SD1

We tested the older small Nooks, they were a little slow. But we were informed that they did not make those anymore and had no warranty. But I have not researched this. Was guided toward the Kindles. But that is sounding like bad info. Post some links of what you suggest. Thank you

What do you suggest the Glowlight? Or???

Any other suggestions on a black and white screen? We don't want to go NOS. NOOKS.

Has anyone been able to put Practiscore on a P White? Amazon states they are running a modified Android system? thanks

MBF hands down

Where are breaking on the arm?

I would suggest a heavier recoil if using stock ammo.

im using a .195 close range shots are dead perfect but the 60-70 footers are a little low.

thanks sir

Order the next height up from Dawson and file the top down. I thought about that, but CZ Custom's website says that the Accushadow needs a 7.5mm front sight. Converted to inches, that's 0.295 inches. The tallest sight I see on Dawson's site is 0.275. Of course, that may still work since I'm running a HAJO adjustable rear.....but they're out of stock at the moment. *sigh* Czcustom measure sights differently. .215 is the ticket what weight pills are you using?

So, would you recommend it as a first shot timer? It seems like it has some features that would be very nice, but is it worth 30 bucks over a pocket pro? to me yes. you can link it to your smart phone or a tablet. setup drills, upload times and track your progress.

i really like my Shotmaxx. its g2g with all the updates.

your final die, that is seating the bullet. top of die will un screw. remove middle section and flip

one side should be inverted cone other side of seated stem should be flat

bell and flip seater stem to the flat side as stated.

If case lube gets inside the mouth of the case, powder will stick to it, but after 15 yrs you already know this. boom.... this

are you loading with the cases lubed?

back off your crimp, pull bullet and make sure there is no crimp impression on the bullet. Do a squeeze test Make sure rounds don't set back. Don't worry about the physical measurement. use caution loading long in XD. Bullet tip catches in mag release hole.

Good deal. it's probably just to much spring pressure on one side of the STUPID COTTER PIN. go to hobby store and get a stainless hinge pin, smaller diameter of the cotter pin and same length, I think mine is a Traxxas . it will run smooth as silk and never skip a primer.

Make sure primer punch and Seat are level with casting of the press

buying a new pistol keeps my interest level high and keeps me interested. the wife does not agree though.

which case feed plunger are you using? looks like alot of extra play. the plunger sticking is definitely a issue

Primer tube assembly was probably backwards. +100 on setup with out the tube

!

Horandy Lock Rings is the cheap way out. if you get another tool head i would still use the Hornady Rings