Yagi Posted November 10, 2014 Share Posted November 10, 2014 I am fortunate enough to be squadded with Henning. He asked me what parts do we need for our Tanfoglio's.... I relayed the typical item i know people are looking such as magwells, grips, ....... What else? Hammer? Interuptor? Trigger ??? Link to comment Share on other sites More sharing options...
kneelingatlas Posted November 10, 2014 Share Posted November 10, 2014 Sears, safeties Link to comment Share on other sites More sharing options...
e-mishka Posted November 10, 2014 Share Posted November 10, 2014 henning has most of the parts that I need designed. he just need to keep making them Link to comment Share on other sites More sharing options...
chuck s Posted November 10, 2014 Share Posted November 10, 2014 Why not a disco that gets rid of the pretravel on these guns, like the ones for CZs? Link to comment Share on other sites More sharing options...
chuck s Posted November 10, 2014 Share Posted November 10, 2014 And more grips for large frame guns Link to comment Share on other sites More sharing options...
cvincent Posted November 10, 2014 Share Posted November 10, 2014 Aluminum grips that are stock wood grip size/width. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Intercooler2 Posted November 10, 2014 Share Posted November 10, 2014 Some different grip panel options (and stock). Perhaps a one piece guide-rod for a Hunter. Link to comment Share on other sites More sharing options...
BeerBaron Posted November 10, 2014 Share Posted November 10, 2014 Need him to make more of the stainless replacement bushings for the cone barrel models. He hasn't had those for ages. Link to comment Share on other sites More sharing options...
BeerBaron Posted November 10, 2014 Share Posted November 10, 2014 A drop in slide racker for gold team with a detent in the racker so that we just drill a dimple in the factory dovetail. And make one long enough to clear sideways mounted cmores and still have the racker on the left. Link to comment Share on other sites More sharing options...
cpa5oh Posted November 10, 2014 Share Posted November 10, 2014 I'll second the interrupter that removes pre-travel. Link to comment Share on other sites More sharing options...
Open1215 Posted November 10, 2014 Share Posted November 10, 2014 Threaded barrel / comp system would be awesome. 9/38. Even a .355 short chamber. 170mm base pads / extensions for large frame. Link to comment Share on other sites More sharing options...
chowtime Posted November 11, 2014 Share Posted November 11, 2014 yes large frame grips Link to comment Share on other sites More sharing options...
Goldenmotors Posted November 11, 2014 Share Posted November 11, 2014 I 3rd interrupter. The CZ one is too hard to drill to make work. One one that I actually got to work make a world of a difference. We really need one of these for our guns. Link to comment Share on other sites More sharing options...
BeerBaron Posted November 11, 2014 Share Posted November 11, 2014 Threaded barrel / comp system would be awesome. 9/38. Even a .355 short chamber. 170mm base pads / extensions for large frame. oooh I like that idea. drop in barrel/comp for limiteds and/or gold customs. replace the V8 or V12 with a more traditional comp and maybe just a V4 (4 port holes, 2 on each side to line up with the factory coffin cuts). Link to comment Share on other sites More sharing options...
Yagi Posted November 11, 2014 Author Share Posted November 11, 2014 I have sent Henning this topic link so he can read it... I'm sure he would chime in when time comes. He was pretty excited when talking about new parts for Tanfo.... He showed me some new extended mag basepad for open/ limited... i stressed the interruptor and a new hammer system...i believe he is currently or about to do grips... Link to comment Share on other sites More sharing options...
Guest Posted November 11, 2014 Share Posted November 11, 2014 (edited) Threaded barrel / comp system would be awesome. 9/38. Even a .355 short chamber. 170mm base pads / extensions for large frame. oooh I like that idea. drop in barrel/comp for limiteds and/or gold customs. replace the V8 or V12 with a more traditional comp and maybe just a V4 (4 port holes, 2 on each side to line up with the factory coffin cuts). Another +1 for this idea. I never really got why Tanfoglio was so committed to the v8/v12 barrel format on their open guns. An offering with a well thought out traditional cone comp design (or two) where the user can decide if they want barrel holes or not would be welcomed. Also, the idea of offering barrels is a great one and long overdue. Maybe work with a company like Briley and get some 6" .355 short chambered barrels. Henning could ream/cut to length/thread to spec upon the customer's request at purchase, or the customer could ream/cut/thread the barrel. Hopefully at a cost that is more in line with reality vs what EAA is offering. Edited November 11, 2014 by Bamboo Link to comment Share on other sites More sharing options...
mwc Posted November 11, 2014 Share Posted November 11, 2014 (edited) Definitely large frame grips that are thinner than the stock wood and thicker than EG grips. Edited November 11, 2014 by mwc Link to comment Share on other sites More sharing options...
kneelingatlas Posted November 11, 2014 Share Posted November 11, 2014 Threaded barrel / comp system would be awesome. 9/38. Even a .355 short chamber. 170mm base pads / extensions for large frame. oooh I like that idea. drop in barrel/comp for limiteds and/or gold customs. replace the V8 or V12 with a more traditional comp and maybe just a V4 (4 port holes, 2 on each side to line up with the factory coffin cuts). Another +1 for this idea. I never really got why Tanfoglio was so committed to the v8/v12 barrel format on their open guns. An offering with a well thought out traditional cone comp design (or two) where the user can decide if they want barrel holes or not would be welcomed. Also, the idea of offering barrels is a great one and long overdue. Maybe work with a company like Briley and get some 6" .355 short chambered barrels. Henning could ream/cut to length/thread to spec upon the customer's request at purchase, or the customer could ream/cut/thread the barrel. Hopefully at a cost that is more in line with reality vs what EAA is offering. I didn't realize we were talking custom comps here!?! Now you're speaking my language! I've talked to a handful of smiths about a drop in barrel comp setup for the Limited, heard lots of excitement, but never had anything pan out. Henning, if you're listening I'm in Link to comment Share on other sites More sharing options...
Steffes Posted November 11, 2014 Share Posted November 11, 2014 Mags that function and fit the box for limited 40 loaded long. Link to comment Share on other sites More sharing options...
kneelingatlas Posted November 11, 2014 Share Posted November 11, 2014 Mags that function and fit the box for limited 40 loaded long. I think you might be the only one who doesn't like the K40s Link to comment Share on other sites More sharing options...
BrazeauRacing Posted November 11, 2014 Share Posted November 11, 2014 i believe he is currently or about to do grips... Excited! Link to comment Share on other sites More sharing options...
MOUNTAINWILLIAM Posted November 11, 2014 Share Posted November 11, 2014 How about a roller top trigger bar guide while we're at it? Link to comment Share on other sites More sharing options...
cpa5oh Posted November 11, 2014 Share Posted November 11, 2014 (edited) I 3rd interrupter. The CZ one is too hard to drill to make work. One one that I actually got to work make a world of a difference. We really need one of these for our guns. Don't drill it - use one of those diamond coated dremel tips...ate through mine like butter. Think I got ten of the bits at Harbor Freight for $5 or something ridiculous. Still don't like having half-assed stuff that I did in my garage in my guns, though, which is why I'd like some real components to come out. Edited November 11, 2014 by cpa5oh Link to comment Share on other sites More sharing options...
bayougump Posted November 11, 2014 Share Posted November 11, 2014 The grips that are thinner than the stock wood grips but thicker than the EG grips would be awesome, especially if they were aluminum grips. I also wouldn't mind seeing some different barrel/comp options for the Tanfo open guns. Link to comment Share on other sites More sharing options...
Iggy42 Posted November 12, 2014 Share Posted November 12, 2014 Heck I would love it if someone offered Limiteds (and perhaps Gold Teams if they need it) already tweaked and tuned for those of us that just want to shoot and not work on our stuff outside of normal cleaning/maintance Especially if it was a package deal that included some mags Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now