want2race Posted November 5, 2015 Share Posted November 5, 2015 I'm a hinge trigger fan. This is not just a redo of 10 year old tech. Significant changes were made to create what I think is the best trigger on the market. Single stage or two stage capable. I can go from 1.3# to 3# trigger pull without changing sear spring tension. Developed for accuracy sports but I also run them in my Limited gun and L10 1911. I can tune the feel and break to any preference, amazingly accurate feel. Since the hinge is not allowed in SS division, there is another alternative. A two piece trigger that allows for more adjustment than regular slide triggers. Change the shape or length of pull (or both) as the bow has a threaded shaft that the trigger shoe screws onto. The bow is not too long, like I have found with other triggers. Mine dropped straight into my Springfield frame with no more play than the trigger I pulled out (STI blank). I prefer a reverse curve trigger and Christoph nailed it! Both styles available for both 1911 and 2011's. I'm not a dealer, just a fan of them. Link to comment Share on other sites More sharing options...
want2race Posted November 5, 2015 Author Share Posted November 5, 2015 The trigger shoe comes smooth so I serrated it 20lpi. Link to comment Share on other sites More sharing options...
Bud White Posted November 5, 2015 Share Posted November 5, 2015 Where do you get one Sent from my SCH-I545 using Tapatalk Link to comment Share on other sites More sharing options...
want2race Posted November 5, 2015 Author Share Posted November 5, 2015 I don't think he has the slide triggers on his site yet, but the X-line's are here: http://shop.xline-geppert.de/en/x-line-trigger/8-x-line-trigger.html Met Christoph at the Bianchi cup this year and picked up a few of them. Actually, the group that I went with bought the last he had on hand. As a "better mousetrap" guy, as soon as I saw the hinge style trigger I HAD to have one. LOL. Link to comment Share on other sites More sharing options...
Punished Posted November 5, 2015 Share Posted November 5, 2015 (edited) How does the hinge actually work? That does not feel weird with it hinging first before pulling to the rear? ok, editing now that I saw the video on how it works. I see you drill a set screw through the bottom to keep it from sliding. Interesting concept, I enjoy a sliding trigger over a hinge though. Edited November 5, 2015 by Punished Link to comment Share on other sites More sharing options...
EngineerEli Posted November 5, 2015 Share Posted November 5, 2015 Do you have a pic of the hinged trigger out of the gun? Link to comment Share on other sites More sharing options...
PatJones Posted November 5, 2015 Share Posted November 5, 2015 Since the hinge is not allowed in SS division, there is another alternative. Please quote the rule that bans hinged triggers in single stack. Link to comment Share on other sites More sharing options...
warpspeed Posted November 5, 2015 Share Posted November 5, 2015 $150 for a trigger ? I will pass. Link to comment Share on other sites More sharing options...
usmc1094 Posted November 5, 2015 Share Posted November 5, 2015 Really isn't that bad if it is a drop in. If you look at the drop ins for the glock, m&p, and xd's its right on par. Link to comment Share on other sites More sharing options...
want2race Posted November 5, 2015 Author Share Posted November 5, 2015 You got me on the rules. I was going off memory, which has been declining lately. I will recheck, but I thought it was in there as specifically prohibited. Looking now. It's not for everyone, that is true. Just like how I won't spend $125 on tuned 2011 magazines. I installed my first one in my Bianchi gun. It is very, very easy to shoot the gun well now. When I'm shooting it I don't notice that the trigger hinges at the top. Still feels like a flat trigger. The best way I can describe is like this: Pull the take up on your current trigger and stop when it stacks on the sear. This is the resting position of the X-line trigger. Now pull the trigger so that the sear only moves 2/3rds of the way off the hammer hook, this is the first stage of the X-line. This position is when the hinge trigger hits the spring plunger (black plunger in pic). The added spring tension gives a second stage, usually an additional 1/2 pound but it's adjustable. Continue and the hammer falls. All of the slack and movement in the trigger is gone. I'm pretty good at trigger jobs and removed a 2.10#, Bianchi legal trigger set up that I really liked. Felt really good on the set up and break. Once I got this dialed in, this one is even better. I tried setting up my Limited gun with just a single stage. I used a stiff spring in the black plunger and set it up as a trigger stop. I didn't trust my self, so I changed it back to a traditional feeling two stage. For Bullseye, Action Pistol etc. I think these will be more popular than for USPSA. Just wanted to share. Link to comment Share on other sites More sharing options...
MGMorden Posted November 5, 2015 Share Posted November 5, 2015 Really isn't that bad if it is a drop in. If you look at the drop ins for the glock, m&p, and xd's its right on par. Usually those "Triggers" are a whole collection of parts though - connectors, springs, sears, etc. This is JUST the trigger - and ironically none of the stuff (sear, hammer, etc) that really effect what differentiates a good trigger from a bad. Link to comment Share on other sites More sharing options...
CHA-LEE Posted November 5, 2015 Share Posted November 5, 2015 I can see this new trigger being a nightmare to setup in a 2011 where the trigger is in the plastic grip and the sear/hammer is in the frame. With plastic 2011 grips there will always be grip on frame movement while shooting and this movement needs to be accounted for when setting up the Pre/Over travel of the trigger bow. If this new trigger eliminates all of the excessive Pre/Over travel then the depth of sear engagement will be all over the place as the plastic grip moves around while shooting. For 1911's that have the grip and frame as one solid piece of metal this trigger would be great. But for a two piece Frame/Grip setup of a 2011, I don't think it would be very reliable. Even Metal grips on 2011 frames move around while shooting so switching to a metal grip wouldn't "Solve" the two piece movement issue. Link to comment Share on other sites More sharing options...
usmc1094 Posted November 5, 2015 Share Posted November 5, 2015 Really isn't that bad if it is a drop in. If you look at the drop ins for the glock, m&p, and xd's its right on par. Usually those "Triggers" are a whole collection of parts though - connectors, springs, sears, etc. This is JUST the trigger - and ironically none of the stuff (sear, hammer, etc) that really effect what differentiates a good trigger from a bad. https://www.glockstore.com/pyramid-2001h Looks about the same to me. Tigger bar and shoe Link to comment Share on other sites More sharing options...
want2race Posted November 5, 2015 Author Share Posted November 5, 2015 Cha-lee, I understand your point as I've long known the difficulties of setting up 2011's for sub 2# triggers (not recommended) compared to 1911's. I've installed an X-line in both a plastic and an aluminum grip. The secondary sear angle is removed (or not added if starting with a new sear). My 2011 set up has more sear/hammer engagement and stronger sear spring tension than the previous set up. I did a LOT of testing and tuning on what changes effect what and why. Tried some different things along the way. Link to comment Share on other sites More sharing options...
Dranoel Posted November 7, 2015 Share Posted November 7, 2015 Actually the one one the far right in the second pic is very interesting. But I didn't see it on the site listed by want2race. Is there more info on that? Can I get it for a Caspian Hi-Cap? Link to comment Share on other sites More sharing options...
StraightSh00ter Posted November 8, 2015 Share Posted November 8, 2015 I'm glad someone is working on new trigger options. I find there are surprisingly few given the history of the 1911. I think the reverse crown or whatever its called looks awesome, and I want to try a hinged trigger some day. I am a little skeptical of the threaded trigger shoe attachment though. Link to comment Share on other sites More sharing options...
Chutist Posted November 12, 2015 Share Posted November 12, 2015 I'm glad someone is working on new trigger options. I find there are surprisingly few given the history of the 1911. I think the reverse crown or whatever its called looks awesome, and I want to try a hinged trigger some day. I am a little skeptical of the threaded trigger shoe attachment though. My take is there aren't many options because it was right in the first place... I'm all for innovation but the hinge trigger looks like a solution in search of a problem. Link to comment Share on other sites More sharing options...
want2race Posted April 15, 2016 Author Share Posted April 15, 2016 Update: I used an X-line in my limited gun and managed to win HOA at MD state last year. It's held up to my death grip trigger finger quite well. Still liking it a bunch. Bianchi gun continues to impress people that try it out. The slide triggers are available now. I haven't had any issues with mine so far. I'm running my koncave trigger screwed all the way in, short as it goes. Link to comment Share on other sites More sharing options...
usmc1094 Posted April 15, 2016 Share Posted April 15, 2016 Did you have to do any fitting? Link to comment Share on other sites More sharing options...
Sandbagger123 Posted April 15, 2016 Share Posted April 15, 2016 if they can make one that will mimic the short flat SVI that would be a killer. the ones they have seem to be long Link to comment Share on other sites More sharing options...
want2race Posted April 15, 2016 Author Share Posted April 15, 2016 There is fitting for the hinge. It will be a gunsmith fit for most. I had a teammate take some material off the back of one of the trigger shoes (slide trigger), then screw it back onto the threaded post. Made it about 1/8" shorter. Link to comment Share on other sites More sharing options...
scooterj Posted April 15, 2016 Share Posted April 15, 2016 Because of the design of the Vario-trigger, shape and length are only limited by your imagination and skill level. Link to comment Share on other sites More sharing options...
scooterj Posted April 20, 2016 Share Posted April 20, 2016 Two of the same X-Line Convex Vario triggers. The shoe on the left has had material removed from the base of the shoe and is screwed all the way onto the stud. The trigger on the right is in modified and there is another 3/16" to 1/4" of stud remaining before the shoe contacts the bow. Length can be adjusted by about 1/2". Link to comment Share on other sites More sharing options...
kimberacp Posted April 22, 2016 Share Posted April 22, 2016 scooterj, where can we get the Vario triggers??? Link to comment Share on other sites More sharing options...
scooterj Posted April 22, 2016 Share Posted April 22, 2016 You'll need to order direct from Christoph. There is no US distributor, yet. He's in Germany but his shipping rates are great. http://shop.xline-geppert.de/en/14-x-line-vario-trigger Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now