but I really like amd want the A01. My second go round with a tanfo has resulted in the same dislike as the first time. Link to comment Share on other sites More sharing options...
Silverscooby27 Posted March 12, 2022 Share Posted March 12, 2022 I still haven’t shot mine yet Link to comment Share on other sites More sharing options...
Silverscooby27 Posted March 12, 2022 Share Posted March 12, 2022 I did pick it up and dry fire it a little bit the other day though and man the trigger is nice. Link to comment Share on other sites More sharing options...
Nathanb Posted March 12, 2022 Share Posted March 12, 2022 10 hours ago, Bakerjd said: I have come full circle on this and am gonna get the A01. Was going to just get the shadow 2 but I really like amd want the A01. My second go round with a tanfo has resulted in the same dislike as the first time. Good call even if you got the shadow you’d have ended up with the a01 just for that fact it’s what you really want. It’s a great gun. Shooting them back to back it’s noticeable how little muzzle flip the a01 has compared to the S2. And that’s saying something. for what it’s worth I didn’t enjoy my tanfo. Just never felt right in my hands. The cz s2 and all variants fixed that. Link to comment Share on other sites More sharing options...
eerw Posted March 12, 2022 Share Posted March 12, 2022 Like any CZ set up with the right springs, FP, hammer and set the primers deep as you can… Link to comment Share on other sites More sharing options...
Superkaratemonkeyfighter Posted March 12, 2022 Share Posted March 12, 2022 Go for it. no gun is primers sensitive. light springs on the other hand are. Link to comment Share on other sites More sharing options...
Bakerjd Posted March 13, 2022 Author Share Posted March 13, 2022 I ended up snagging a "used" A01LD at my favorite gunshop today. I say used with quotations because after looking at everything on the gun and mags I'm 99% sure the previous owner never fired it at all. Got it for $1800. Only thing is that it isn't an optic ready model so I'm gonna see if CZC can mill the slide for their plate system. Not sure if I want to go with my normal FTP Alpha 3 or a DPP 6moa. I like the A3 but the DPP wouldn't require any extra milling except for the plate. The A3 is longer then a RTS2 so it or a romeo 3max would. Also want to getbthe extended right side safety and maybe some more grippy grips (I like a very aggressive texture) I love it. Trigger is damn fine right out the box. Link to comment Share on other sites More sharing options...
Silverscooby27 Posted March 13, 2022 Share Posted March 13, 2022 That’s a smokin deal, dude. Enjoy! Link to comment Share on other sites More sharing options...
kamber Posted March 13, 2022 Share Posted March 13, 2022 18 hours ago, Bakerjd said: I say used with quotations because after looking at everything on the gun and mags I'm 99% sure the previous owner never fired it at all. Got it for $1800. What a find! Enjoy!!! Link to comment Share on other sites More sharing options...
Bakerjd Posted March 13, 2022 Author Share Posted March 13, 2022 I thought so as well. And even with getting the RDS CZC plate system cut amd a plate for the romeo 3max I'm still under the original cost. Link to comment Share on other sites More sharing options...
Posvar Posted March 15, 2022 Share Posted March 15, 2022 On 3/13/2022 at 4:46 PM, Bakerjd said: I thought so as well. And even with getting the RDS CZC plate system cut amd a plate for the romeo 3max I'm still under the original cost. Congrats! You will love it. Link to comment Share on other sites More sharing options...
Tunachaser Posted March 15, 2022 Share Posted March 15, 2022 I have Lok grips on mine and, as I have a large number of 75B mags, I had them make the grips so I could use them in my A-01. Link to comment Share on other sites More sharing options...
Posvar Posted March 15, 2022 Share Posted March 15, 2022 Just now, Tunachaser said: I have Lok grips on mine and, as I have a large number of 75B mags, I had them make the grips so I could use them in my A-01. Yep. Lok is great like that. Lots of guys hesitated to come over to the A01 from the 75 due to the mags. The 75 mags actually work in the gun as is but wiggle around. Link to comment Share on other sites More sharing options...
Bakerjd Posted March 15, 2022 Author Share Posted March 15, 2022 I noticed CZC had special grips for the 75 mags in a A01. Link to comment Share on other sites More sharing options...
Posvar Posted March 15, 2022 Share Posted March 15, 2022 23 minutes ago, Bakerjd said: I noticed CZC had special grips for the 75 mags in a A01. Yes. Stuart has been very helpful with things like that. Link to comment Share on other sites More sharing options...
SuperKing Posted March 15, 2022 Share Posted March 15, 2022 (edited) 5 hours ago, Tunachaser said: I have Lok grips on mine and, as I have a large number of 75B mags, I had them make the grips so I could use them in my A-01. What did you have to specify in your order to get them to do that? EDIT: Neve mind; I see that they instruct you to contact them. Edited March 15, 2022 by SuperKing Link to comment Share on other sites More sharing options...
Posvar Posted March 15, 2022 Share Posted March 15, 2022 2 minutes ago, SuperKing said: What did you have to specify in your order to get them to do that? EDIT: Neve mind; I see that they instruct you to contact them. Haha. Yes, they are really fast to reply and will do one off special things sometimes too. Link to comment Share on other sites More sharing options...
Bakerjd Posted March 27, 2022 Author Share Posted March 27, 2022 Picked it up today. Stuck doing stuff with the ol lady so I can't go to the range yet. Link to comment Share on other sites More sharing options...
Bakerjd Posted March 28, 2022 Author Share Posted March 28, 2022 Shot it and wow. Love it. Just need to send off to CZC for milling the red dot plate. Also what hammer springs, and extended firing pin works with this gun? Would like to reduce the DA a little. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now