eerw Posted November 5, 2017 Share Posted November 5, 2017 (edited) Here is the RDS plate system for the SP01 Shadow / 75 Shadow. able to mill the slide for interchangeable plates. For the SP01 Shadow / 75 Shadow we also have a rear sight plate that meets the guidelines for production, weight and profile. So you are able to go back to production. The plate cut can be done B model ( pistols with a firing pin block), but we do not have a rear sight plate yet for that. The plate cut is not offered for the P10, P07 and P09 ( we offer an RMR BUIS sight cut, and can mill for specific red dot sight). We are working on Shadow 2 to see if this can be offered for that CZ variant. SP01 Shadow with the rear sight plate. RMR on an SP01 Shadow using the RDS plate. Edited November 5, 2017 by eerw Link to comment Share on other sites More sharing options...
wespac78 Posted November 5, 2017 Share Posted November 5, 2017 What's the cost and the turnaround for this? Sent from my Pixel 2 XL using Tapatalk Link to comment Share on other sites More sharing options...
Blue Jacket Posted November 7, 2017 Share Posted November 7, 2017 (edited) If I have a multi-cut slide already would the plate fit to put a sight back on it?? looks nice BTW Edited November 7, 2017 by Blue Jacket Link to comment Share on other sites More sharing options...
touji Posted November 7, 2017 Share Posted November 7, 2017 It looks like it costs $205 for the cut and 1 optic plate. Has me seriously thinking about picking up a CZ... Link to comment Share on other sites More sharing options...
wespac78 Posted November 7, 2017 Share Posted November 7, 2017 I'd like to get the cut, sight plate, and plate for a Vortex Venom. Sent from my Pixel 2 XL using Tapatalk Link to comment Share on other sites More sharing options...
eerw Posted November 7, 2017 Author Share Posted November 7, 2017 On 11/5/2017 at 10:23 AM, wespac78 said: What's the cost and the turnaround for this? Sent from my Pixel 2 XL using Tapatalk we are running about 8-9 weeks on machine work. Link to comment Share on other sites More sharing options...
Rdelawder Posted November 8, 2017 Share Posted November 8, 2017 eerw, I'm thinking sending one of my shadows in for this cut and plate(s). Can I get a plate for the deltapoint pro? Second question, do I need to send the whole gun or just the slide? Link to comment Share on other sites More sharing options...
wespac78 Posted November 8, 2017 Share Posted November 8, 2017 we are running about 8-9 weeks on machine work.Cool. Season is spooling down. I'll get in touch in a couple of weeks to see about sending my slide in. Sent from my Pixel 2 XL using Tapatalk Link to comment Share on other sites More sharing options...
dogtired Posted November 8, 2017 Share Posted November 8, 2017 I just got my slide back from CZC. The pics are not as good as Stuart’s. I had it finished in Tungsten for fun. Front sight filler. Depth to plate from slide rib. Plate installed. I did have to shorten the extractor pin. Plate/slide fit. Gap does not bother me. RDS from muzzle. Link to comment Share on other sites More sharing options...
eerw Posted November 8, 2017 Author Share Posted November 8, 2017 21 hours ago, Rdelawder said: eerw, I'm thinking sending one of my shadows in for this cut and plate(s). Can I get a plate for the deltapoint pro? Second question, do I need to send the whole gun or just the slide? We have a plate for the DP Pro. we can work with just the slide. Thank you Link to comment Share on other sites More sharing options...
Tok36 Posted November 9, 2017 Share Posted November 9, 2017 That rear sight plate looks really good. Thank you for the pics. Link to comment Share on other sites More sharing options...
dogtired Posted November 9, 2017 Share Posted November 9, 2017 There is a real advantage to having multiple RDS options plus the rear sight plate. I milled a second slide but in retrospect would mill the original. Link to comment Share on other sites More sharing options...
magpulled Posted November 10, 2017 Share Posted November 10, 2017 So this is Uspsa production legal ? Link to comment Share on other sites More sharing options...
eerw Posted November 10, 2017 Author Share Posted November 10, 2017 Yes . Talked with Troy, he said my matched the profile and no change of weight he was good with it. also it is milling for a rear sight which is alllowed. Link to comment Share on other sites More sharing options...
blueorison Posted November 10, 2017 Share Posted November 10, 2017 Beautiful pictures, eerw; I just got a P09 enabled with CZC's optic cut and plate system and a CZC trigger job. Am very curious as to how it will feel. Have been shooting the P09 with irons for a little while, really like the texture and lightness of it. Now you have me thinkin about my SP01 SAO... it would be an incredibly fun gun to shoot with a dot! Link to comment Share on other sites More sharing options...
Kurusty Posted November 10, 2017 Share Posted November 10, 2017 Yes . Talked with Troy, he said my matched the profile and no change of weight he was good with it. also it is milling for a rear sight which is alllowed. [emoji4]Any idea if this reduces the weight on a Shadow 2 enough to run in carry optics?Sent from my XT1650 using Tapatalk Link to comment Share on other sites More sharing options...
touji Posted November 10, 2017 Share Posted November 10, 2017 Spoke to some good people at CZC and I will be sending in my SP-01 for trigger work and a slide mill! I cannot wait! Link to comment Share on other sites More sharing options...
mktt89 Posted November 16, 2017 Share Posted November 16, 2017 What was the cost of trigger work and what will they do Link to comment Share on other sites More sharing options...
LeviSS Posted November 16, 2017 Share Posted November 16, 2017 On 11/10/2017 at 8:36 AM, Kurusty said: Any idea if this reduces the weight on a Shadow 2 enough to run in carry optics? Sent from my XT1650 using Tapatalk I was thinking about this too and read somewhere on here that it could make weight with milling, plastic guide rod, and plastic base pads. My concerns would be that the plastic base pass would handicap your mag capacity in CO, and the milling would take away the ability to put the rear sight plate on and run it in production, either because external changes or not within weight specs. Link to comment Share on other sites More sharing options...
Kurusty Posted November 16, 2017 Share Posted November 16, 2017 I was thinking about this too and read somewhere on here that it could make weight with milling, plastic guide rod, and plastic base pads. My concerns would be that the plastic base pass would handicap your mag capacity in CO, and the milling would take away the ability to put the rear sight plate on and run it in production, either because external changes or not within weight specs.They have already clarified that the sight plate is production legal.Sent from my XT1650 using Tapatalk Link to comment Share on other sites More sharing options...
LeviSS Posted November 16, 2017 Share Posted November 16, 2017 (edited) 13 minutes ago, Kurusty said: They have already clarified that the sight plate is production legal. Sent from my XT1650 using Tapatalk I know. What I'm saying is that it is a heavy gun. It's gonna take some milling to make CO weight. If some of the milling is external, other than the sight, it is out for production. If it's all internal, then I wouldn't think it would be within the weight specs for production. I could be wrong though. I hope I am, cause I'd love a double duty gun, and much prefer the new Shadows grip to the old one. Edited November 16, 2017 by LeviSS Link to comment Share on other sites More sharing options...
touji Posted November 16, 2017 Share Posted November 16, 2017 12 hours ago, mktt89 said: What was the cost of trigger work and what will they do $170 on Safety models to install a competition hammer, 13# mainspring, and polish up internals $155 on firing pin block models to install short reset Lots of variations of the work that can be done for different models: https://czcustom.com/custom-work.html Link to comment Share on other sites More sharing options...
Dutycalls75 Posted November 23, 2017 Share Posted November 23, 2017 So has anyone tested how the plates hold zero when switching between the plates. I’m interested in potentially doing this for my Accu-Shadow, but that’s one concern. I also wish the plates were milled so that to account for where the dot sits on the plate so it looks from a distance like it he slide was specifically milled for that particular red dot. Link to comment Share on other sites More sharing options...
dogtired Posted November 24, 2017 Share Posted November 24, 2017 Its a trade off. The plate locks into the slide. The optic locks into the plate. There will be a gap, but you are not locked into a specific optic. Link to comment Share on other sites More sharing options...
touji Posted November 26, 2017 Share Posted November 26, 2017 Hey Stuart, Do you know if there is a difference in mill height between a FPB model SP-01 and a Shadow? I'm looking for a backup for my SP-01 (FPB) and I'm wondering if I can pick up a Shadow if I find one for a good deal. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now