GringoBandito

Don't forget the grip and safeties. Both of these items may help you out. I know that the safety made a big difference for me with comfort. https://www.speedshooter.com/product_detail.cfm?id=ES-STI-CB&n=Extreme-Shooters-Black-Costa-STI-Grip https://www.speedshooter.com/product_detail.cfm?id=WC423S&n=Wilson-High-Ride-Ambi-Thumb-Safety--Stainless

I ran into the same issue with my SV grip. There appears to be a lot of difference in manufacturing specs of different grip manufacturers. My buddy sent me a video showing how to modify the insert and now mine works perfectly. Sent from my Pixel 2 XL using Tapatalk

Looks awesome! Don't forget to tension that belt!

Lol. Glad it worked out for you.

Happy to help. BTW the owner is fairly active on facebook and if you post an issue, they are responsive.

I had a similar problem with mine and was told that the tablet only charges when the main power is on..To fix the issue, I turned the tablet off and turned the main power on to let the tablet charge. Try that for 30 minutes.

FFB makes a really nice shell-plate upgrade and they also have other goodies worth checking out. http://fastandfriendlybrass.com/shop/category.aspx?catid=17

What die are you using in station 3? Looks like a crimp die?

In Nor Cal you will find the following clubs: Richmond rod and gun club, linden, sac valley and yolo. Hit me up via PM if you want to be invited to a nor cal specific shooting page.

check these out as well. After foot surgery, these are the only ones that allow me to stay mobile fro long periods of time. https://www.superfeet.com/en-us/insoles-and-sandals/carbon

I loaded and have shot 4.6 grains of n320 loaded at 1.145 and hit 163 PF. Coated bullets appear to be a little faster that plated. YMMV

I had a hell of a time figuring this out myself..I had 10K extreme .40 180 grains on hand and they would not safely make PF with my new barrel. I finally figured out that I needed a .401 diameter bullet and now I make PF without and pressure signs. The process sucked but I learned a lot along the way.

lol. pics or it didn't happen....

I don't have a TG recipe but I have had good luck with FP and RN bullets in the glock..I did have to load them fairly short though(1.10) for BBI bullets.

I bought my first and only custom 2011 from Glenn and was blown away with the quality of his work. Slide to frame fit is incredible and his finish work is awesome as well. The gun runs like it robbed a jewelry store and is super accurate. I recall that he was a machinist for many years and it shows in his work. Sent from my iPhone using Tapatalk

Nope and nope..The mark 7 and press combo is heavy enough that I have not needed to..

There is an injunction regarding the mag ban that has prevented the law from going into effect. Sent from my iPhone using Tapatalk

I just used the existing one but had to radius the corners to make it work. The instructions lay it all out pretty well. Good luck!

Just buy an Aftec and call it a day. I have never been a fan of having to deal with tuning an extractor from time to time and I don't want to deal with it failing in a match. You will have to modify the firing pin stop so the after will pivot correctly. I installed one on my 2011 build and it ran perfectly without any modifications.

I clean with a brass brush every 500 rounds or so. Usually after one practice session or two and a match. Sent from my iPhone using Tapatalk

Same here. I have been using the lucas extreme for the entire summer and it works great! It is one of the few lubes I have used that does not burn off when you run your gun hard for a day.

Thanks! Sent from my iPhone using Tapatalk

^^^^^^^what this guy said... Sent from my iPhone using Tapatalk

I recently upgraded my 2011 to a steel grip and had to perform some modifications to the ejector to fix some feeding issues. I think I have everything worked out at this point but it got me thinking about bullets feed angle. Would it be possible to tune mags to feed directly into the barrel without impacting the feed ramp? Sent from my iPhone using Tapatalk