SD1

Take out primers and try another brand to confirm the alignment is off

Xtreme 147 1.150 Dawson front sight +.5 mm

There's Wheaton in Greenville

just minutes, write down how many spacers you use for your bullets. on the under side of the nose guard, put thin tape lines for each bullet you load. that way you can hit your setups with out any delay.

G34 loves 147s. Stupid accurate. no key holeing. back of the crimp people.

C&M if you need beast mode. http://www.candmtopline.com/tumblers.html

its new in store. if that helps

Just curious.... whats the differences in a 75B DA and a Shadow?

remove primer arm, tool head and then remove shell plate.

the link works correctly

Got around to some testing tried different lengths and power levels. Xtreme 147s at 1,15 will stack six pills in a 1 inch hole at 75 feet.

thats 9mm major

would that hammer clear a LPA sight?

Try reflashing the firmware. You probably will be g2g after that

the shorty 9s are probably S&B. if you have only had a couple of HIGH PRIMERS, it was probably you short stroking the handle.

Thank you.

looks good. what is the height distance from top of slide to top of the Hajo sight? could you get me a measurement, trying to figure which way to go on the rear sight.

HAJO sight is a nice to easily get a height adjustable rear sight (if you want that) on a standard shadow, but it is taller, sitting more on top of slide. You can get LPA target sight option which is just about as low as fixed sight, but adjustable, it's just a custom sight cut to get when you order, or having it done later. so the LPA Rear sight will work on SP01s?? its impossible to get CZC on the phone.

awesome thread. STICKY vote here

My bad....beer and posting dont mix

Got mine the other day. Man.... Trigger is sick. Glocks going to the safe

Or get a 40 backup

congrats

nice write up

2 would be perfect. use Hornady Lock rings and switch calbers in minutes