dskinsler83 Posted May 28, 2014 Share Posted May 28, 2014 Maybe that is the difference I dunno I just got one that fits the small frame GLOCK Link to comment Share on other sites More sharing options...
rowdyb Posted May 29, 2014 Author Share Posted May 29, 2014 my gen3 g34 belt holster from comp-tac is what my gen4 g41 fits in just great. Link to comment Share on other sites More sharing options...
atbarr Posted June 16, 2014 Share Posted June 16, 2014 All of my Glocks have Glockworz triggers, there OK. I have the least expensive in the majority of my Glocks, except I have the Ultimate in my G34 set up for Limited. But in my new G41 I installed the DK CUSTOM KIT trigger https://www.glockcustomtriggers.com/products.html. This is absolutely the finest trigger I have ever felt in a Glock, and I've owned or own quite a few. Very little pre-travel and short reset. And, it is $70.00 less than the GlockWorz. Just like a kid, you can't beat Daniel's triggers. Link to comment Share on other sites More sharing options...
dskinsler83 Posted June 16, 2014 Share Posted June 16, 2014 Thank you AT!! I appreciate that! Link to comment Share on other sites More sharing options...
Cuz Posted July 29, 2014 Share Posted July 29, 2014 I'm shooting a 230gr plated extreme bullet over 4.4 of titegroup. Rowdyb, have you chronod this load in your G41 yet? I'd like to know what velocity your getting with that load. Thanks, Cuz. Link to comment Share on other sites More sharing options...
lawboy Posted September 19, 2014 Share Posted September 19, 2014 Anyone find a magwell for the G41? Link to comment Share on other sites More sharing options...
dskinsler83 Posted September 19, 2014 Share Posted September 19, 2014 Anyone find a magwell for the G41? Carvers has had one. Any Gen4 21 one will fit Link to comment Share on other sites More sharing options...
Joe D Posted September 19, 2014 Share Posted September 19, 2014 (edited) I have owned a G41 for several months now. The LWD guide rod works best if you can't make your own. I run mine at a 130PF for ESP. Of course it has the "world famous Joe Day trigger job". It runs 200 gr LSWC with no issues. I had to heat the end of my kydex holster just a bit to get it to fit. Holster still works fine for G34 and 35. The G41 weighs between my 34 and 35. Edited September 19, 2014 by Joe D Link to comment Share on other sites More sharing options...
Aircooled6racer Posted September 25, 2014 Share Posted September 25, 2014 Hello: So who makes a Glock 41 aluminum magwell I can cut down for IDPA to fit the box? Thanks, Eric Link to comment Share on other sites More sharing options...
Joe D Posted September 25, 2014 Share Posted September 25, 2014 Eric, the stock mag opening is big enough to throw a mag in from 6 feet. Link to comment Share on other sites More sharing options...
Aircooled6racer Posted September 25, 2014 Share Posted September 25, 2014 Hello: I guess I will have to check one out in person then. Thinking it would be a great CDP/ESP/SSP gun. If it fits a G34 holster as you all have suggested then I will just have to get some pouches and a gun. Thanks, Eric Link to comment Share on other sites More sharing options...
Whitefish Posted September 25, 2014 Share Posted September 25, 2014 Carver Custom makes an aluminum magwell that fits the Gen 4 Glock 20, 21, and 41. Link to comment Share on other sites More sharing options...
Gooldylocks Posted September 26, 2014 Share Posted September 26, 2014 Does anyone have a 41 setup for Limited/L10 that they can post some pictures of? In theory you get 17+1 with basepads right? Wouldn't be ideal for Limited but my dad really likes 45 and maybe it would be a cool way to get him hooked. Link to comment Share on other sites More sharing options...
lawboy Posted September 28, 2014 Share Posted September 28, 2014 Yes. I have one. Full ZEV build. Nickel boron slide and barrel. Blade-Tech comp. Holster on BOSS hanger. ARREDONDO base pads give 17 reloadable. Here I am doing a little dry fire with it and goofing around. http://m.youtube.com/watch?v=8yBvau_IMEY Link to comment Share on other sites More sharing options...
Gooldylocks Posted September 29, 2014 Share Posted September 29, 2014 That is a sweet looking blaster! How do you like it, and do you feel disadvantaged against the 40 shooters? 18 rounds at the start doesn't seem too bad... Link to comment Share on other sites More sharing options...
lawboy Posted September 29, 2014 Share Posted September 29, 2014 (edited) I enjoy the gun; it is fun and very accurate. It shoots cast bullets very well! I have not shot a match with it yet but I have practiced a bit on the clock. Splits will be a tad slower on close shots but that may just be a glock v. 2011 thing. Nobody makes a magwell so that sucks but not a big deal. Gun uses #15 ISMI spring. I will post more when I know more. Edited September 29, 2014 by lawboy Link to comment Share on other sites More sharing options...
Gooldylocks Posted September 29, 2014 Share Posted September 29, 2014 Glad to hear you like it. I will let my dad know, maybe he will give one a try! I think I read on one of the other threads that carver makes one of the big mouth magwells for the G41 and 21 gen 4. So that could be an option. Thanks! Link to comment Share on other sites More sharing options...
lawboy Posted September 29, 2014 Share Posted September 29, 2014 (edited) Carver, thanks, I will check them out. I would love to get a magwell for it. Edited September 29, 2014 by lawboy Link to comment Share on other sites More sharing options...
Nick Weidhaas Posted November 20, 2014 Share Posted November 20, 2014 I just picked up one of these...shot my buddy's G41 with 3.5 connector and 4lb firing pin spring and it was pretty sweet. He is a big .45 Glock shooter and has all types of G21's in different configurations (he made USPSA Limited M w/ a G21). Anyways, I could definetly tell the G41 was slimmer in the grip area w/ no backstrap installed compared to his G21's. When I went to the Glock Armorer school this year, the instructor said the Gen4 G21 / G41 is slightly thinner than the G21SF when no back strap is used on the Gen4. I believe it. The G41 was really accurate with 230gr fmj. I picked one up and ordered the Lone Wolf Gen4 adapter plug and their guide rod, a set of Sevigny sights (.245 front- not sure if that is going to be to high) and grip tape. My buddy does awesome trigger work on Glocks (best I have every felt and I've felt quite a few), so he will do the trigger. I want to try this in production/ssp and maybe L10. I've been a long time G22 / G35 shooter, but never really liked .40. Its soft in minor, but I find .40 just too snapy. Love the pulse of a .45, even at major, over .40. I'll post a review when I get it put together and decide on a load. Shoot well. Link to comment Share on other sites More sharing options...
GlockCanMan Posted December 14, 2014 Share Posted December 14, 2014 So I have read that several people have changed their recoil springs, but what guide rod are you using? Link to comment Share on other sites More sharing options...
dskinsler83 Posted December 14, 2014 Share Posted December 14, 2014 The springco one I got to feel in a customers G41 was pretty nice feeling costly though but very nice Link to comment Share on other sites More sharing options...
Joe D Posted December 15, 2014 Share Posted December 15, 2014 Lone Wolf makes one. Link to comment Share on other sites More sharing options...
Keydet08 Posted January 6, 2015 Share Posted January 6, 2015 Does anyone know if the TTI base pads are compatible with the carver magwell? Thanks... Link to comment Share on other sites More sharing options...
dskinsler83 Posted January 6, 2015 Share Posted January 6, 2015 Should be yes Link to comment Share on other sites More sharing options...
Stician Posted March 5, 2015 Share Posted March 5, 2015 So is consensus on G41 among members here a positive one? Thinking about getting it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now