AzShooter Posted December 27, 2014 Share Posted December 27, 2014 Just got my 929 and it needs work. Double action is 15 lbs,single action is 6 lbs. Hand has tool marks hammer needs to be cleaned up. Trigger needs polishing and rebound spring needs replacement. Then the cylinders need to be champfered. I;m having a difficult time using my screwdriver so I think I'll leave everything apart until my arm heals. No scence screwing up th gun At least I'll be able to waet for new tools. Fun...fun...fun. Link to comment Share on other sites More sharing options...
mwx40x40 Posted December 28, 2014 Share Posted December 28, 2014 At least S&W is consistent. Almost everyone that seems to be getting one of these "custom shop 929" guns is displeased with fit, finish, action, etc. I have only handled three and all three were not what I was expecting. S&W seems to falling in line with every other manufacture where the price is riding off the coat tales of their history, but current production techniques and QA are in line with low cost manufacturing and high price marketing. However, I am sure once you get the bugs out and action worked over it will be a sweet blaster. Link to comment Share on other sites More sharing options...
Gregg K Posted December 28, 2014 Share Posted December 28, 2014 They are still good kits for building a competitive shooter. My expectations are usually pretty low so I won't be as disapointed. I view them all as "kit" guns. I can see where it would be pretty frustrating if you aren't the type that likes to tinker and fix and just want to buy a good shooter. Link to comment Share on other sites More sharing options...
Carmoney Posted December 28, 2014 Share Posted December 28, 2014 The old S&Ws weren't much better. They had nicer external finish back then, but plenty of ratchety machine marks inside. Generally, the newer guns tune up easier. Link to comment Share on other sites More sharing options...
PatJones Posted December 28, 2014 Share Posted December 28, 2014 The old S&Ws weren't much better. They had nicer external finish back then, but plenty of ratchety machine marks inside. Generally, the newer guns tune up easier. That's been my experience too. It's easy to forget that a lot of the old guns we buy have been fixed already. Link to comment Share on other sites More sharing options...
bountyhunter Posted December 28, 2014 Share Posted December 28, 2014 They are still good kits for building a competitive shooter. My expectations are usually pretty low so I won't be as disapointed. I view them all as "kit" guns. I would be OK with that if their PC didn't charge about 50% extra for their "performance quality tune" and then sell you a dog that needs a ton of work. Link to comment Share on other sites More sharing options...
Carmoney Posted December 29, 2014 Share Posted December 29, 2014 There's nothing on the market to compete with S&W's 8-shot revolvers. They would presumably do a better job building them if they had any competitive pressure. Link to comment Share on other sites More sharing options...
3gunyotehtr Posted December 29, 2014 Share Posted December 29, 2014 Come on! Everybody knows Taurus makes top notch revolvers! Link to comment Share on other sites More sharing options...
Toolguy Posted December 29, 2014 Share Posted December 29, 2014 I have heard it is not so hard to do an action job on a single shot with only one hand. Link to comment Share on other sites More sharing options...
polymerfeelsweirdman Posted December 29, 2014 Share Posted December 29, 2014 There's nothing on the market to compete with S&W's 8-shot revolvers. They would presumably do a better job building them if they had any competitive pressure. They should just rename revolver division to Smith and Wesson division Link to comment Share on other sites More sharing options...
blind bat Posted December 29, 2014 Share Posted December 29, 2014 I have heard it is not so hard to do an action job on a single shot with only one hand. I practiced the one handed, single shot action job all thoughout high school and into college. Link to comment Share on other sites More sharing options...
Petrov Posted December 29, 2014 Share Posted December 29, 2014 I have heard it is not so hard to do an action job on a single shot with only one hand. I practiced the one handed, single shot action job all thoughout high school and into college. Link to comment Share on other sites More sharing options...
stardust tommy Posted January 6, 2015 Share Posted January 6, 2015 I have a 929 for a customer and have some problems... comp is damaged, front sight is damaged, action feels like it is filled with sand, gun won't fire DA loaded, there is a lot of play between the extractor rod and the cilinder... I had to stone the hand a little smaller so it wil fire DA with rounds in the cilinder. without the rounds 1 chamber is out of timing, with 8 rounds the timing is right... lots of play in the extractor. I noticed there are no alignment pins anymore on the extractor/cylinder like my old 686, mod 10, mod 66... for me PC stands for poor customer instead of Performance Center gr T Link to comment Share on other sites More sharing options...
jerichrome Posted January 13, 2015 Share Posted January 13, 2015 Mine looks to be quite good, action was not very smooth, but a little stoning did the job, hand also needed some work but the timing was good. Only serious problem is that mine is pretty unique, they forgot Jerry's signature on the sideplate. Link to comment Share on other sites More sharing options...
revoman Posted January 13, 2015 Share Posted January 13, 2015 Maybe Jerry was tired that day. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now