SD1

Side to side movement. ..... Check Allen screw in left side of Crank

Warranty is the only negative

I had a mag do the same. Check spring, my issue was the spring would cock to one side And jam. Mags that had springs stay straight in mag would have no issues. 147s stretched to 1.115. Thanks for shipping brass to Buster btw. D

It's probably the primer ram spring. I have seen a few of these sent extra. Pic would be best

Must have been a bad Apple. . . Mine runs flawless. . Good luck

Possibilities. ....... 1 dull blade (RiggerJJ ) 2 to fast of a stroke....go steady let the carbide cut and clear shavings 3 you have LC brass with factory perforations on it still due cutting length. Some LC brass will be cut to 1.755 and still have the factory perforations On the end of the brass. You will have to determine that because it's hard to see From pics. Tumble large batches for about 3-4 hours and they should be G2G

+1 TG go to gun shows, that seems to be the place to find powders

good deal brother. thanks for update, it may help some one else!!

my wife is gonna be pissed cause i order one because of yall!!!

I had posted about 2 months ago on thread that I have never Had defefective Winchester primers. But I got bit! Soon after

I am leaning towards you having defective primers. I just had a batch myself.

thanks, i am down to the Armadillo or Comp Con.

Mr Bullet Feeder and RF100. It will be all you need

Ok. I have processed brass for one customer who purchased OFB. It was wet tumbled and sat for a unknown period. The primers were like corroded and sort of stuck.

Are you wet tumbling?

Sabotage.

I use the Hornady dies. I don't have any issues. I load nothing but LC brass. Try filing the d-priming tip flat before you go nuts.

sorry i havent read the whole thread...... but i use to play alot of sponsored softball. check out Boombah.com look into their Turf shoes, they have a millon color combos and will do customs.

I suggest going to Gavens site.....Ultimate Reloader.com And watch his videos.

they are Berrys

you can do 2.9 gr with stock spring. 1.115 OAL

Stock striker use stock spring. Lightened after market strikers use light spring. +1 on Sarges primer statement

Use the Black Loc-tite when you get new pin. That stuff dont play

Good deal

Thanks. Brand names really help.