Tom C Posted May 13, 2013 Share Posted May 13, 2013 I've been away from IDPA for some time and am coming back next month. Question about topping off (or the Barney round if yall prefer). Is there a problem with 1 and only 1 mag being loaded with 11 rounds so once the mag is seated and the slide cycled you are topped off and have 10 in the mag? Link to comment Share on other sites More sharing options...
dskinsler83 Posted May 13, 2013 Share Posted May 13, 2013 Not that I recall Link to comment Share on other sites More sharing options...
blueorb Posted May 13, 2013 Share Posted May 13, 2013 No, that is the only way that I load and make ready. I personally find using a barney mag unnecessary and distracting when making ready. That's just my humble opinion. Link to comment Share on other sites More sharing options...
Chuck D Posted May 13, 2013 Share Posted May 13, 2013 Barney mags are a necessity for those of us living and shooting in capacity restricted States. Other than that, I'd load and make ready with 11 rounds in a magazine. Link to comment Share on other sites More sharing options...
Rob Tompkins Posted May 13, 2013 Share Posted May 13, 2013 If your mags are >10 rnd capacity that is the only practical way to do it. Link to comment Share on other sites More sharing options...
45 Raven Posted May 13, 2013 Share Posted May 13, 2013 Agreed. I load a 17-round mag with 111 rounds and start each stage that way, followed by 10-round mags on the belt. Easy, simple, and as the man said: practical. Link to comment Share on other sites More sharing options...
Tom C Posted May 13, 2013 Author Share Posted May 13, 2013 Thanks for the input. Since I'm coming over from USPSA I didn't want to bring any baggage that might be a problem. I agree about the practicle nature of loading 11 in the states where allowed. I do have a passel of 10 rounders from the Federal ban days so I'm prepared should something foolish happen. Link to comment Share on other sites More sharing options...
Jim Watson Posted May 13, 2013 Share Posted May 13, 2013 I suggest you mark your leadoff magazine with 11 to distinguish it from reload magazines containing 10. A paster on the floorplate will do well enough. My Plastic M&P has a couple of rusted magazines from The Incident's house fire and I LAMR with them, figuring they will be less of a loss if stepped on than the nice black stainless mags unhurt by the fumes and water. Link to comment Share on other sites More sharing options...
bigdawgbeav Posted May 13, 2013 Share Posted May 13, 2013 When I first started IDPA I was using my 1911, so I always had a Barney in the pocket. Now that I'm shooting a double-stack I have no need for the Barney. However, to avoid confusion I load all my mags to division capacity (8 rounds). This way I know that what's getting stored in the pouches are correct and I grab the 3rd for LAMR and drop in a 9th round. That goes in the pocket. When I step to the line, I check the first mag and verify 9 and verify 8 in the other 2. Link to comment Share on other sites More sharing options...
Tom C Posted May 13, 2013 Author Share Posted May 13, 2013 I suggest you mark your leadoff magazine with 11 to distinguish it from reload magazines containing 10. A paster on the floorplate will do well enough. My Plastic M&P has a couple of rusted magazines from The Incident's house fire and I LAMR with them, figuring they will be less of a loss if stepped on than the nice black stainless mags unhurt by the fumes and water. I was shooting USPSA so I did mark the basepads of my 11 rounders.. Your idea is a very good one as I've seen a number of shooters fumbling...AT THE LINE...because they grabbed the wrong mag(s). Link to comment Share on other sites More sharing options...
blueorb Posted May 14, 2013 Share Posted May 14, 2013 I suggest you mark your leadoff magazine with 11 to distinguish it from reload magazines containing 10. A paster on the floorplate will do well enough. My Plastic M&P has a couple of rusted magazines from The Incident's house fire and I LAMR with them, figuring they will be less of a loss if stepped on than the nice black stainless mags unhurt by the fumes and water. I was shooting USPSA so I did mark the basepads of my 11 rounders.. Your idea is a very good one as I've seen a number of shooters fumbling...AT THE LINE...because they grabbed the wrong mag(s). I bought the blue base plates for this very purpose. Now, there is no need to even think twice. Blue base plate is 11 rounds and all others are 10 rounds. Link to comment Share on other sites More sharing options...
Tom C Posted May 15, 2013 Author Share Posted May 15, 2013 I suggest you mark your leadoff magazine with 11 to distinguish it from reload magazines containing 10. A paster on the floorplate will do well enough. My Plastic M&P has a couple of rusted magazines from The Incident's house fire and I LAMR with them, figuring they will be less of a loss if stepped on than the nice black stainless mags unhurt by the fumes and water. I was shooting USPSA so I did mark the basepads of my 11 rounders.. Your idea is a very good one as I've seen a number of shooters fumbling...AT THE LINE...because they grabbed the wrong mag(s). I bought the blue base plates for this very purpose. Now, there is no need to even think twice. Blue base plate is 11 rounds and all others are 10 rounds. Cool...I'm a red kinda guy...do the come in red? Link to comment Share on other sites More sharing options...
blueorb Posted May 16, 2013 Share Posted May 16, 2013 I suggest you mark your leadoff magazine with 11 to distinguish it from reload magazines containing 10. A paster on the floorplate will do well enough. My Plastic M&P has a couple of rusted magazines from The Incident's house fire and I LAMR with them, figuring they will be less of a loss if stepped on than the nice black stainless mags unhurt by the fumes and water. I was shooting USPSA so I did mark the basepads of my 11 rounders.. Your idea is a very good one as I've seen a number of shooters fumbling...AT THE LINE...because they grabbed the wrong mag(s). I bought the blue base plates for this very purpose. Now, there is no need to even think twice. Blue base plate is 11 rounds and all others are 10 rounds. Cool...I'm a red kinda guy...do the come in red? What gun are you shooting? If a Glock, I have only seen the black, blue and orange. See here : http://www.lonewolfdist.com/Products.aspx?CAT=190 Link to comment Share on other sites More sharing options...
Tom C Posted May 17, 2013 Author Share Posted May 17, 2013 I suggest you mark your leadoff magazine with 11 to distinguish it from reload magazines containing 10. A paster on the floorplate will do well enough. My Plastic M&P has a couple of rusted magazines from The Incident's house fire and I LAMR with them, figuring they will be less of a loss if stepped on than the nice black stainless mags unhurt by the fumes and water. I was shooting USPSA so I did mark the basepads of my 11 rounders.. Your idea is a very good one as I've seen a number of shooters fumbling...AT THE LINE...because they grabbed the wrong mag(s). I bought the blue base plates for this very purpose. Now, there is no need to even think twice. Blue base plate is 11 rounds and all others are 10 rounds. Cool...I'm a red kinda guy...do the come in red? What gun are you shooting? If a Glock, I have only seen the black, blue and orange. See here : http://www.lonewolfdist.com/Products.aspx?CAT=190 Yep...Glock 19. Guess Orange is not completely outta the question. (just kidding. Orange will make finding that mag pretty easy) Link to comment Share on other sites More sharing options...
Paul-the new guy Posted May 18, 2013 Share Posted May 18, 2013 I barney up no matter what division I am shooting. Since IDPA has no individual walk throughs... using a barney to load and make ready gives me an extra minute to look over the stage from the start position and maybe one more chance to run through it in my head before the action starts. Link to comment Share on other sites More sharing options...
RGinIdaho Posted May 18, 2013 Share Posted May 18, 2013 I barney up no matter what division I am shooting. Since IDPA has no individual walk throughs... using a barney to load and make ready gives me an extra minute to look over the stage from the start position and maybe one more chance to run through it in my head before the action starts. Yup, Then you stick the Barney mag in the strong side pocket of the vest. So you don't make the mistake of using the wrong mag on a reload. Link to comment Share on other sites More sharing options...
stick Posted May 26, 2013 Share Posted May 26, 2013 I use the same gun in IDPA and USPSA. I highlighted the 10 with white crayon on each magazine so I can quickly see how many rounds are in each magazine. My first magazine has 11 rounds in it which is kept in my strong side pocket. Link to comment Share on other sites More sharing options...
babypanther1 Posted June 11, 2013 Share Posted June 11, 2013 I had the dumbest look on my face when my friend at the match gave me the advice to set up a barney mag hahaha Link to comment Share on other sites More sharing options...
Adam Sills Posted June 12, 2013 Share Posted June 12, 2013 I never load a magazine to 11 until I'm at the line, on deck, or similar. The first time my gun started unloaded at major match, I forgot to switch to a different starting magazine (I always started with the one marked 11) and got a PE. I keep a few spare rounds in my pocket and top a magazine off before I load the gun. Link to comment Share on other sites More sharing options...
jmbaccolyte Posted June 12, 2013 Share Posted June 12, 2013 Agreed. I load a 17-round mag with 111 rounds and start each stage that way, followed by 10-round mags on the belt. Easy, simple, and as the man said: practical. I thought all mags used had to be of the same capacity. In ESP anyway it says "Competitors must use the same capacity magazines throughout the competiton" Link to comment Share on other sites More sharing options...
motosapiens Posted June 12, 2013 Share Posted June 12, 2013 (edited) Agreed. I load a 17-round mag with 111 rounds and start each stage that way, followed by 10-round mags on the belt. Easy, simple, and as the man said: practical. I thought all mags used had to be of the same capacity. In ESP anyway it says "Competitors must use the same capacity magazines throughout the competiton" By 'capacity', they mean 'number of rounds in the magazine when you start the COF'. Since the 11th round will be in the chamber where it belongs, no problem loading the first mag to 11 rounds. that rule is meant to keep people from switching back and forth between (for example) 7 and 8 round 1911 magazines, depending on when they want to hit slidelock. There are all kinds of bizarre and annoying rules that all stem from the desire to make people shoot to slidelock but not allow them any creativity in doing so. Edited June 12, 2013 by motosapiens Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now