Jump to content
Brian Enos's Forums... Maku mozo!

jpeters11

Classified
  • Posts

    90
  • Joined

  • Last visited

Everything posted by jpeters11

  1. Loosen the top 2 screws of the holster body a little. Some trigger guards are wider than others and will bind with the holster tightened all the way down. You shouldn’t have to worry about it changing during a match, but I keep a 5/64 driver in my bag just in case.
  2. The a01 mag release is wider for the p10 mags. It will work, just not ideal. I swapped shadow 2 mag releases into my a01s since I’m using 75 mags. Real pain to find stateside, I ordered one from Eric gruaffel’s store and another from X-ray parts in Italy. Both shipped real fast and prices weren’t atrocious even with the shipping, $75ish
  3. All the IMMs I’ve seen have had pretty beat up optic mounts. Mine got dinged up right out of the box, this is a pic a couple hundred rounds from new. I’d blame it on the mount being in the way, but my 2020 IMM with the older normal extractor is still perfect. Every now and then mine will stovepipe as well, but it doesn’t happen frequently enough to bother looking into. I usually just write it off as the gun being dirty. What recoil spring are you running? Still full stroke?
  4. Shootersconnection gets open guns from them a few times a year, might see one in stock there faster than the quoted 6 months. Shoot them an email and see when they’re expecting more.
  5. You can warranty ones bought secondhand. They don’t ask where you bought it, rounds fired, anything. Just serial and the issue. Send it in totally bare, keep your old battery tray, screws, all that. I think I’ve bought maybe 1 new Romeo 3 xl and have had like 8 warrantied without a problem.
  6. If the buttons are acting goofy, they can be sent in for fresh units. Done this a few times and they were replaced real quickly.
  7. No, running wolf 12lb variable springs and 135ish pf 124gr
  8. I’ve got 8 140mm mags. Henning rx pads on 4 and TTI on the other 4. Rune followers and springs in all. Easy 24+1 in all of them. No grinding other than the tubes of the Rx ones.
  9. They’ve been run long before they were announced. Don’t think he wanted to post a hard number on what they could do because of basepad differences. With a henning extension, rune follower and his 11 coil spring, 24+1 is easy, heck you can even reload to a 24 round mag if the need arises.
  10. Yeah, that’s what they’ve been sending out for about a month now. Got mine direct from sig on warranty as well.
  11. I’d suggest messing with recoil springs and maybe switching ammo. I was having feeding issues with my stock GG 15lb recoil spring and slower 147gr ammo when starting with a full mag +1 in the chamber. After going to 12lb wolff variable recoil springs and faster 124gr ammo, I haven’t had a single malfunction in quite awhile.
  12. Make a slave pin. Assemble the cage outside the frame.
  13. jpeters11

    Too much?

    Not as much cutting as I’ve done for SSI nitrofins in the past. DAA didn’t require as much
  14. jpeters11

    Too much?

    I bought one to try and I’m not a huge fan of the angle, not as extreme as I’d like, probably great for others. As for holsters and hangers, you just have to do a little cutting. Seems like the T1000 hanger ought to work. I’d go with a Safariland pattern plate if your holster allows
  15. Only $1k with the Romeo 3 max. If you want the slide bad, just buy a complete gun and sell the parts you don’t need.
  16. I’ve got maybe 3k through my 4 CO 320 mags. No complaints so far, hold a ton. Buddy of mine probably has 20-25k through his 75 mags with the rune follower and springs. Hard to say what he has on the final revision, but he hasn’t had any issues. 24+1 is cool
  17. Pretty sure Cheely XWFs ship like that. Looks pretty good. Ever think about shaping the shield of the double tap safeties to match the slide cuts?
  18. Guess they’re saving weight with the firing pin stop?
  19. Were the screws not tightened or did the loctite free technology that’s advertised not keep them tight?
  20. Just got a phone call today that they were starting on my gun. Was told it would be about 3 months. Placed my deposit mid March, so they’re right on track for the 8-10 month lead time
  21. Aren’t all 9mm glock slides roughly the same weight? If the grip works for you, I don’t see any disadvantage in CO. Glock 45 or 19x are also good options with the full size frame and compact slide.
  22. Already dremeled mine for an Odin. Not sure how far along the Tevo is, but I do think he’s said he’d look into it. The retention is pretty weak, nearly non existent, weaker than most of the kydex holsters I’ve owned like weber or rht. The ghost is probably faster to lock and unlock, but the 320 hydra I saw a couple weeks back looked to have a decent amount of movement when locked. https://i.imgur.com/Dr8XDb9.mp4
  23. Just got one for a p320 from X-ray parts in Italy. Shipping took about a week, came out to $137 shipped. Only have a few dry fire reps, so time will tell how I really feel, but I like it so far. Ball joint is nice, locks up well like their alpha X. With the knob backed out all the way, the holster still has a touch of retention. Tighten it all the way and the gun is locked in like a GX. The ball joint is mounted low enough on the holster so cutting the body for an align, Odin, or eventual Tevo “take down lever” isn’t going to take much work.
  24. Haven’t been too impressed with the newer Atlas guns. If I was in the market, I’d either be ordering a Venom or a Rafferty gun. Can’t speak much on Nighthawks since all my experience has been with single stacks, but they were nice. Might be a little faster to acquire since they’ve got a bunch of stocking dealers.
  25. Available overseas. If you select international on their website, you can add them to your cart. Unfortunately it doesn’t let you select US for the shipping.
×
×
  • Create New...