pumpedTSI Posted April 29 Share Posted April 29 24 minutes ago, Toggleme said: thats the plan if something else doesnt come up in here. Maybe go up to 2.5 lbs and see how it performs Thats the solution.....had that issue myself and thats what I did.....been fine ever since. I now run a 3.5lb trigger. Link to comment Share on other sites More sharing options...
Ajohnson15 Posted May 2 Share Posted May 2 On 4/29/2024 at 11:39 AM, Toggleme said: thats the plan if something else doesnt come up in here. Maybe go up to 2.5 lbs and see how it performs Is the little dog leg for the sear impacting the frame/chassis? It may be worth removing. additionally is the sear clearing the trigger bow completely on reset? Link to comment Share on other sites More sharing options...
Toggleme Posted May 2 Share Posted May 2 48 minutes ago, Ajohnson15 said: Is the little dog leg for the sear impacting the frame/chassis? It may be worth removing. additionally is the sear clearing the trigger bow completely on reset? I noticed the new sear spring had a dog leg while the OEM one did not. I noticed a brite spot on the dog leg but the spring felt free to move during assembly. I'll keep that in mind if the problem persists. I did not check the 2nd item you mentioned but will check it out on my next disassembly. My solution so far was to follow this procedure starting at "sear spring prep": https://feeds.brownells.com/userdocs/learn/bt002005.pdf For my existing 2lb 2oz trigger pull, i had close to 1lb 4 oz on the trigger return/disco alone. That leaves 14oz on the sear. I reduced my trigger return/disco to ~12 oz and put ~1 lb 6oz on the sear. Will report on performance after this weekend. Link to comment Share on other sites More sharing options...
Toggleme Posted May 5 Share Posted May 5 On 5/2/2024 at 1:40 PM, Toggleme said: For my existing 2lb 2oz trigger pull, i had close to 1lb 4 oz on the trigger return/disco alone. That leaves 14oz on the sear. I reduced my trigger return/disco to ~12 oz and put ~1 lb 6oz on the sear. Will report on performance after this weekend. No issues this weekend. Will continue to monitor. Link to comment Share on other sites More sharing options...
Thatpewguy Posted May 7 Share Posted May 7 On 3/20/2024 at 8:14 PM, pumpedTSI said: Any reliability issues or malfunctions since the slide cuts? Really digging it. Did you have to change the spring lbs? Link to comment Share on other sites More sharing options...
bulldog009 Posted May 9 Share Posted May 9 SIAP - A DWX Optics Ready listing - Listing Link to comment Share on other sites More sharing options...
1911vm Posted May 9 Share Posted May 9 1 hour ago, bulldog009 said: SIAP - A DWX Optics Ready listing - Listing Out of stock . LOL it will be available in 2 years . hahahaha Link to comment Share on other sites More sharing options...
Ontos Posted May 9 Share Posted May 9 (edited) 5 minutes ago, 1911vm said: Out of stock . LOL it will be available in 2 years . hahahaha I heard a rumor after the NRA show. True, two years would *technically* after the NRA show but I’m hoping for sooner. I put a back order on a railed, optics ready compact at Eurooptic so we’ll see. Edited May 9 by Ontos Spelling Link to comment Share on other sites More sharing options...
1911vm Posted May 9 Share Posted May 9 33 minutes ago, Ontos said: I heard a rumor after the NRA show. NRA show of what year? I want to make sure i start doing the math correctly Link to comment Share on other sites More sharing options...
pumpedTSI Posted May 9 Share Posted May 9 On 5/7/2024 at 12:24 PM, Thatpewguy said: Any reliability issues or malfunctions since the slide cuts? Really digging it. Did you have to change the spring lbs? Zero issues......yes, changed the recoil spring and main spring for competition ammo.... Link to comment Share on other sites More sharing options...
42ATK Posted May 9 Share Posted May 9 15 minutes ago, pumpedTSI said: Zero issues......yes, changed the recoil spring and main spring for competition ammo.... What did you change the recoil spring with Link to comment Share on other sites More sharing options...
eerw Posted May 9 Share Posted May 9 3 hours ago, bulldog009 said: SIAP - A DWX Optics Ready listing - Listing that's a little above the listed MSRP. been told will be showed in Dallas at NRA Convention. remember it will need a DW optic plate as well. Link to comment Share on other sites More sharing options...
pumpedTSI Posted May 10 Share Posted May 10 3 hours ago, 42ATK said: What did you change the recoil spring with Glock 34 flat spring Link to comment Share on other sites More sharing options...
42ATK Posted May 10 Share Posted May 10 40 minutes ago, pumpedTSI said: Glock 34 flat spring I tried that, and felt the recoil was heavier. What weight? Link to comment Share on other sites More sharing options...
pumpedTSI Posted May 10 Share Posted May 10 4 hours ago, 42ATK said: What did you change the recoil spring with Glock 34 flat spring......10lb....but my slide is over 2oz lighter than stock Link to comment Share on other sites More sharing options...
Ontos Posted May 19 Share Posted May 19 Any updates regarding the optics ready versions on display at the NRA show? There are a couple of YouTube videos but not much detail. Link to comment Share on other sites More sharing options...
extremist Posted May 20 Share Posted May 20 https://nagelsguns.net/product/dan-wesson-dwx-or-9mm-pistol-match-grade-bull-barrel-2-19rd-magazines-5-92003/ Link to comment Share on other sites More sharing options...
extremist Posted May 20 Share Posted May 20 Better pics https://www.gunbroker.com/item/1050670172 Link to comment Share on other sites More sharing options...
bulldog009 Posted May 20 Share Posted May 20 (edited) On 5/19/2024 at 10:00 AM, Ontos said: Any updates regarding the optics ready versions on display at the NRA show? There are a couple of YouTube videos but not much detail. I handled one yesterday at NRAAM - but was never given the time of day by any of the CZ/DW booth attendants. DW had its own smaller booth within the larger CZ booth, where one of the DWX OR examples was, and I stood there for several minutes with a DW rep playing on his phone in front of me, he never looked up. Edited May 20 by bulldog009 Link to comment Share on other sites More sharing options...
BMSMB Posted May 20 Share Posted May 20 3 hours ago, bulldog009 said: I handled one yesterday at NRAAM - but was never given the time of day by any of the CZ/DW booth attendants. DW had their own smaller booth within the larger CZ booth, where one of the DWX OR examples was, and I stood there for several minutes with a DW rep on his phone in front of me, he never looked up. Sounds a lot like their current customer service and shipping department... Link to comment Share on other sites More sharing options...
BMSMB Posted May 20 Share Posted May 20 Bent the ejector on the DWX over the weekend... apparently it's easy to over insert magazines and damage it. Anyone else dealt with this? Link to comment Share on other sites More sharing options...
pumpedTSI Posted May 20 Share Posted May 20 2 hours ago, BMSMB said: Bent the ejector on the DWX over the weekend... apparently it's easy to over insert magazines and damage it. Anyone else dealt with this? seems to only be a problem with extended or fully loaded mags.....been running mine in competition for a while now with flat bases and no issues.... Link to comment Share on other sites More sharing options...
kl3309 Posted May 22 Share Posted May 22 On 5/9/2024 at 4:28 PM, 1911vm said: Out of stock . LOL it will be available in 2 years . hahahaha There's one in the counter at a shop in Severn, MD. Price is $2199. Link to comment Share on other sites More sharing options...
camoy1 Posted May 22 Share Posted May 22 (edited) Was at my local gun store and they had one on the shelf. Picked it up as I had originally pre-ordered one via the old CZ military purchase program prior to COVID. Then all the crap happened and the gun didn't get released, CZ bought colt and put them in charge of CZ-USA and the new leadership re did the MIL LEO program to only have certain firearms. When it did come to market almost 4 years later I did almost buy it a couple of times, but decided to wait for the OR version. Of course the issue is now the thing doesn't come with any plates and the only available one is for the Vortex Viper/Burris FastFire. I will be looking for possible thumb rests and possibly cuts to lower the slide weight if it is too much reciprocating slide mass. Edited May 22 by camoy1 Link to comment Share on other sites More sharing options...
sandflea316 Posted June 1 Share Posted June 1 (edited) On 5/22/2024 at 7:25 AM, camoy1 said: I will be looking for possible thumb rests.... Not sure how much I can say, but there is one coming down the pipe. I been testing one out. Question for those that are interested: Will you be interested if it disable the slide lock? Personally for me i don't use the slide lock at all on my 2011 or CZ czechmate/tso(i have always removed the slide release and used the pins). The way i look at it is it's a race gun playing gun games where i don't shoot to empty anyways Second question: are you willing to fit the thumbrest and be willing to file down the thumb rest to have gun be able activate the slide lock? Edited June 1 by sandflea316 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now