Jump to content
Brian Enos's Forums... Maku mozo!

blueorb

Classified
  • Posts

    135
  • Joined

  • Last visited

Everything posted by blueorb

  1. 32 round limits are only mandatory at level 3 and higher. Learn something new everyday. Thanks.
  2. Is stage 1 a typo? It's showing 34 rounds. I thought the max for a long course is 32 rounds.
  3. +1 on this. Stuart was extremely helpful when I purchased my CZ and did the work for me. He went out of his way to answer all of my painfully bad questions. I also have a good shooting buddy who had a CZ 85 combat mailed out today from CGW. He said that David was very helpful with answering questions. Gun should be in on Monday or Tuesday. No way you can go wrong going with either of those guys!
  4. Can someone clue me in as to what a "crown" is? I was under the impression that a grease ring had to be present for a hit to count. I really need to take the RO class.
  5. I don't shoot a Shadow (I shoot a 75) but I also use a DAA belt with CR Speed pouches with a Blade-Tech holster with Ben's BOSS hanger. It's the shiznit.
  6. I just wanted to add to what's already been said. I have had to call several times in the last two weeks. The wait times are significantly longer in the morning. When I called in the late afternoon I did not have to wait nearly as long. I think a lot of east coasters start calling them right as they open and just swamp their lines.
  7. Hmm, I'd say John's response doesn't do a whole lot to clarify the question. He tells us how to clarify the WSB, but not really how to proceed if the WSB is in fact vague. Sent from my iPhone using Tapatalk Correct, he does not. That is probably because I was more interested in whether or not Sarge's assertion was correct. I would say you certainly can't stand IN the shooting area and just touch something OUT of the shooting area. Not sure what to say after that. So what did he say about standing with one foot in and one foot out? Seems like you got fixated with me saying touching something. He also seemed to think the WSB leaves the door wide open to interpretation. Unfortunately, he didn't say anything else. I quoted exactly what he said. I pointed him to this thread so I was kind of hoping he would post (does he ever post here?). I only hope you were somewhat tactful when you asked him the question because he likes to put them in front sight. Every time I ask him something these days I always tell him not to publish it. Kind of CS if you ask me. Not that I'm wrong or anything! So, you think that me asking John a question is chicken shit? LOL....ok. You were wrong. Don't state your incorrect opinion as fact if you don't want to get questioned on it. Quite a leap. Publishing in a magazine without somebody being aware is CS. Not you asking a question. My apologies. Yes, that was a leap. It's so hard to read between the lines on line. i edited my post out.
  8. Hmm, I'd say John's response doesn't do a whole lot to clarify the question. He tells us how to clarify the WSB, but not really how to proceed if the WSB is in fact vague. Sent from my iPhone using Tapatalk Correct, he does not. That is probably because I was more interested in whether or not Sarge's assertion was correct. I would say you certainly can't stand IN the shooting area and just touch something OUT of the shooting area. Not sure what to say after that. So what did he say about standing with one foot in and one foot out? Seems like you got fixated with me saying touching something. He also seemed to think the WSB leaves the door wide open to interpretation. Unfortunately, he didn't say anything else. I quoted exactly what he said. I pointed him to this thread so I was kind of hoping he would post (does he ever post here?). I only hope you were somewhat tactful when you asked him the question because he likes to put them in front sight. Every time I ask him something these days I always tell him not to publish it. Kind of CS if you ask me. Not that I'm wrong or anything! Edited. My fault.
  9. Hmm, I'd say John's response doesn't do a whole lot to clarify the question. He tells us how to clarify the WSB, but not really how to proceed if the WSB is in fact vague. Sent from my iPhone using Tapatalk Correct, he does not. That is probably because I was more interested in whether or not Sarge's assertion was correct. I would say you certainly can't stand IN the shooting area and just touch something OUT of the shooting area. Not sure what to say after that. So what did he say about standing with one foot in and one foot out? Seems like you got fixated with me saying touching something. He also seemed to think the WSB leaves the door wide open to interpretation. Unfortunately, he didn't say anything else. I quoted exactly what he said. I pointed him to this thread so I was kind of hoping he would post (does he ever post here?).
  10. Hmm, I'd say John's response doesn't do a whole lot to clarify the question. He tells us how to clarify the WSB, but not really how to proceed if the WSB is in fact vague. Sent from my iPhone using Tapatalk Correct, he does not. That is probably because I was more interested in whether or not Sarge's assertion was correct. I would say you certainly can't stand IN the shooting area and just touch something OUT of the shooting area. Not sure what to say after that.
  11. Here is a response from John Amidon regarding this. First the poster is wrong, he refers to the touching of something outside the shooting area as being outside the shooting, the rule he misunderstands is 10.2.1 which is procedurals while shooting. The WSB usually should state the start position is standing outside the shooting area, or toes touching the X,s while outside the shooting are, or they have a small fault line a couple of feet from the shooting area that is the start position. If folks would do these simple things in the WSB, it would solve these type of wrong posts. John Sarge - it appears you either are just wrong in this case or you are quoting the incorrect rule in trying to justify your answer. Based on John's response it appears that a shooter cannot be standing in the shooting area and just touch something out of the shooting area. Which makes absolutely no sense any way.
  12. Yea, I get that and that is the response that I normally get. And then people, that know way more about it than I do, start throwing the rule book in my face and I always lose this argument. I guess it's more of a frustration thing. Like you said, you spend an hour or more building a stage only to have people rip it apart before the buzzer even goes off. I guess I need to be more through in writing the WSB's, as you mentioned.
  13. How does "Start pos. standing outside the shooting area handgun loaded arms relaxed at sides" equal your "touching something outside the shooting area"? Touching something outside the shooting are is not, no matter how you look at it, standing outside the shooting area. I'm all for people that game stages but that is ridiculous. How about just doing what the wsb says? If I were to tell you to go stand on my left you wouldn't stand in front of me, while touching something on my left, and try to claim that you are now "standing on my left". Just my very humble opinion but USPSA needs to stop these start position gaming tactics. Once the timer goes off then game all you want.
  14. +1 on the Springer base pads. Excellent quality. I am running them on the CZC (Mec Gar) nickel plated 17 round mags.
  15. Base pads were waiting for me when I got home from my match on Saturday. Very impressed with the quality of these. Very well made and look fantastic. My pics aren't that great but they at least show how they look.
  16. Bill, I am one of the ones that is showing as being expired. However, I renewed online Thursday a week ago. See this msg on my USPSA page: It looks like you have renewed online. Your profile will be updated when USPSA HQ runs the next monthly membership update. Until that time, use the new membership card we mailed to you for proof of membership." I called last week and advised them that I still do not have my new card yet. What can I bring to you in the event that I do not have my card before leaving for the match? Is the page that contains the above quote sufficient? Thanks
  17. Thanks Stuart! That is what I needed (and wanted) to know.
  18. Hi all. There is a CZ 85 Combat in the classifieds that I am thinking about buying to be used as a back up gun. However, I don't think it has the SRTS installed and that is a must for me. Question is this....if I buy the SRTS (just the disconnector, correct?) is it a straight drop in part? Any fitting involved in that? Thanks.
  19. Wow, those are sharp! I ordered some blue ones that are enroute to me now. Can't wait to get them....I should have picked a faster shipping method...LOL.
  20. Well, that was an easy fix. I bent the sprocket back to it's correct shape and tightened everything back up. Problem solved with both the indexing and the loose brass. Thanks again.
  21. Well, I'll be danged. Thanks for the reply, ToneSurfer. That's exactly what it is. One of the arms on the sprocket is bent to the point where it is contacting and dragging across the ejector wire. I would have never looked at that on my own. However, the wire is sitting pretty close to being flush with the shell plate. I don't have enough room to move it down. I will try and lightly bend the sprocket arm. If that doesn't work I will ask Dillon to send me a new one. No idea how that arm got bent like that....
  22. Hi. I am having an issue with the indexing on my 550. In the video below you can see that every fourth turn of the index sprocket there is an obvious "hitch" in the indexing. It makes the indexing very rough on that 4 turn but 1-3 turns are smooth a silk. It's to the point where I am starting to spill powder when indexing from station 2 to 3. Also, as seen in the second part of the video, my brass is very wobbly or loose in the stations. I have had this problem for a while now and I have, literally, tried to adjust or tweek everything that I know to adjust or tweek. If I tighten the main bolt anymore the indexing gets very rough and eventually locks up. If I loosen it anymore it gets very sloppy and doesn't center at each station. Any suggestions? https://www.youtube.com/watch?v=64TF7u8KPFw
  23. Just place order for 6 blue ones. Added numbering and name. Thanks, Scott.
  24. I am really liking those blue bas pads! Scott - I just tried to order 6 of the blue base pads but see that they are on back order. Any idea how long the wait will be? Thanks,
×
×
  • Create New...