CZ85Combat

N320 Very clean burning and soft shooting

You can, others have tried. Comps on a 16" Carbine don't do much.

ACCU Shadow

1.120" is not short in a TS

In my CZ TS 40 180gn Blue bullets 4.5gn N320 @ 1.125 946 pfs 170pf

Gunk under the extractor? Have you ever cleaned it?

Only two things are going to kill it. #1 they will not ship enough in to the US. #2 the chamber will be short and people will have problems using SD ammo.

The AR 15 white spring is the 80% spring..... JPSCS-SPRING15-80: 1 side white JPSCS-SPRING15-85: 1 side black JPSCS-SPRING15-90: 1 side green JPSCS-SPRING15-95: 1 side yellow JPSCS-SPRING15-100: no color

Czechmates have a short chamber and most ammo will not seat if the OAL is longer then 1.120" with most bullets.

Carbine or SBR?

Comps on anything other then an SBR don't do much. Loading light loads and tuning your recoil system does way more then a comp.

Is CZ coming out with a Striker fired gun? CZ P 10 C 9mm

#1 NO

the JP BCG will not work in the Willlson Commmat AR9

Fast powder is the way to go. I am using 2.5gn of N310 with 147gn Blue Bullet @ 1.140, 901 fps, 132pf standard deviation of 4 fps

Why are you loading so long? Did you do the push test?

I can reload with the best of them, because I have put the time in with reloading. Now with that said, in a long course of 32 round if you need more then 41 rounds you have other problems and the reload is the least of your worries.

They seize up almost into battery as the bullet is too long and hits the rifling.

Glock mags. its not the mags. the burst fire is the biggest problem, and hit or miss on the light strikes. the light strikes I think are from the hammer following. if you look at the video you will see the erratic ejection pattern, (forward,back & middle). this has to do with the BCG plunger ejector.

Yes you can ream. But you don't want to use the same ammo that you use in your 9mm pistols if you are shooting competition, your 9mm pistol load will be 140-150pf in a 14-16" barrel carbine. you can down load .5-1.0gn to make 130pf in your carbine, the same load in your pistol would be 118-120pf.

No reloads. get a 31 rounder add the TF+10 base pad, with 41 rounds you don't need to reload. for classifiers get 4 OEM 17 round mags.

Chang the spring and you will be good to go

Yes I have had the same issues with my Wilson Combat. sent it back, they changed the BCG, that did not fix it.

why would you need one?

I have one, If I had to do it over I would get the JP GMR-13. reliability ????? https://www.youtube.com/watch?v=Fv13NmAiSCM&feature=youtu.be