Sc0

If you replace IDPA with NRA Precision Pistol then you should be good to go...

Would replace the MIM components and eventually have it rebarreled for tighter lockup. Have 4ea RO's in different calibers and for a competition gun I would start with the above, OEM barrel and bushing fitment is "serviceable".

They are local and have bought parts from plus had gunsmithing performed, no problems at all. 1911, Glock, and Tanfo work.

Can anyone machine a RDS lower on the slide? SIG should just sell the pieces and allow the shooter to put it together his/her way, would eliminate extra costs and leftover parts.

The CMC RPM .45 8rd mags do not accept Dawson floorplates made for CMC Power Mags.

Just ran 8ea stainless Metalform 10rd 9mm mags in MY Springfield RO and only had one issue with a round hitting the feed ramp causing a stoppage out of 100rds. This was using a Ed Brown extended mag release if that makes a difference. Only thing bad I could say about them was that I was blinded a few times as it was sunny outside...

Have the same issue and thought about getting rid of it, will be breaking out the Dremel and keeping it now....

This seems to be the best priced steel framed 92 option. I am also planning on one because, why not? This was built for shooters since it has a proper thumb safety and the shorter reach vertec frame. I REALLY like the fusion frame and slide but Beretta went stupid on the pricing and limited blah blah blah... I probably wouldn't mind it if Beretta sold bare frames and slides...

The older EAA Steel Compacts with the Wonderfinish fall into those requirements... (Could venture into looking at the CZ75, PCR, P01 Compacts.) Am waiting for someone to bring in a large frame compact with the square trigger guard competition frame...

Not bad pricing, when I grabbed one a few months ago they were at $450. LOK grips just announced some Thin options for them. I installed the Elite hammer and D spring, am still contemplating doing the "G" drop in parts since they are laying around. Definitely wasn't happy seeing the whole paragraph etched on the slide...

M17 with the X5 grip assembly, best of both worlds.

Best accuracy that your able to get at 50yds from a Tanfo? Ideas to increase accuracy?

Tighten up the rail fit and remove the flex from the trigger...

When looking up modifying magazines i came across a picture of using a drill bit's round shape to spread the lips apart and a drill press to apply the force. They had a vice holding the mag tube as well, guess this process is repeatable with very small increments.

So PD has a mill? Perhaps mill the slide to fit the dot, and then modify something like a RDS cover from a CZ to fit for going back to irons? https://czcustom.com/cz-parts-all/red-dot-mounting/rds-plate-fixed-sh-sight.html (Able to D/T an S3 frame for a barricade shroud?)

Possible Multi-Sight platform? I like it!

Yup, both are right! I have a frame stamped 13 and one stamped 16 in the inside trigger area. The 16 frame has the lightened backstrap and the reprofiled dustcover that is beveled at the end. The 13 frame has no bevel but it's a little thinner around the picatinny rail and has more metal in the backstrap. Of course then you have the hand finished portion, the 13 frame is a wee bit wider at .997 vs the 16 frame which is at .990. (The 13 frame is a .40, 16 frame is 9mm.) Need to stop fiddling with them and shoot more...

Yes, both are S3's except one is setup as SAO with magwell for Limited class while the other still retains double action capability for Production. New one is a 2017 which is tight in the holster, the older pistol is the loose one.

Been practicing my draw and par times on my stock 3's with a Ghost holster and discovered something. My limited pistol slides in and out of the holster REALLY easy, I have to almost tighten the thumb screws fully to just have tension on the pistol. Now my production pistol is MUCH tighter in the same holster with the thumb screws almost falling off. After about 50 insertions involving the pistol scraping a lot of plastic out, it is starting to smooth out. I can't wait to get the mic to compare them. Guess quality control tolerances apply to the entire pistol and not just the internals...

Think the X simplified the adjustments so less that would come loose. On my magnetic RM I had to file/sand the delrin block to fit the trigger guard for the system to work properly. (I had to do the same treatment on the Glock inserts for all my plastic pistols to fit as well.)

file/grind the screws down to fit? I have a pair of EGD grips with shortened PD stainless grip screws with reshaped smaller heads to fit the screw pocket reliefs. The EGD grip screws had some quality control problems and the PD screws were a lifesaver!

USPSA Production legal modification? Seen different answers when searching different forums on the same topic. Would like to Metaloy/Melonite my frame and slide on a Stock 3, I would like to incorporate any machining before these finishes are applied.

On my recent Stock3 I had to hammer the front sight out and hammer the DP sight in. If your having those problems, you might need to break out the green loctite #620 bearing mount compound to use in the dovetail before inserting the sight. I would say that the #620 Green stuff is nastier than the red stuff. On a side note, those tiny screws on the DP sight should be larger.

$10k+

Steel frame! http://www.beretta.com/en/premium-world/92-fs-fusion/